Features Meets american boat and yacht council (ABYC) standards The industry standard circuit breaker for Blue Sea Systems" electrical panels Combines switching and circuit protection into a single device "Trip Free" design cannot be held "ON" during...

Switches isolated battery banks to all loads or combines battery banks to all loads Accepts two 4/0 AWG (95 mm²) battery cables Includes AFD (alternator field disconnect) Case design allows surface or rear panel mounting Ignition protected-safe for...

Switches isolated battery banks to all loads or combines battery banks to all loads Accepts two 4/0 AWG (95 mm²) battery cables Case design allows surface or rear panel mounting Ignition protected-safe for installation aboard gasoline powered...

Switches a single battery to a single load group Accepts two 4/0 AWG (95 mm²) battery cables Includes AFD (alternator field disconnect) Case design allows surface or rear panel mounting Ignition protected-safe for installation aboard gasoline...

Switches a single battery to a single load group Accepts two 4/0 AWG (95 mm²) battery cables Case design allows surface or rear panel mounting Ignition protected-safe for installation aboard gasoline powered boats Specifications Switch type:...

Simultaneously switches two isolated battery banks or combines battery banks to all loads Ignition protected-safe for installation aboard gasoline powered boats Case design allows surface or rear panel mounting Make-before-break contact design allows...

Simultaneously switches two isolated battery banks Ignition protected-safe for installation aboard gasoline powered boats Case design allows surface or rear panel mounting Specifications Stud material: Tinned copper Switch type: Dual circuit Colour:...

Switches isolated battery banks to all loads or combines battery banks to all loads Case design allows surface or rear panel mounting Ignition protected-safe for installation aboard gasoline powered boats Make-before-break contact design allows...

Switches isolated battery banks to all loads or combines battery banks to all loads Case design allows surface or rear panel mounting Ignition protected-safe for installation aboard gasoline powered boats Includes AFD (Alternator Field...

Switches a single battery to a single load group Ignition protected-safe for installation aboard gasoline powered boats Case design allows surface or rear panel mounting Specifications Stud material: Tinned copper Switch type: Single circuit...

Simultaneously switches two isolated battery banks or combines battery banks to all loads. Make before break contact design allows switching between battery banks without power interruption. Specifications Stud material: Tinned copper Switch type:...

Switches a single battery to a single load group Isolating cover with snap-on sections protects rear contacts Case design allows surface, front panel, or rear panel mounting Ignition protected-safe for installation aboard gasoline powered...

A complete small boat battery management system. Charge two batteries at or away from the dock.This Add a battery kit is similar to the Blue Sea 7649 (see related products) however this unit comes with 10 Amp BatteryLink Charger Model 7604. The...

The Add-A-Battery is as simple to operate as an ON-OFF switch, yet effectively manages the switching and charging of two batteries from a single charge source. The Add-A-Battery includes a Dual Circuit Plus Battery Switch and an Automatic Charging Relay...

The Add-A-Battery is as simple to operate as an ON-OFF switch, yet effectively manages the switching and charging of two batteries from a single charge source. The Add-A-Battery includes a Dual Circuit Plus Battery Switch and an Automatic Charging Relay...

This Trem Power Centre Battery Box 'all-in-one' battery power box is a unique 12 volt power station that quickly, easily and safely stores and distributes power from a 12 volt marine battery directly to your appliances. it comes with a battery level...

Features Provides electrical insulation for exposed panel backs Provides mechanical protection for panel backs protruding into lockers Lightweight material is easily drilled for wire entrance and exit Meets ABYC requirements for panels with combined AC...

Blue Sea AC Rotary Switch Panel 65 A 2 positions + Off and 2 Pole as under 8357. Fully wired and ready for installation. Blue Sea 230 V AC Source Selector Switch Panel with rotary switch x 2. If either the Blue Sea Switch front or back is to be exposed...

Blue Sea AC Rotary Switch Panel 30 A 2 positions + Off and 2 Pole as under 8359. Fully wired and ready for installation. Blue Sea 230 V AC Source Selector Switch Panel with rotary switch x 2. If either the Blue Sea Switch front or back is to be exposed...

