The advantage of a resettable circuit breaker over a fuse is well known however people find circuit breakers more expensive and difficult to install. The ST CLB Circuit Breaker Block solves this issue by using the compact, snap-in-place CLB resettable...

Common 150A BusBar - Four 1/4"-20 Studs Features The industry standard busbar for positive distribution The industry standard busbar for the collection of negative or AC ground circuits Specifications Maximum Voltage: 300V AC, 48V DC Number of...

M-Series Battery Switch Link Bus Features Use as a paralleling devise for the M-Series Battery Switches. Tin-plated copper for maximum conductivity and corrosion resistance 250 Ampere continuous rating Sold in packages of 2 Specifications Weight: 0...

MaxiBus 250A BusBar - Six 5/16"-18 Studs Busbars are used to consolidate multiple wires or feed multiple circuits Features Insert molded stainless steel studs eliminate need for securing nut and allow high torquing for excellent electrical...

DC 13 Position Features All positive, negative and grounding buses installed, fully pre-wired Panels with meters include toggle switch for mounting up to 3 battery banks All panels with analog meters are owner upgradable to 24 Volts with 8240 or 8243...

Water-Resistant Circuit Breaker Switch Panel - Camo, 4 pos. + 12 Volt Socket and Dual USB Charger Designed for exposed mounting applications. Features Illuminated 15A circuit breakers provide switching, “ON” indication and overcurrent...

e-Series On-Off Battery Switch Features Switches a single battery to a single load group Includes AFD (Alternator Field Disconnect) Ignition protected - safe for installation aboard gasoline powered boats Case design allows surface or rear panel...

Water-Resistant Circuit Breaker Switch Panel - Camo, 6 Positions Designed for exposed mounting applications. Features Illuminated 15A circuit breakers provide switching, “ON” indication and overcurrent protection Industry-standard sizes and...

AC Main + 3 Positions [European] Features Red reverse polarity indicating LED All hot, neutral and safety ground buses installed, fully pre-wired All circuit label positions are backlit on standard panels - No kit required "ON" indicating LEDs installed...

DC 10 Position Features All positive, negative and grounding buses installed, fully pre-wired Panels with meters include toggle switch for mounting up to 3 battery banks All panels with analog meters are owner upgradable to 24 Volts with 8240 or 8243...

Blue Sea Contura Water Resistant 12V DC Panel - 4 Position Features Will withstand the water exposures normally encountered in above deck Applications: salt spray, rain, hose washdowns, momentary immersions ON-OFF Contura Switches ON indicating LEDs...

HD-Series Heavy Duty 3 Position Selector Battery Switch with AFD Switches isolated battery banks to all loads. Features Includes AFD (Alternator Field Disconnect) Ignition protected - safe for installation aboard gasoline powered boats Case design...

The Blue Sea Systems Solenoid ML 500A 24V ACR (Automatic Charging Relay) with Manual Control is a high-performance, marine-grade battery management solution. Designed to automatically combine and isolate battery banks, this bi-stable relay ensures...

Allows the use of Class T fuses for fast acting circuit protection of inverters and other electronics. Four stud design provides ample access around connecting stud to install large cable lugs without obstruction from the fuse Insulating cover satisfies...

Barton 2-hole fixing Pad Eye manufactured from AISI 304 stainless steel. Featuring a solid stainless steel bar welded for extra security. Specifications Bar dia.: 4mm Height: 16mm Hole Centres: 30mm Weight: 18 g Dimensions: 45 × 15 × 21...

Barton PVC winch handle pocket. Manufactured from flexible dip-moulded PVC to enable a wide range of handle types to be stored quickly and securely. Features Includes a draining hole at the base Suits most winch handles  Specifications Length:...

Barton 60304 double fold flat, pad eyes in stainless with dampener pads Specifications Eye Dia: 6mm Overall width: 51mm Overall Length: 100mm Weight: 95 g Dimensions: 98 × 52 × 9 mm Bore Diameter (mm): 6mm Fastenings: 6mm Height of deck when...

Manufactured from high impact polycarbonate, this Barton deck hatch features an easy start thread and a built in ‘O’ ring seal. Specifications Weight: 93g Outside Diameter: 146mm Inside Diameter: 103mm Cut-out dimensions: 114mm Depth under...

Barton 2-hole fixing Pad Eye manufactured from AIS304 stainless steel. Featuring a solid stainless steel bar welded for extra security. Specifications Bar dia.: 8mm Height: 28mm Hole Centres: 55mm Width: 80mm Weight: 68 g Dimensions: 80 × 26...

