BOAT CONTROL

Sowester 35cm diameter polyurethane Steering Wheel in black with standard taper, suitable for runabouts and smaller power boats up to 60hp. Features Taper Standard  Textured Grip Black off plate UV protected and suitable for exposed...

The Nautic Cutter Wheel T1 - a traditional ,very solid and strong steering wheel. Features Manufactured from marine mahogany wood with a brass hub and rings Varnished with the best gloss transparent polyurethane varnish Taper Standard Morse/ Teleflex-...

Stainless steel classic sport wheel with oval shaped grip and mahogany centre. Features Taper Morse/Teleflex Standard Taper Material Stainless Steel Specification Diameter: 33/35/37/40/45 cm  

High quality steering wheel with 6 spokes, polyurethane grip. Features Suitable for exposed positions Centre fits all Standard Morse/Teleflex Specifications Diameter: 33/36/40cm Colour: Black/Stainless Steel  

The Lewmar CHSX open deck switch with a stainless steel lid is suitable for DC electric windlasses running on 12 or 24V. Features IP67/5 rated for water resistance Twin sealed switch compartment New lower-profile design with updated styling Please note...

The Nautic Pilot Wheel T2 - a traditional, solid and strong steering wheel. Features Built in marine mahogany wood with a brass hub Varnished with the best gloss transparent polyurethane varnish  Taper Standard Morse/ Teleflex - fit all Morse,...

Sportsboat steering wheel with polyurethane grip. Features Suitable for exposed positions Taper Morse/ Teleflex standard taper Construction Stainless steel with moulded polyethylene soft grip trim Specifications Diameter: 32/35cm Draw I: 32cm Draw G:...

This Lazy Spoke greatly assists close quarters manoeuvres and helps get wheel from hard over to hard over in quickest time. Beautifully crafted in Teak, this spoke has a flat mounting plate which should suit a variety of wheels.

Adaptor for hole from 1″ to 3/4 taper.

Lewmar 89400146 fitting kit for Lewmar Engine Control  89400109 & 894100196 Specifications Brand: Lewmar Product Type: Engine Control kit

Lewmar Pedestal Engine Control kit with Pod offers engine and gear controls to complement the steering pedestal of your choice. The engine control designed exclusively for Lewmar is non-magnetic and can be guardrail or pedestal mounted without...

Folding Lazy Spoke Handle to suit ship's wheels with 12mm spokes.

Lewmar 185TT Drive/Shear Pins

Power boat wheel handle with a Rolex-style lid which can be fitted onto the wheel for further precision and more tactile mooring. They can be either bolted or clamped onto the wheel with two clamping points by an allen wrench, included in the Power Grip...

The Lewmar V700 Vertical Windlass With Dual Chain Gypsy Kit is one of the most attractive and durable windlasses on the market. It works at the push of a button and has two built-in features that make it unique; motor protection and anchor lock. Plus...

Steering wheel in stainless steel with handgrip in mahogany wood. A high quality, modern wheel with a beautiful look. Not suitable for exposed positions. Specifications Size: Ø 350 Taper: Morse/ Teleflex Standard Taper

Lewmar Whitlock engine and gear control mechanism only to complement Lewmar Pedestal Steering Console . The engine control designed exclusively for Lewmar is non-magnetic and can be guardrail or pedestal mounted without interfering with the compass. Note...

Lewmar has created a beautiful new range of chain stoppers made from cast 316 stainles steel, perfect for taking the load off your windlass allowing you to relax knowing you chain and anchor is secure. Windlasses are not designed to hold high loads...

The Lewmar 89400109 replacement, pedestal engine and throttle engine control mechanism kit to suit Lewmar Pedetal Steering  The engine control designed exclusively for Lewmar is non-magnetic and can be guardrail or pedestal mounted without...

The Lewmar Pro-series 1000 8mm Windlass Kit is praised by professionals worldwide. The horizontal Pro-Series is a shining example of Lewmar's commitment to provide quality products for boats from 6m-11.5m (20-38ft). It's DIY-ready, easy to install and...

