1. shop checkoutCheckout
  2. shopping cart
    View Cart
  • GENERAL SALES HOTLINES
  • IRL 021 4315700   +353 21 4315700
  • UK 02382 123270   +44 2382 123270
  • TOP BRANDS
  • BEST PRICES
  • TECHNICAL ADVICE
  • FREE DELIVERY TO IRL & NI FOR ORDERS OVER 50

Fender Step - Single Step

Fender Step - Single Step

Ref: DF1513

FenderStep is the original step-on boarding fender and will prove invaluable for alighting or stepping onboard from a vessel.

The Fenderstep is now joined by a Fender2Step a two step version of the same concept.

Order Fender2Step inder part no DF1522.




- FenderStep are made from very strong marine grade PVC integrally moulded to our solid rope holds
- FenderStep use high grade metal valves with protective dirt/salt screw caps integrated within the rope holds
- Every FenderStep is immersion tested prior to despatch, to ensure that each one is leak free and air-tight
- Inflatable Design
- Easily Setup
- Patented Design

- Inflation pressure: 2 psi / 0.15 bar at 20ºC / 68ºF
- Max load: 100 kg / 225 lbsEye diameter: 18mm
- Standard Colours: White & Blue & Navy Blue Optional Colours: Black & Grey
- FenderStep Height: 400 mm Width: 400 mm Depth: 205 mm Weight: 2.0 kg
- Fender2step Height: 560 mm Width: 450 mm Depth: 180 mm Weight: 2.5 kg




Attach the FenderStep to your boat and use only as follows:

Separately tie two minimum diameter 10mm (3/8") ropes using a carefully formed bowline knot to each rope hold.

Securely tie the other end of each rope to suitable strongpoints on the boat, never use only a single point.

Ensure the step is level and that all the knots are fully secure prior to every use.

Do not use the FenderStep for any loads exceeding a total 100kgs or 225lbs.

Inflation

1. If your FenderStep has been supplied deflated the simplest way to correctly inflate it is to use an ordinary compressor fitted with an accessory air pistol and then:
2. Remove the plastic screw.
3. Press the air pistol against the metal valve.
4. Do not overinflate the FenderStep, it should remain easy to make a small 'dent' when pressed with a thumb
5. Replace the protective plastic screw.

If you would like your step fender inflated for you please request so in the shipping note section of the checkout process.
Alternatively you may carefully inflate with a handpump fitted with a fine nozzle, but take care not to damage the valve insert.

FenderStep
Boat Step Fender
Boarding Fender
Single Step Inflatable


Price:54.99 / STG 49.49

(Including VAT)