RS Bahia / Laser Bahia

RS Laser Bahia mainsail in dacron supplied with battens and sail bag - Orginal Laser Performance version Specification The Laser Bahia mainsail size is 9.50 m2 This is the smaller reefable mainsail Supplied including a long sail bag Material Dacron

Bahia Rudder Head Assembly with tiller Part No BAH-FO-300 Also suits Laser Bahia 85331 Note : Tiller Extension not included

The RS Bahia Gennaker standard sail is 12.78 m² with red panels, made from rip stop nylon and including sail bag. Specifications Colour: Red Size: 12.78 m²

Bahia rudder blade in GRP - Suits RS Ocean Play Bahias and also recent Laser Performance Bahia models

Plastic mounting plate to attach drainage flaps on RS Pico and Bahia Sail Boats - Formely Laser Pico and Bahia

Mesh gennaker sock in grey to cover and protect the gennaker on your Laser Bahia.

Replacement Jib Halyard for the RS Laser Bahia sailing dinghy with wire halyard and rope tail. Genuine Bahia Spares

This infused GRP centerboard is a multi-boat centerboard, compatible with both the RS Bahia and Vago ( Formerly the Laser Bahia and Laser Vago)

Laser Vago and Bahia pivot bolt set to suit rudder.

The trapeze kit for the Laser Bahia with two handles, two cleats and two trapeze lines made from stainless steel wire. Optional trapeze pack for racing.

The Laser Gnav Strut suits the Laser Bahia and Vago sailboats and are constructed from aluminium tube with end fittings. It connects the mast hinge fitting to the boom slider below using two clevis pins (sold separately).

Gnav slider runs on top of boom connects to gnav strut and carry's out the same function as a kicker or vang ( Selden 511-805-01)

The Laser Bahia Mast Step holds the mast when it is positioned upright. Bahia mast step aluminium construction riveted to cross beam used to pin mast foot to cross beam.

RS Bahia Gennaker Pole (Formerly Laser Bahia) -Genuine Bahia Parts

Auto Ratchet block 45 mm for the Laser Vago and Bahia sailboats.Ratchet blocks can come in manual or automatic versions. The manual requires a switch to turn the ratchet on and off. The auto ratchet blocks let the line run freely until its put under...