Switching & Connectivity

Features Meets american boat and yacht council (ABYC) standards The industry standard circuit breaker for Blue Sea Systems" electrical panels Combines switching and circuit protection into a single device "Trip Free" design cannot be held "ON" during...

Using the Victron VE.Direct to Bluetooth Smart Dongle you can display your BMV or MPPT information on iOS and Android devices, using the VictronConnect app. View wirelessly on your phone information, such as battery status and solar panel power,...

Rule Bilge Switches are simple, classic-looking on/off switches with enamel-coated stainless steel finish. These switches are simple enough to screw onto a boat dash and then be wired up directly to the battery. The switch itself uses crimped spade type...

The VE.Bus Smart dongle is two products in one: First of all it is the bluetooth accessory for Victrons range of inverter/chargers: Multis, MultiPlusses, MultiPlus-II, MultiGrid, MultiGrid-II, Quattros, and the series of Phoenix Inverters with a VE.Bus...

The MK3-USB allows the following products to connect to a computer for configuration and firmware updates. Use For Multi, MultiGrid, MultiPlus, MultiPlus-II, Quattro, Inverter/Charger settings in ECOmulti, EasySolar, EasyPlus, and Inverters with a VE.Bus...

The VE.Direct to USB interface connects products with a VE.Direct connection to devices with a USB port, for example a computer. With this cable it is also possible to connect more than two VE.Direct products to a single CCGX. Optional Extra Color...

Victron GX LTE 4G Modem & GPS Accessory for GX devices -The GX LTE 4G is a cellular modem for our GX range of monitoring products. It provides a mobile internet connection for the system and connection to the VRM Portal. It works on 2G, 3G...

Venus GX The Venus GX provides intuitive control and monitoring for all Victron power systems. The list of Victron products that can be connected is endless: Inverters, Multis, Quattros, MPPT solar chargers, BMV battery monitors, Lynx Ion + Shunt and...

The GX Touch 50 and GX Touch 70 are display accessories for Victron's Cerbo GX. The five inch and seven inch touch screen displays give an instant overview of your system and allow to adjust settings in the blink of an eye. Simply connected to the...

Color Control GX The Color Control (CCGX) provides intuitive control and monitoring for all Victron power systems. The list of Victron products that can be connected is endless: Inverters, Multis, Quattros, MPPT solar chargers, BMV battery monitors, Lynx...

Mastervolt offers a variety of useful MasterAdjust software. This software can be used by the installer or experienced user to accurately align the Mastervolt equipment to its relevant application. Parameters such as voltage, current, switch-off points...

This weather-resistant control button from Mastervolt, made of polycarbonate composite, can be easily clicked onto the base waterproof switch. There are more than 60 different pictograms/symbols in stock. A key for removing the control button again is...

This weather-resistant control button from Mastervolt, made of polycarbonate composite, can be easily clicked onto the base waterproof switch. There are more than 60 different pictograms/symbols in stock. A key for removing the control button again is...

This weather-resistant control button from Carling, made of polycarbonate composite, can be easily clicked onto the base waterproof switch. There are more than 60 different pictograms/symbols in stock. A key for removing the control button again is also...

This weather-resistant control button from Mastervolt, made of polycarbonate composite, can be easily clicked onto the base waterproof switch. There are more than 60 different pictograms/symbols in stock. A key for removing the control button again is...

Circuit breakers are the 'safety stop' signs of your onboard electrical system, they secure the electrical circuit against overload or short circuits. For equipment that is connected directly to the circuit breakers - such as lighting - they can also act...

Circuit breakers are the 'safety stop' signs of your onboard electrical system, they secure the electrical circuit against overload or short circuits. For equipment that is connected directly to the circuit breakers - such as lighting - they can also act...

Switch Input 3 makes Carling switches compatible with MasterBus. Multiple functions can be easily linked with this module. This product does not include frame or switches. General Specifications MasterBus powering: No Delivered with: MasterBus...

This weather-resistant control button from Mastervolt, made of polycarbonate composite, can be easily clicked onto the base waterproof switch. There are more than 60 different pictograms/symbols in stock. A key for removing the control button again is...

Connect up to four switches to the MasterBus network. Delivery includes connection cables. General Specifications MasterBus powering: No Delivered with: Cable with plug, MasterBus cable, MasterBus terminator, manual Dimensions (H x W x D): 66 mm (2.6")...