Designed to fit neatly inside the collar of any Baltic inflatable life­jackets, a must to prevent water and spray from entering the airways. Features Unique stay system supports the hood away from the face coupled Ventilation to stop condensation...

The Baltic Nature Buoyancy Aid (Black, size for 30–50 kg) is a compact, lightweight 50 N flotation vest aimed at smaller adults or lighter users. Designed for inshore boating, sailing, kayaking or general water‑based leisure, it offers reliable...

This throw rope integrates perfectly into the Green Jacket’s rope ready pocket, where it is always on hand (even when your boat happens to be downstream). Specifications Length: 45ft./ 15 m Working Load: 1800 lbs/820 kg Diameter: 7 mm

This eco-friendly wall clock is made from 100% recycled plastic, helping reduce waste while delivering durable, long-lasting performance. Its clean, minimalist design features easy-to-read numerals and silent sweep movement (no annoying ticking), making...

Keep your gear safe and dry no matter the conditions with the Aquapac 744 Large Multipurpose Case – the ultimate waterproof drybag for marine, outdoor, and travel use.With a generous 7-liter capacity, this rugged case easily swallows cameras,...

Protect your Eagle 9 display from the harsh marine environment with this quality suncover from Lowrance   Features Compatible with 83/200 HDI, 50/200 HDI, SplitShot™ HD and TripleShot™ HD Transducers IPS screen, viewable from all...

Protect your Eagle 7 display from the harsh marine environment with this quality suncover from Lowrance

Protect your Eagle 5 display from the harsh marine environment with this quality suncover from Lowrance. Features Protects the marine environment Suncover for Eagle Displays

Protect your Eagle 4x display from the harsh marine environment with this quality suncover from Lowrance   Features Protects the marine environment Manufacturer advises utilizing the Lowrance Eagle 5" Suncover  to protect your device against...

Heavy duty deck filler key suits larger sized plate with round keyhole larger than 8mm. The Key can be splayed to fit differing hole centres Features Diameter: 8m Zinc-coated steel  Adjustable to differbet hoel centred

Genuine OEM replacement G13 lamp holders from Aqua Signal (part number 9840008600), sold in a convenient pack of 5. These high-quality, non-shunted tombstone-style sockets are specifically designed for marine applications, including fluorescent lighting...

The Aqua Signal Locking Screw for Series 70 is a high-quality accessory designed for secure assembly of Series 70 navigation lights and related components. Crafted from durable materials, this locking screw ensures corrosion resistance and long-term...

Aqua Signal Series 70 Replacement Seal (Gasket / O-Ring) the essential OEM sealing component for maintaining watertight integrity in your rugged Aqua Signal Series 70 navigation lights (for vessels ≥ 20 m LOA). Manufactured from high-grade,...

The Aqua Signal Series 70/70D Lamp Holder is a genuine OEM replacement component designed for the robust and highly reliable Aqua Signal Series 70 and 70D navigation light fixtures — the industry standard for commercial vessels ≥ 20 meters (65+...

The Aqua Signal Bremen Searchlight Clamp Bracket is a precision-engineered mounting solution designed specifically for Aqua Signal Bremen Series searchlights. This robust clamp bracket provides secure, vibration-resistant installation on rails,...

Aqua Signal Seal Beam 12V Halogen The Aqua Signal Sealed Beam Unit (12 V / 50 W Halogen) is a high-performance lighting component designed for demanding marine environments. With halogen illumination at 50 watts and a sealed-beam construction, this unit...

The Aqua Signal Replacement Glass Lens for 500W Searchlights (part number 9840066900) is a genuine OEM spare part designed to restore full optical performance and weatherproof integrity to your high-power marine searchlight. Crafted from durable,...

Restore reliable lighting in your marine fluorescent fixtures with this genuine spare part pack from Glamox Aqua Signal (formerly Aqua Signal). This set includes 5 high-quality G13 bi-pin lampholders (also known as tombstones or lamp sockets),...

Restore reliable lighting in your marine fixtures with these genuine Aqua Signal G13 Fluorescent Lamp Holders, complete with integrated starter holder. Designed specifically for demanding boating and marine environments, these high-quality replacement...

The Aqua Signal R7S Halogen Lampholder is a genuine OEM replacement part engineered for demanding marine environments. Designed specifically for Aqua Signal floodlights and searchlights (such as Series 1076 and similar halogen models), this high-quality...

The Aqua Signal 9840082800 is a genuine OEM replacement lampholder designed specifically for high-power halogen applications in marine lighting fixtures.This pack includes two R7s lampholders rated for 500W halogen lamps, commonly used in Aqua Signal's...