BOAT CONTROL

Seastar SSC62 Series Heavy Duty Steering Cable with universal QC-II quick-connect. Available in lengths lengths 9ft - 32ft. Features Heavy Duty Rotary Drive Cable Fits Helm Drives as listed below and some other manufacturers. Seastar recognised...

Seastar Light Duty Steering Helm drive - Use in conjunction with Seastar/Teleflex SSC131 Cables and other makes listed below. Features Outboards up to 55hp Comes with 90 Bezel Kit 2.6 turns lock to lock Compact size Minimum intrusion behind...

Seastar Light Duty Steering Cable - Length  - Use in Conjunction with Seastar Helm TXSH8050 Features Use with Seastar TXSH8050 Helm Outboards up to 55hp Through tube connection Retro fits these Helms Ultraflex T67 Morse®C230/C231 Compac -...

Easy to install, switch operated by pressing your foot on the button switch: the basement is in stainless steel, whilst the cover is designed to avoid accidental operation and made in shock-resistant plastic.This foot switch is for operating with the...

The Teleflex CC343 flexible push-pull stop control cable with integral handle is suitable many remote operations such as engine shut down, fuel shut off, lever valve operation and remote choke. Features Supplied with choice of Tee or Knob Pull...

Lofrans' Foot Control Switch Up - black. Easy to install, switch operated by pressing your foot on the button switch: the basement is in stainless steel, whilst the cover is designed to avoid accidental operation and made in shock-resistant plastic...

Seastar Safe-T® Quick Connect Helm Drive Unit SH5094 suitable for Inboard, Outboard, and Sterndrive Powered Vessels. Use with Heavy Duty Cable TXSSC62 The helm assembly can be mounted for either port or starboard cable routing. Steering cables, if...

Seastar 90° Bezel Kit to suit Safe-T® Quick Connect HELM - SH5094 For a complete Safe-T® Quick Connect system the following additional components are required Seastar Safe-T® Quick Connect HELM - TXSH5094 Bezel Kit TXSB27484P(90°) or...

Angle mounting bracket to suit Seastar DC Stop Control Model 301916 - Gives multiple mounting options and simplifies the install - Manufactured in marine grade stainless steel. Specification Material: Stainless Steel

This Stop Collar Kit is for anchoring the ends of Teleflex CC343 Stop Control Cables assemblies. Includes Clamp  Cable end pivot fitting with lock screw

Lofrans Windlass Control Box with 3 Terminal connections - Suitable for Lofrans' windlass motors 500W-1700W in 24 volt. Features 24 Volt  Suits motor 500 watts to 1700W Resistant to shocks and marine corrosion

Lofrans 8mm Gypsy - Tigres, Kobra, Cayman- Spare gypsy. Compatible 8mm- Chain: ISO 4565 or DIN 766

Lofrans Anchor Windlass Operating Switch with three positions (off, up and down). Features Toggle switch style Waterproof Switch Positions: Off, Up & Down Fasters  4 x 4mm screws (sold separately) Dimension 85 x 50mm

Lofrans Wing Nut. Suits Lofrans Windlass Models Tigres Royal Kobra Cayman

This Lofrans rocker style anchor windlass operator switch has a modern and practical design. It is reliable and watertight and it is supplied with the opposite case to make simple and ensure the installation.  Features 2 Position Hold down toggle...

Lofrans Maintenance Kit for Project X2 Windlass -Keep your Lofrans windlass in good shape! The spare-part and maintenance kit for your Lofrans windlass contains all the necessary wear parts such as screws, seals, cotter pins, etc. Contents 4 x 226 4...

Seastar adaptor kit to convert Big T Helm Drive Units to Safe T Quick Connect SSC6v Cables. This unit will convert any make Helm with Big T style connection.  Features Installation Instructions Screw adaptor over  Big T Connection

Seastar NFB 4.2 Heavy Duty Rotary Helm Drive - SH4910P - For use with TXSSC62 Cables. Patented No Feed Back Steering Control for about the cost of an old-fashioned steering replacement. With the advantage of 4.2 turns lock-to-lock and Seastar's patented...