MasterBus controllable potential-free contact, with alarm notification on the onboard system (low voltage or no AC), usable as CSI alarm contact. This potential-free programmable contact can be customised and programmed to give your MasterBus network...

Battery monitor, 12/24 V DC with large, splash proof display (IP65) and power bar. An affordable battery monitor that does exactly that: providing critical information about the status of your battery bank under all circumstances. Moreover it will warn...

Connect conventional Mastervolt products to MasterBus. Data becomes permanently available to allow configuration, operation and monitoring via EasyView 5 or PC. Suitable for Masterlink BTM-III, Mac and Magic DC-DC converters. General...

The MasterBus USB Interface enables you to read and configure the MasterBus network via your PC. General Specifications MasterBus powering: Yes (when the PC is switched on) Delivered with: USB connection cable, MasterBus cable, MasterBus terminator,...

The MasterBus NMEA2000 Interface provides the Masterbus network with NMEA information, and vice versa. General Specifications MasterBus powering: No Delivered with: NMEA connection cable, MasterBus cable, MasterBus terminator, manual Dimensions (H x W x...

The DC Distribution 500 is the smallest distribution model available. It connects up to four DC devices, such as a battery charger, inverter, alternators and solar panels. With the plug & play cable it can be easily connected to the MasterBus network...

MasterShunt is the heart of every battery powered energy system. This integrated battery monitor shares information about the battery bank with other MasterBus, CZone or NMEA 2000 enabled devices such as battery chargers, inverter/chargers and displays...

On/off control for the AC Master sine wave inverter with a clear on/off indicator which indicates when the inverter is active. In addition, the AC Master Remote Control makes it possible to turn the inverter on or off automatically by means of a 12 volt...

Indication of AC consumption, AC voltage, fuse value of the grid/generator ­connection, with Power Sharing. Mounting materials and communication cable included. This remote control panel is not compatible with mastervision. Technical Files Dimension...

Features “Trip Free”-cannot be held closed after trip Ignition protected-safe for installation aboard gasoline powered boats Combines switching and circuit protection into a single device Provides overcurrent protection for inverters, bow...

Features Weatherproof Push-to-reset operation Can be used as Main, Branch, or 24 hour circuit protection Compact design enables high density circuit protection configurations “Trip Free” design cannot be held “ON” during fault...

Features Weatherproof Push-to-reset operation Can be used as Main, Branch, or 24 hour circuit protection Compact design enables high density circuit protection configurations “Trip Free” design cannot be held “ON” during fault...

Features Weatherproof Push-to-reset operation Can be used as Main, Branch, or 24 hour circuit protection Compact design enables high density circuit protection configurations “Trip Free” design cannot be held “ON” during fault...

Features Weatherproof Push-to-reset operation Can be used as Main, Branch, or 24 hour circuit protection Compact design enables high density circuit protection configurations “Trip Free” design cannot be held “ON” during fault...

Features Provides electrical insulation for exposed panel backs Provides mechanical protection for panel backs protruding into lockers Lightweight material is easily drilled for wire entrance and exit Meets ABYC requirements for panels with combined AC...

Blue Sea AC Rotary Switch Panel 30 A 3 positions + Off and 2 Pole as under 8358. Fully wired and ready for installation. Blue Sea 230 V AC Source Selector Switch Panel with rotary switch x 3. If either the Blue Sea Switch front or back is to be exposed...

Blue Sea 360 System Distribution Panel BS1217 is one of the most opular models but please contact us for more information on other configurations which may suit your requirements. Features Includes 4205 - square format label set Available with...

Features Isolates the Engine circuit from the House circuit Allows emergency cross connect between isolated battery banks Protects electronics from sags and spikes caused by engine cranking Specifications Number of positions: 3 Nominal voltage: 12 V...

Features Red reverse polarity indicating LED Safety ground screw on panel back Combines switching and circuit protection into a single device "Trip Free" design cannot be held "ON" during fault current condition Specifications Nominal voltage: 230 V...

The Blue Sea Contura Switch Mount is perfect for installing up to 3 switches on a dashboard or fly bridge. The switches clip in and are sealed with the gasket supplied with the Switch. The outer side of the mount should be sealed if required to be...