RS Bahia / Laser Bahia

Laser Bahia Storage Lid to suit the storage box onboard your dinghy, which doubles up as a seat for rowing. Specifications Colour: Red

The storage box for the Bahia can also be used as a seat. Due to the size of the box you can fit all the things you need for a days sailing while not taking to much space up within the cockpit. It is easily installed on all Laser Bahias...

The Bahia engine bracket will take a 2 hp or 3 hp engine. Please note that the Engine will no longer fit in the Storage Box due to size.

The Vago/Bahia Boom inboard end to attach to gooseneck on mast of any Laser Bahia or Vago sailing dinghy, requires 3/16" x 5/8" stainless steel rivets. Specifications Rivet material: Stainless steel Number of rivet: 4

An elegant design in aluminium with a silver or hard anodised finish. The rope drops down into the teeth. Specifications Material: Aluminium Colour: Silver Rope size: 3 mm - 6 mm Require bolt: 2 x 4 mm Dimension: 48 mm x 15 mm x 36 mm

Eyeplate to suit Laser 1 and Laser Bahia masts. Comes with 3 x rivets included for attachment.

Roto moulded mast head float in ice blue complete with all fittings and instructions to install float on mast head.

Replacement top mast pulley cap for the Laser Bahia and Laser Vago sailing craft.

Laser Bahia Shroud wire is supplied as a single wire for the Bahia Mast.

The Laser Gnav Strut suits the Laser Bahia and Vago sailboats and are constructed from aluminium tube with end fittings. It connects the mast hinge fitting to the boom slider below using two clevis pins (sold separately).

Gnav slider runs on top of boom connects to gnav strut and carry's out the same function as a kicker or vang ( Selden 511-805-01)

The Laser Gnav Mast Fitting connects the hinges on the strut to the mast with the drop nose pin included.