Barton

Perfect for use with conventional or fully battened mainsails. These complete kits are a fantastic value. They contain stainless steel plastic-coated wires with blocks and fixing eyes attached...

Barton Towable Car End with a functional bracket placed on top. Barton Genoa Cars and specialist sliders designed to run on 25mm (1") T track. Specifications Barton Car No: 25221  Type: Track...

These 5mm Barton Screws feature a die-cast plastic Knob that affords and easy way of tightening or loosening.

This Barton T-Track is 1 meter in length and is drilled for fastenings and plunger stops. Drilled for fastenings and plunger stops. 'Spectro' grey anodised and supplied in 1m metric lengths...

Barton Track Ends are rubber caps for a drilled track. Suitable for all sizes 1 J-Track and T-Track in 20mm.Sold in pairs.

Barton Sliding Loop for 32mm 'T' track features a heavy duty stainless steel attachment loop and through-bolted and riveted for extra strength.

The Barton 60462 High Load Low Friction Eye/Ring comes with a Dyneema strop and an eye with a 28mm bore. The Barton High Load Low Friction Eye/Ring with loop is available in 3 sizes in total and can...

The Barton 60461 High Load Low Friction Eye/Ring comes with a Dyneema strop and an eye with a 22mm bore. The Barton High Load Low Friction Eye/Ring with loop is available in 3 sizes in total and can...

The Barton 60460 High Load Low Friction Eye/Ring comes with a dyneema strop and an eye with a 12mm bore. The Barton High Load Low Friction Eye/Ring with loop is available in 3 sizes in total and can...

Barton High load fixing strop or 'Tweeker' is designed to be spliced into 16mm rope. Ergonomically designed to maximize the strength and efficiency of the eye. With HV500 hard anodising and the...

Barton low-friction eyes are manufactured in marine-grade aluminium and finished in a unique hard ‘Spectro’ grey anodising. These lightweight high-load rings are suitable for a variety of...

Stainless steel Mast Step These low-profile, lightweight hinged mast steps are manufactured in bright, polished stainless steel Each step has a secure and positive hinged action and is...

This product has won many top design awards and is truly innovative.Keep one onboard for an emergency - It will repair all manner of tears and leaks in Inflatable Boats, RIB, or any Inflatable item...

The Barton Size 2 Deck Organiser (4 Sheave) is designed for use when leading control lines and halyards across the coach roof and back to the cockpit.This range features aluminium construction with...

The Barton Size 2 Deck Organiser with 3 Sheaves suits up 14mm lines and is designed for use when leading control lines and halyards across the coach roof and back to the cockpit.  This range...

The Barton Size 1 Deck Organiser (4 Sheave) is designed for use when leading control lines and halyards across the coach roof and back to the cockpit.This range features aluminium construction with...

The Barton Size 1 Deck Organiser (3 Sheave) is designed for use when leading control lines and halyards across the coach roof and back to the cockpit.This range features aluminium construction with...

The Barton 2 Sheave, Size 1 Deck Organiser features 32mm Sheaves and is designed for use when leading control lines and halyards across the coach roof and back to the cockpit.This range features...

Pillar fairleads enable the cam cleat to be engaged from a variety of angles. Cams can be fitted either way around to achieve a lead from in front or behind. Stainless steel pillars add strength and...

Cleat designed to hold dinghy ropes of 5-10mm.Of the same design as the Barton 'K' Cam range, this budget range features cam cleats moulded from light grey glass-reinforced nylon...

Cleat designed to hold dinghy ropes of 6-12mm.Of the same design as the Barton 'K' Cam range, this budget range features cam cleats moulded from light grey glass-reinforced nylon.If you add Barton...

Cleat designed to hold dinghy ropes of 10-14mm.Of the same design as the Barton 'K' Cam range, this budget range features cam cleats moulded from light grey glass-reinforced nylon...

The Barton Maxi  KCamcleat suits ropes from 10mm to 14mm Manufactured from a composite Kevlar/Zytal material to accept lines 10-14mm. This advanced material offers performance advantages...

The Barton Mini Camcleat suits ropes from 8mm to 10mm. Made from high-strength materials. Manufactured from a composite Kevlar/Zytal material to accept lines up to 10mm. This advanced material offers...

The Barton Stand Up Blocks are high load cruiser bocks with a rugged construction, featuring high quality injection moulded side plates with all load-carrying components from 316 grade stainless...

This Foot Block is manufactured from Bartons marine grade aluminium and 'Spectro' grey anodised for extremely high UV stability and longevity. Features Hollow stainless steel rivets allow for...

The Barton Midi Camcleat suits ropes from 6mm to 12mm. Made from high-strength materials for use on sailing dinghies such as the Topaz. Manufactured from a composite Kevlar/Zytal material to accept...

Aluminium tiller extension in Spectro grey anodised material suitable for the Topper Topaz Sailing Dinghy, including models: Uno, Race and RaceX.Suitable as a Topper/Topaz Tiller Extension when using...

Popular Barton screw-in dinghy bung & hull fitting with retaining legs to fit most sailing dinghies. Suitable for Topper Topaz sailing boats made pre-2006. Features Screw-Type Design: Provides a...

Manufactured from high-grade plastics and aluminium with 'Spectro' grey annodised finish. Lines can be drawn through the clutch in the locked position as the line moves freely in the direction of...

Manufactured from high-grade plastics and aluminium with 'Spectro' grey annodised finish. Lines can be drawn through the clutch in the locked position as the line moves freely in the direction of...

The Barton Single Rope Clutch D0550 is an all-new design for cruising and racing yachts, manufactured from modern lightweight materials to withstand the harsh marine environment. Moulded parts are...

The Barton Double Rope Clutch D0550 is an all-new design for cruising and racing yachts, manufactured from modern lightweight materials to withstand the harsh marine environment. Moulded parts are...

The Barton Triple Rope Clutch D0550 is an all-new design for cruising and racing yachts, manufactured from modern lightweight materials to withstand the harsh marine environment. Moulded parts are...

The Barton Triple Rope Clutch 80502 is manufactured from high-grade plastics and aluminium with a 'Spectro' grey annodised finish. Lines can be drawn through the clutch in the locked position as the...

Barton Single Block is suitable for the 2 x Topper Downhauls Blocks attached onto the carbine hook at the bottom of your downhaul. Topper or Topaz Downhaul Block with 20mm sheave for use as a micro...

The Barton Size 0 Single Becket Block is designed for small to mid-range vessels and comes with nylon sheaves suitable for all ropes, including braided dyneema. Barton is known as a great value for...

Barton Single Block - Swivel Single Dinghy Block for 5mm Rope with Swivel Base. This shackle suits the Gennaker for a Topaz Tres and Topaz Race X at the front of the boat. The 20mm sheave Size 0...

The Barton Size 0 Single Swivel/Becket Block is designed for small to mid-range vessels and comes with nylon sheaves suitable for all ropes, including braided dyneema. Barton is known as a great...

A strong, lightweight range of blocks suitable for use on dinghies, dayboats, or as lead blocks on larger craft. The 20mm sheave Size 0 block range is available in plain and ball bearing assembly...