Sailboat Hardware
-
Harken System A 40mm Receptacle CB Battcar 3830 - 22mm
Harken
€378.95A Harken battcar system along with full-length battens helps raise, douse, and reef with ease and acts as extra crew if you're sailing shorthanded. Battcar systems outperform in-mast or in-boom furling, cost less, and you don't need to recut your sail...HK3830€378.95 -
Harken Two-Speed Mainsheet Self-Contained Tune System 383 - 4:1/8:1
Harken
€1,205.95Harken gross-trim/fine-tune mainsheet systems are easy to install and use. These optimized systems decrease overall line clutter because they use less line than traditional gross-trim/fine-tune systems. Specifications Minimum line diameter: 5/16" (8 mm)...HK383€1,205.95 -
Harken System A Intermediate CB Battcar 3812 - 22mm
Harken
€256.95A Harken battcar system, along with full-length battens, helps raise, douse and reef with ease and acts as extra crew if you're sailing shorthanded. Battcar systems outperform in-mast or in-boom furling, cost less, and you don't need to recut your sail...HK3812€256.95 -
Harken System A CB Headboard Car Assembly 3811 - 22mm
Harken
€1,019.95A Harken battcar system, along with full-length battens, helps raise, douse and reef with ease and acts as extra crew if you're sailing shorthanded. Battcar systems outperform in-mast or in-boom furling, cost less, and you don't need to recut your sail...HK3811€1,019.95 -
Harken Micro Cam-Matic II Kit with Wire Fairlead 469
Harken
€67.95Wire fairleads maintain a low profile while holding the line close to the cleat. Kit Includes 468 Cam-Matic 475 wire fairlead Specifications Maximum working load: 200 lb (91 kg) Weight: 1.2 oz. (33 g)HK469€67.95 -
Harken Micro Carbo Cam-Cleat 471
Harken
€43.95Harken ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Lightweight fiber-reinforced carbo-cams for racing where weight is critical, or where adjustments are less frequent. Specifications Minimum line...HK471€43.95 -
Harken Micro Carbo Cam II Kit with X-Treme Angle Fairlead 474
Harken
€70.95The X-Treme Angle Fairlead allows releasing and recleating at angles up to 90 degree to the cleat. Kit Includes Fiber-reinforced 471 Carbo Cam 476 Extreme Angle fairlead Specifications Maximum working load: 150 lb (68 kg) Weight: 1.7 oz. (47 g)HK474€70.95 -
Harken Micro Wire Fairlead 475
Harken
€11.95Wire Fairleads maintain a low profile while holding the line close to the cleat. Specifications Fastener spacing: 1 1/16" (27 mm) Fits cam: 468, 471 Height: 15/16" (23 mm) Length: 1 7/8" (48 mm) Width: 15/16" (24 mm) Weight: 0.29 oz. (8 g) Technical...HK475€11.95 -
Harken Micro X-Treme Angled Fairlead 476
Harken
€26.95The X-Treme Angle Fairlead allows releasing and recleating at angles up to 90 degree to the cleat. This sets it apart from other fairleads where line uncleats at extreme angles and can’t recleat without centering the line. Specifications Fastener...HK476€26.95 -
Harken Carbo Fixed Double Block 381 - 29mm
Harken
€63.95Low-friction carbo air blocks are lightweight, strong, reliable and affordable. Companions to the popular Harken black magic block line, these small, compact blocks have very high working loads for safe, easy trimming. Features Single fixed: Integral...HK381€63.95 -
Harken System A Fixed Round Mast Groove Track Endstop Kit 3808 - 22mm
Harken
€77.95Endstops absorb shock loads and prevent damage to the car. Kits include endstops, Loctite, 2 slug mounts. Loctite is a trademark of Hankel AG and Company KGaA. Specifications Mounting slugs per kit: 2 Fasteners: M5 mm Weight: 0.5 oz. (14 g) Note:...HK3808€77.95 -
Harken System A Slug-Mount Track 3807 - 22mm
Harken
€175.95Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. 3807 track mounts to mast using a unique slug system that allows mast-up installation. Specifications Fastening method: Mounting slugs Fastener...HK3807€175.95