Lewmar Basic Joystic Panel to be used with Lewmar TT thruster 2.2kW and above fitted with a black box. Features Ideal entry level control of thrusters Suits Lewmar Thrusters 110TT and 140TT Features On/Off illumination Easy installation connection

High quality steering wheel with 6 spokes, polyurethane grip. Features Suitable for exposed positions Centre fits all Standard Morse/Teleflex/Ultraflex Specifications Diameter: 33/36/40cm Colour: White/Stainless Steel

Sports boat steering wheel in sky white with black spokes Ø 35cm. Specifications Size: 35cm Taper: Morse/ Teleflex standard taper Construction: Black coated anodized alloy with polyurethane soft grip

The Lewmar 12V Dual Sealed Contactor is a relay or solenoid for the Lewmar V5 Windlasses. Features Suits the Lewmar V5 Windlass 12 volt power supply Sealed unit to protect against water damage Lewmar part no 68000318

The Lewmar GRP Bow Thruster Tubes 185mm x 1000mm are used in tech installation of Lewmar 185TT Bow Thrusters. Features High-quality filament-wound GRP tunnels Official accessory part for the Lewmar Bow Thrusters Specifications Length: 1000mm Wall...

Lewmar 185-TT Electric, Tunnel Bow Thruster with Pad Controller - Version Gen 2, 24V x 3.0KW supplied as a full kit - Suitable for vessels between 32ft - 45ft. Features No reservoir to install, no leaks and no maintenance High performance 5 blade...

The Lewmar 48ST Ocean 12V Anchor Windlass Conversion Kit upgrades your manual winch to an electric model with the Ocean upgrade kit. The kit contains all you need to convert your existing manual winch to an electric powered version. Contents 40-50 12V...

Lewmar offers engine and gear controls to complement the steering pedestal of your choice. The engine control designed exclusively for Lewmar is non-magnetic and can be guardrail or pedestal mounted without interfering with the compass. The pod for the...

Lewmar Bow Thruster Control Solenoid DC88-454L - 12V

This Lewmar CHSX Switch made from a composite plastic body and stainless steel lid is suitable for DC electric windlasses running on 12 or 24V. Features IP67/5 rated for water resistance Twin sealed switch compartment New lower-profile design with...

Lewmar CHSX Deck Switch Black Closed Features Suitable for DC electric windlasses running on 12 or 24V IP67/5 rated for water resistance Twin sealed switch compartment Composite plastic body Available with polished stainless steel or composite...

The Lewmar Dual Joystick Thruster Controls are designed for all Lewmar TT, RT, SRT & VRT thrusters fitted with a blue box and can be fitted to thrusters fitted with a black-box using a controller adapter.  The controllers are installed without...

The Lewmar Enguard Helm Control Housing is a direct replacement for the housing on your Lewmar Steering Helm (Lever control not included). This part is the housing replacement for the control lever only as pictured below:  

The Lewmar 85006680 is fast-action, simple twist handgrip release for Lewmar Folding Steering Wheel. Feature Sold singularly - Two required per install 

The Lewmar Integra drive, Mamba version, mounts directly inside the Integra pedestal. This unique installation is only available from Lewmar and provides the installer with a simple and quick installation with no complicated, labour intensive mounting...

This kit is offered as a 'water-proof' solution only, as the installation is the customer's responsibility. Specifications Brand: Lewmar Product Type: Cover Kit Waterproof: Yes

The Lewmar Pro-series 1000 6-7mm (1/4") Windlass Kit is praised by professionals worldwide. The horizontal Pro-Series is a shining example of Lewmar's commitment to provide quality products for boats from 6m-11.5m (20-38ft). It's DIY-ready, easy to...

Praised by professionals worldwide, the horizontal Pro-Series is a shining example of Lewmar's commitment to provide quality products for boats from 6m-11.5m (20-38ft). It's DIY-ready, easy to install and housed in 100% 316 stainless steel, making it...

The Lewmar Pro-Sport Anchor Windlass 550G is designed as an economical package for rope and chain applications, without compromise to quality or performance. Pro-Sport is designed around a highly efficient spur gearbox, using smaller, more powerful...

The Lewmar Helm Shaft Seal is an offical replacement for the Lewmar Cobra Input Helms.