Gnav slider runs on top of boom, connects to the gnav strut and carry's out the same function as a kicker or vang ( Selden 511-805-01)

The Laser Bahia Mast Step holds the mast when it is positioned upright. Bahia mast step aluminium construction, riveted to the cross beam, used to pin the mast foot to the cross beam.

RS Bahia Gennaker Pole (Formerly Laser Bahia) -Genuine Bahia Parts Specifications Weight: 1 kg Dimension: 120 × 5 × 4 cm

Auto Ratchet block 45 mm for the Laser Vago and Bahia sailboats. Ratchet blocks can come in manual or automatic versions. The manual requires a switch to turn the ratchet on and off. The auto ratchet blocks let the line run freely until it's put under...

The official replacement Laser Rudder Head with aluminum tiller for the Laser Pico or Bug Sailboats is supplied without the rudder, tiller, or tiller extension. For a full rudder with tiller kit, see code LS-8513. This rudder head is the new style...

The replacement Laser Pico Bug Rudder Blade attaches to the transom through the rudderhead. Made in aluminium with composite end plugs, top and bottom. Aluminium rudder blade for the Laser Bug and Laser Pico, which comes complete with the plastic top and...

The Laser Gudgeon fits the Laser Pico and Funboat sail craft, constructed in stainless steel. The Laser Gudgeon bolts onto the transom to attach a rudder (sold separately and comes complete with a spacer and rudder retention spring clip...

Genuine RS Laser Pico Toe Straps with padding both sides. Fitted in three positions on an RS Laser Pico: Two either side of the main hiking strap and the third in the crew forward position. Sold singularly Mounting screws sold separately M5 X 2 mm pan...

The official Laser Daggerboard Plate replacement fits Laser Pico's only. Made from black plastic, positioned above the shim, and holds the daggerboard in place. Mounted using 6 x screws (M5 X 2 mm) sold separately. Specifications Material:...

The RS Pico Slot Strip for the underside of the daggerboard plate and housing. It is a flexible lip that allows the centreboard to be passed through the deck but stops water from rushing back into the cockpit. It keeps the daggerboard casing closed so...

RS Pico / Laser Pico  5.14 m² new design main sail blue and white panels made from Dacron Specifications Colour: Blue/White With a Sail Bag Weight: 2.1 kg Dimension: 80 × 27 × 10 cm

RS Pico 1.09 m² rolled job in blue and white made from Dacron, including sail bag. Specifications Colour: Blue Weight: 1.5 kg Dimensions: 60 × 20 × 20 cm

Mast step plate, black plastic, with a large hole to take the mast foot, and 4 holes to bolt it to the hull. Specifications Material: Plastic Colour: Black

RS Pico webbing loop to fit Pico Boom with stainless rivet.  

Replacement Pico Boom with cleat, outhaul, and boom block. Official Pico parts are constructed from aluminium. Specification Material: Aluminium

Eye Plate to attach the vang system to the mast on the Laser Pico. The Vang Mast Plate features three attachment holes (3/16" x 1/2" rivets sold separately) and a curved base designed to fit the Pico Mast. Specification Material: Stainless steel

Fully detachable hiking bench for the Laser/ILCA, with adjustable hiking strap. 2 padded supports. Perfect for that extra training session. Convenient, portable, and quick to assemble due to the quick-link detachable joint design. This product is...

Sowester ILCA Laser Stacking Launching Trolley. Manufactured in high-grade stainless steel, making them lightweight and easy to handle, and entirely clean and corrosion-resistant. The trolley is designed to fit and lock into the standard ILCA Laser road...

This is one of the most popular launching trollies for Laser or ILCA Class Sailing Dinghies - Manufactured in galvanized steel, this trolley is robust and able to take a battering from multiple launches. It is designed to quickly and securely connect to...

ILCA 7 Mk11 Batten Set, approved by ILCA for all class events. ILCA 7 Batten set complete with all 3 battens and end caps. This set is suitable for the MK2 sails.

Laser batten tips that will replace the old style tips. This pack will able you to replace the ends of all 3 battens.

ILCA approved batten set to suit ILCA 4 & ILCA 6 Sails - Set of 3 - Also suits Laser 4.7 and Laser Radial. Complete batten set for ILCA 4 and ILCA 6 sails. Includes three battens with end caps. Compatible with existing Laser 4.7, Laser Radial, and...