This Seastar Helm Tilt Mechanism, when used conjunction with a matching Tilt Helms from Seastar’s NFB, Rack, Safe-T II and HPS Helm range, will allow the helm position to be adjusted in five 12° increments, with a total movement range of...

Lofrans Windlass Circuit Breakers for Lofrans winches. Image shows Lofrans 70A and 35A. This thermal E-T-A circuit breaker is supplied with a panel for mounting and a LED light. This unit protects the electric motor of the windlass. Features Protects...

Keep your Lofrans windlass in good shape! The spare-part and maintenance kit for your Lofrans windlass contains all the necessary wear parts such as screws, seals, cotter pins, etc.

Dometic Seastar  Bezel Kit 20 Degree Safe-T Bezel Kit - This kit includes a black 20 degree bezel, mounting hardware, and brackets. Suitable for Safe-T QC/HPS and NFB Rotary helms. Dometic part no: 9130005808    

Seastar Big T Rotary Helm Drive SH5000P  - Larger boat cable steering system for inboards and power-assisted sterndrives, up to 34' Big-T® Rotary Steering The Original SeaStar Solutions Steering System! For over 35 years, Big-T® has been the...

Dometic / Seastar CHX8352P Xtreme Center Console Control, Chrome with Engine Cut Off Switch, Trim Switch, Tilt Switch. The ergonomics and features of the Xtreme control range are advanced beyond those of any other control on the market. A shapely,...

SeaStar Teleflex QC Steering Cable to D290 Helm. This SeaStar Teleflex SA88304 adapter allows the connection of new style Quick Connect cables to the older model, Morse D290 Steering Helms.  

Lofrans Control Box for 24V Windlassses with 500 -1700W Motors. Specifications Voltage: 24V Wattage Range: 500W-1700W Connections: 4 Terminals

Seastar 90°  & 20° Bezel Kit -SB27265P - Suits Big T Helm SH5000P Complete system requires these components 1 x Seastar Big T Rotary Helm Drive SH5000P  1 x Bezel 2-pc. Black (90°/20° mount) SB27265P 1 x SSC61XX...

Seastar NFB 4.2 SH4920P dual cable rotary helm drive helm, for twin cable steering systems, giving outstanding, precision and responsive control - Use in conjunction with 2 Seastar SSC62 Cables Seastar’s NFB Steering provides 4.2 turns lock-to-lock...

Lofrans 630995 - Replacement chain gypsy in 10mm. DIN766 to suit Lofrans Windlass X2 & Project 1000 Feature Suits 10mm DIN 766 Calibrated Chain 

Lofrans Bearing Ring Im1520164 #348 Feature Suits the Lofrans Tigres, Titan and Falkon windlasses

Official replacement part for the Lofrans Falkon Windlass, the Clutch Nut Falkon Chrome part no: 435 is chrome finish.

Lofrans Cone Clutch Tigres 318B 10mm.    

Lofrans 12mm Gypsy in DIN766 stainless steel. To suit the Lofrans windlass winch model: Tigres.

Lofrans Falkon Bush Nylon 437C also under 437A.

Lofrans Falkon Cone Clutch #436 Features Made from stainless steel Supports the gear on your windlass

Lofrans Falkon Windlass Chain Pipe 469 is a thru deck fitting that guides the chain onto the gypsy. Feature Ensures the smooth movement of the chain from and to the chain locker

Lofrans Falkon Windlass Drum Bottom Section 840 comes in two parts (upper section sold seperately). Specification Material: Chrome plated bronze

Replacement part to fit the Lofrans Falkon Windlass Drum Upper Part. Feature Material Chrome plated bronze Parts Diagram Falkon Windlass Drum fits part no: 839A as per below:

Lofrans Falkon Windlass Stripper 467

The Lofrans Falkon Windlass Washer #434 fits the bolt that secures the cap that fits onto the chain gypsy. Feature Suits the Falcon Windlass Parts Diagram The Lofrans Falkon Windlass Washer is shown under part no: 434 below: