RS Bahia / Laser Bahia

RS Laser Bahia mainsail in dacron supplied with battens and sail bag - Orginal Laser Performance version Specification The Laser Bahia mainsail size is 9.50 m2 This is the smaller reefable mainsail Supplied including a long sail bag Material Dacron

Bahia Rudder Head Assembly with tiller Part No BAH-FO-300 Also suits Laser Bahia 85331 Note : Tiller Extension not included

The RS Bahia, formerly the Laser Bahia, is a most versatile sailboat embraced by families, sailing centres and clubs around the world. Perfect for 2-5 Adults, the Bahia can be cruised with Jib and Main or raced, as a high performance dinghy, withthe...

Laser Bahia / Vago mast jib sheave box with nylon pulley  90623 - (Selden 505-071-01 )

Bahia rudder blade in GRP - Suits RS Ocean Play Bahias and also recent Laser Perfromance Bahia models

Plastic mounting plate to attach drainage flaps on RS Pico and Bahia Sail Boats - Formely Laser Pico and Bahia

Long rudder pin to attach rudder head to gudgeons.

Laser Bahia and Vago mainsheet block assembly. Does not include standup pulley (See Code: LS-91333).

Mesh gennaker sock in grey to cover and protect the gennaker on your Laser Bahia.

The RS Bahia Gennaker standard sail is 12.78 m² with red panels, made from rip stop nylon and including sail bag. Specifications Colour: Red Size: 12.78 m²

The Bahia Main Sail size is 10 m² and is supplied rolled with grey panels and reefing points made from Dacron, including long sail bag. Specifications Material: Dacron Colour: Grey Size: 10 m²

The RS Bahia Jib size is 3.75 m² and comes supplied rolled with white panels made from Dacron including long sail bag. Formerly the Laser Bahia this model is now produced by RS Ocean Play, part of RS Boats Gauranteedd Genuine Spares

Laser Bahia lower shroud wire and rope to suit the Laser Bahia Masts. Comes supplied with crimped eye to connect to deck (shackle not included).

Replacement Jib Halyard for the RS Laser Bahia sailing dinghy with wire halyard and rope tail. Genuine Bahia Spares

Laser Bahia forestay wire to connect to mast. Specifications Material: Stainless steel

The replacement eyelet for the deck of the Laser Bahia or the bow of the Dart 16 screw in Bow eye.

This infused GRP centerboard is a multi-boat centerboard, compatible with both the RS Bahia and Vago ( Formerly the Laser Bahia and Laser Vago)

Replacement Inspection Port for the Laser Bahia and Laser Bug. Specifications Diameter: 4"

Metal gudgeon plates to suit the Laser Bahia and Vago sailing dinghies. Use the same part for the top and bottom gudgeons. Holds the rudder pintle on the transom.

Laser Vago and Bahia pivot bolt set to suit rudder.

The trapeze kit for the Laser Bahia with two handles, two cleats and two trapeze lines made from stainless steel wire. Optional trapeze pack for racing.

Toe strap set in grey includes two long and two short. Specifications Colour: Grey Number of strap: 4

The Bahia Oars comes as a set of two oars that separate into three sections. With a simple push of a lock the Bahia oars come apart to help with packing.     L = 115cm H = 23 cm W = 23cm

The storage box for the Bahia can also be used as a seat. Due to the size of the box you can fit all the things you need for a days sailing while not taking to much space up within the cockpit. It is easily installed on all Laser Bahias...

The Bahia engine bracket will take a 2 hp or 3 hp engine. Please note that the Engine will no longer fit in the Storage Box due to size.

The Vago/Bahia Boom inboard end to attach to gooseneck on mast of any Laser Bahia or Vago sailing dinghy, requires 3/16" x 5/8" stainless steel rivets. Specifications Rivet material: Stainless steel Number of rivet: 4

An elegant design in aluminium with a silver or hard anodised finish. The rope drops down into the teeth. Specifications Material: Aluminium Colour: Silver Rope size: 3 mm - 6 mm Require bolt: 2 x 4 mm Dimension: 48 mm x 15 mm x 36 mm

Eyeplate to suit Laser 1 and Laser Bahia masts. Comes with 3 x rivets included for attachment.

Roto moulded mast head float in ice blue complete with all fittings and instructions to install float on mast head.

Replacement top mast pulley cap for the Laser Bahia and Laser Vago sailing craft.

Laser Bahia Shroud wire is supplied as a single wire for the Bahia Mast.

The Laser Gnav Strut suits the Laser Bahia and Vago sailboats and are constructed from aluminium tube with end fittings. It connects the mast hinge fitting to the boom slider below using two clevis pins (sold separately).

Gnav slider runs on top of boom connects to gnav strut and carry's out the same function as a kicker or vang ( Selden 511-805-01)

The Laser Gnav Mast Fitting connects the hinges on the strut to the mast with the drop nose pin included.

Plastic replacement Bhaia mast heel. This part is also known as the 'Laser Bahia Mast Foot' not to be confused with the Laser Bahia Mast Step.

The Laser Bahia Mast Step holds the mast when it is positioned upright. Bahia mast step aluminium construction riveted to cross beam used to pin mast foot to cross beam.

RS Bahia Gennaker Pole (Formerly Laser Bahia) -Genuine Bahia Parts

Fully rigged Bahia mas,t complete with all fittings, halyards, standing rigging wires and spreaders.   Please note Shipping Restriction map apply to this product due to length 

The replacement sheave to suit the mast head on all Laser and Bahia sailing boats. The Laser Sheave is made from nylon plastic and fits onto the top of the mast with a clevis pin 3/16" x 1" (sold separately). Specifications Material: Nylon plastic