Irish national flag for use with ILCA Laser Sails requiring sail identification. Specification Size: 567 mm x 337 mm Rules If required by the Notice of Race and the Sailing Instructions, a national flag with a nominal size of 567 x 337 mm shall be...

The Laser Red Rhombus is for the identification of ladies when racing in mixed fleets. Sails used in the women’s events shall carry a red rhombus above the top batten pocket on both sides. Features World or regional (continental)...

ILCA Laser Black Sail Number 12" come with an adhesive backing and are used for identification in sailing events and races. Approved for ILCA 6 & ILCA 7 & Laser Radial and Full Rig. Features Class legal sail numbers for ILCA 6 & ILCA 7 and...

The Laser Red Sail Number 12" come with an adhesive backing and are used for identification in sailing events and races. The 12" versions are popular for Laser 4.7,  Laser Pico and Funboat. We can attached these numbers to the sail for you...

The Laser Black Sail Numbers 9" come with an adhesive backing and are used for identification in sailing events and races. The 9" versions are popular for Laser 4.7, Laser Pico and Funboat. We can attached these numbers to the sail for you however there...

The Laser Red Sail Numbers 9" come with an adhesive backing and are used for identification in sailing events and races. The 9" versions are popular for Laser 4.7,  Laser Pico and Funboat. We can attached these numbers to the sail for you however...

ILCA 7 approved Laser Main Sail - Class compliant for all ILCA events. This sail also suits the Laser Performance L1 standard rig. Specification Mk2 (Standard Rig) cut sail Optional Extras Sail Numbers - Uses 4 x 12" Red Sail Numbers - 8 x 12"...

ILCA 6 approved Laser sail by Hyde - Class compliant for all ILCA events. This sail will also suit the Laser Radial rig. Class legal racing sail for the ILCA 6. Made from a heavy weight 3.8 oz Dacron for long sailing life and comes folded. Includes sail...

ILCA approved, stainless steel gooseneck for ILCA 4, 6 & 7 sailboats - This gooseneck also suits Laser Performance models in Standard, Radial, and 4.7 rigs Specifications Material: Stainless steel Fasteners 6 x M4.8 x 12mm Stainless Steel Rivets -...

Top mast collar black plastic fixed with rivets (sold separately). Suitable for Laser 1 and Laser Pico Masts. Specifications Material: Plastic Colour: Black

ILCA Laser Boom Plug - Inboard end to fit boom to lower mast via gooseneck fitting. Use a 12mm x  Specification Material: Plastic

Lower mast, base plug used on the ILCA6, Laser Radial, Funboat, and Pico, lower mast, includes a grooved feature to prevent sand entrapment and wear on your boat. Important Fixed in place with a 4.8 mm countersunk head rivet - It is important to use a...

ILCA Laser Boom with Harken ball bearing blocks. Official ILCA approved for all ILCA events and suitable for all Rigs- ILCA 4, ILCA 6, ILCA 7. Features Harken Boom End and  Centre Mainsheet Blocks fitted Official ILCA approved Suits All modesl...

Plug black plastic fits on the top of the mast, fixed with rivets x 2 (sold separately). It can also be used as a Laser Pico Top Mast Plug. Specifications Material: Plastic Colour: Black

Anodized aluminium tube with end plugs and sleeve fitted. A direct replacement for the top mast that comes on your Laser 4.7, Radial, or Standard rig. Suit all types of Laser sailing boats. The Laser Top Mast is too large for regular courier services, so...

The ILCA Laser rudder retaining clip prevents the rudder popping up and becoming detached. The rudder clip is easy to fit but remember to use Sikaflex or similar sealant to keep the hull watertight. Features Will secure the rudder to the transom You can...

Laser Toe Strap Padded in grey with XD logo. Internal plastic stiffener stops the Laser Toe Strap from turning over, heat sealed screw holes for easy fit. Features XD toe strap for maximum grip and control Loop will fit shockcord and toe strap...

Holt Laser Grab Rail fits all Laser Performance and ILCA Dinghies - Two required per boat - It is recommended to use a sealant, such as Sikaflex 291i, to bed screws  Accessories Sikaflex 291i Sealant - Click here