Blue Sea AC Rotary Switch Panel 30 A 3 positions + Off and 2 Pole as under 8358. Fully wired and ready for installation. Blue Sea 230 V AC Source Selector Switch Panel with rotary switch x 3. If either the Blue Sea Switch front or back is to be exposed...

Blue Sea 360 System Distribution Panel BS1217 is one of the most opular models but please contact us for more information on other configurations which may suit your requirements. Features Includes 4205 - square format label set Available with...

Features Isolates the Engine circuit from the House circuit Allows emergency cross connect between isolated battery banks Protects electronics from sags and spikes caused by engine cranking Specifications Number of positions: 3 Nominal voltage: 12 V...

Features Red reverse polarity indicating LED "ON" indicating LEDs installed in all circuit positions All hot, neutral and safety ground buses installed, fully pre-wired All circuit label positions are backlit on standard panels - No kit...

Features Red reverse polarity indicating LED Safety ground screw on panel back Combines switching and circuit protection into a single device "Trip Free" design cannot be held "ON" during fault current condition Specifications Nominal voltage: 230 V...

The Trem Stainless Steel Seat Swivel now in stainless steel. This has a universal fit so it will suit most types of deck chairs. Specifications Material: Stainless steel  Dimensions: 175 x 175 

Deck mounting bracket is also available as a separate item allowing use of table in various locations.

Features Made of light anodised alloy 400 to 600mm adjustable height Designed to fit Trem Captains Seat or the Trem Admiral's Seat

The Trem Admirals Seat/Chair with tough UV resistant plastic and a one piece plastic mould for strength. Specification Dimension: 40cm (depth) x 45cm (width) x 42cm (height)

The Trem Captain's Seat with tough UV protected plastic with a one piece mould for strength. Specification Dimension: 50cm (depth) x 51cm (width) x 42cm (height)

Sowester alumimum alloy adjustable chair support, extendable between 40-60cm and comes with top connector plate. Features Made of light anodized alloy 360 degree swivel 220mm compact base 400-600mm adjustable height

The Trem Skipper Seat is constructed of high density polyethylene and designed for use with small to medium sized boats. Specification Dimension: 50cm (depth) x 51cm (width) x 42cm (height)

Blue Sea WeatherDeck Toggle Switches, all models. Features Specially manufactured by Carling Technologies for use in Blue Sea Systems' WeatherDeck® Panels When mounted with a WeatherDeck® Toggle Switch Boot Rated IP67-temporary immersion for 30...

Features Rated IP67 - temporary immersion for 30 minutes UV resistant material resists discoloration and cracking Replaces dress nut for mounting on WeatherDeck panel switches Specifications Colour: Black Thread size: 15/32"- 32" Weight: 0.02 kg (0.04...

Features Designed for flybridge and open cockpit applications Rated IP67 - temporary immersion for 30 minutes Independent label backlighting allows switching and dimming Compatible with all blue sea systems digital dimmers Each panel can be mounted in...

Features Designed for flybridge and open cockpit applications Rated IP67 - temporary immersion for 30 minutes Independent label backlighting allows switching and dimming Compatible with all blue sea systems digital dimmers Each panel can be mounted in...

Blue Sea WeatherDeck® Switch Panels are waterproof and rated IP67 (for temporary immersion in water) and use materials that won't deteriorate in the harsh sun, salt, and water. Many small boats, which already have circuit protection and do not run at...

Features Designed for flybridge and open cockpit applications IP67 - protected against immersion up to 1 m for 30 minutes Independent label backlighting circuit for remote switching and dimming Integrated ATO/ATC fuse based circuit protection Each panel...

Features ON-OFF contura switches ON indicating LED's embedded in switch Watertight mounting gasket Countersunk mounting holes throughout Two-part polyurethane slate gray finish Completely wired and ready to install Will withstand the water exposures...

Features ON-OFF contura switches ON indicating LED's embedded in switch Watertight mounting gasket Countersunk mounting holes throughout Two-part polyurethane slate gray finish Completely wired and ready to install Will withstand the water exposures...

Features ON-OFF contura switches Watertight mounting gasket ON indicating LED's embedded in switch Designed for flybridge and open cockpit applications Push button reset-only circuit breakers with waterproof boots Panel front is rated IP66-protected...