Laser Vago batten set and Laser Vago sailboat sails in stock at Sailcenter

The Laser Vago Mast Shroud comes wirh attachement riggin for the mast for an easy install. One shroud per pack. Specifications Material: Stainless Steel Laser part no: 90215

The Laser Vago Jib Halyard comes with a length of 3-strand rope, stainless steel wire, and a crimped eye for rigging. Feature Jib wire halyard and spliced rope tail Specification Laser part no: 81032

Standard Nylon Washer for the Laser-branded sailing trolleys.

The Laser Bahia Mast Step is supplied by RS Marine. It comes in aluminium and is use dto attach the mast to the deck of the Bahia.  

Laser Drop Nose Pin to fit the Vago/Bahia/Pico boats. Specifications Size: 6mm x 64mm Material: Stainless Steel

The RS Laser Bahia Mast Shroud Lower comes with a pre-spliced eye, rigged key fitting and wire for easy install.

The Laser Pico Mast Step fits the mast to the deck of your boat. 4 holes to bolt it to the hull. Specifications Material: Plastic Colour: Black Laser part no: 91299

The 25mm plain bearing block range is one of Sea Sure's oldest and best selling ranges. The range uses marine grade stainless steel side plates and rivets with an arnite (plastic) sheave which is incredibly hard wearing and light. This range could be...

The Laser Vago Trapeze Kit contains everything you need to install or replace a trapeze on your boat including wire (with pre-rigged key fittings), handles, camcleats, blocks and rope. Pre-assembled in an easy to use pack. Features 2 x trapeze per...

The Laser Bahia Cap Shroud is supplied by RS Marine and comes complete with rigging attachments for an easy install. Specification Stainless steel wire

Laser Top Vang Block with V-Jammer is a clasic non-race jammer for the Laser Vang system. Made from aluminium. Specifications Sheave diameter: 20 mm / 40 mm Max line diameter: 6 mm

The Laser Funboat Trolley is designed to help you launch and take your boat out of the water. The frame is made from galvanized steel and comes with inflatable tyres that can be replaced if needed. The trolley straps to the back of the boat and the user...

The Laser Trolley Stacker is a galvanized support that fits onto the side of your Laser trolley and allows you to carry two or more boats at the same time. Features Water-resistant galvanized steel Fits all Laser Standard Sailing Dinghy trollies

The Laser Pico Trolley Stacker is a galvanized support that fits onto the side of your Laser trolley and allows you to carry two or more boats at the same time. Features Water-resistant galvanized steel Fits all Laser Pico Sailing Dinghy trollies

A set of Laser MK1 Battens to suit Laser Standard, Radial, and 4.7 Sails. Features The old-style design is no longer used for racing events 3 per pack (suitable for one sail) Strong and flexible plastic design Comes with batten caps to protect the...

Laser XD Deck Plate Stainless Steel Features Deck plate to attach the outhaul and Cunningham blocks Stainless steel

The Laser Bahia Trolley Stacker is a galvanized support that fits onto the side of your Laser trolley and allows you to carry two or more boats at the same time. Features Water-resistant galvanized steel Fits all Laser Bahia Sailing Dinghy trollies

The Laser Funboat Mainsail Small Rig is a direct replacement for the Laser Funboat sailing dinghy. Features Small rig size Extra-strength polyester Training or club use Specifications Material: 6.3oz Polyester Twin Ply Leach Laser part no: 95700

The Laser Standard Sail Mk II Folded is an official replacement for the one on your sailing dinghy and can only be used for recreational (non-race) use. Features Comes with The Laser Class button and a folded sail bag Not allowed in ILCA...

The Laser Vago Deck Cover 87113 is a waterproof polyestercover to protect your sailing dinghy from while not in use.

Our Laser Vago training jib sails are made from a hard-wearing ripstop racing Dacron material, 5.2oz weight. Our training jibs are white and come with all of the reinforcement you would expect including at the batten pocket areas and corners. Eyelets are...

RS Sailing Toestrap to fit the middle section of a Laser Pico Dinghy. Specifications RS part no: PIC-HF-400

RS Laser Bahia Gennaker Sail - New Design Specification Colour: Red

The Laser XD Power Pack contains Harken Main Sheet & Traveller lines, and also the blocks for each, included in a handy set. Features Pre-cut sheets for the Laser Standard Taveller and Main Sheet Main sheet, Stand-up spring, and traveller block...

RS Laser Bahia mainsail in dacron, supplied with battens and sail bag - Original Laser Performance version Specifications The Laser Bahia mainsail size is 9.50 m² This is the smaller reefable mainsail Supplied, including a long sail bag Material:...

The Nuova Rade Fuel Tank Cap Blue is a replacement fuel cap for the Nuova Rade Ercole and Sogliola fuel tanks. Features Comes with bleed valve to stop pressure build up Fuel resistant o-ring

Description Ensure your safety on the water with the LALIZAS Auto Re-arm Bobines Set of 4, designed specifically for adult and child inflatable lifejackets. This essential accessory kit is compatible with a range of LALIZAS models, including the Alpha,...

Description The Lalizas Expanding Drain Plug, with a diameter of 35mm, is an essential accessory for sealing drainage holes in boats, ensuring no unwanted water leakage occurs. This high-quality plug is designed to expand when the lever is operated,...

The Nuova Rade Telescopic Boat Hook with 2 ends comes with a grabbing hook to catch mooring lines and a orange cushioned head to push away objects. The boat hook is extendable up to 196cm and comes in aluminium. Features Lightweight and easy to...

The Nouva Rade Top Line Deck Hatches are suitable for vertical or horizontal installation typically outdoors on boats. The top line feature means the hatch lid covers the frame when closed hiding the installation screws and creating a neater appearance...

Introducing the Nuova Rade Hatch 270mm x 370mm Black (Part No. 197267), a premium deck hatch designed for durability and functionality on any sailboat or yacht. Crafted in Italy from high-quality, UV-resistant ABS plastic, this hatch is built to...

Description Introducing the Labcraft Slimline PIR Motion Sensor Switch, an innovative solution designed to enhance energy efficiency and convenience in any vehicle or interior space. This compact, ultra-slim switch utilizes advanced passive infrared...

The Opinel Folding Knife is a staple of marine activities and can be seen used in work or leisure settings. The folding knives comes in size No. 7 with a 7cm blade making it handy as a pocket knife. The knife now comes in pure stainless steel...

The precision Victorinox Paring Knife is the ultimate multitasking, go-to knife.  Ultra-sharp, wavy edge with an ergonomic handle. Features Stainless steel Swiss made paring knife with a serrated edge Dishwasher safe Specifications Length of...

The precision Victorinox Paring Knife is the ultimate multitasking, go-to knife.  Ultra-sharp, wavy edge with an ergonomic handle. Features Stainless steel Swiss made paring knife with a serrated edge Dishwasher safe Specifications Length of...

Classic Ibberson 2 Piece Riggers Yacht Kit. Features 10cm straight stainless steel blade Stainless steel knot melting tool Leather sheath

The Loewen Messer Filleting Knife 325R comes with a black plastic handle and water resistant stainless steel blade. Its similar to the Loewen Messer 825 Knife but this one comes with a wider blade for heavier duty work. Specifications Stainless steel:...

A classic Loewen Messer Knife 822 with a wooden handle typically used for commercial fishing or any heavy duty use. The blade is a thick water resistant carbon steel with a straight edge. Specifications Wooden handle - Bubinga wood Blade: 7cm Carbon...

The Ibberson 5 Piece Yacht Kit is a multi pack of tools used for sail maintenance and repair. Features Stainless Steel Blade Riggers Knife with separated edge for rope cutting Stainless Shackler Spike Plated Pliers Screwdriver Adjustable Wrench Black...