This infused GRP centerboard is a multi-boat centerboard, compatible with both the RS Bahia and Vago ( Formerly the Laser Bahia and Laser Vago)

Laser Vago and Bahia pivot bolt set to suit rudder.

The trapeze kit for the Laser Bahia with two handles, two cleats and two trapeze lines made from stainless steel wire. Optional trapeze pack for racing.

The Laser Gnav Strut suits the Laser Bahia and Vago sailboats and are constructed from aluminium tube with end fittings. It connects the mast hinge fitting to the boom slider below using two clevis pins (sold separately).

Gnav slider runs on top of boom connects to gnav strut and carry's out the same function as a kicker or vang ( Selden 511-805-01)

The Laser Bahia Mast Step holds the mast when it is positioned upright. Bahia mast step aluminium construction riveted to cross beam used to pin mast foot to cross beam.

RS Bahia Gennaker Pole (Formerly Laser Bahia) -Genuine Bahia Parts

Auto Ratchet block 45 mm for the Laser Vago and Bahia sailboats.Ratchet blocks can come in manual or automatic versions. The manual requires a switch to turn the ratchet on and off. The auto ratchet blocks let the line run freely until its put under...

The official replacement Laser Rudder Head with aluminum tiller for the Laser Pico or Bug Sailboats supplied without the rudder, tiller or tiller extension. For a full rudder with tiller kit see code LS-8513.

Laser Pico / Bug and Fusion Rudder Assembly with Blade, Head, Tiller & Tiller Extension Specifications Material: Aluminium

The replacement Laser Pico Bug Rudder Blade attaches to the transom through the rudderhead. Made in aluminium with composite end plugs top and bottom. Specifications Material: Aluminium Length: 81.5cm Width: 19cm 

The Laser Gudgeon fits the Laser Pico's and Funboat sail craft constructed in stainless steel. The Laser Gudgeon bolts onto the transom to attach a rudder (sold seperately and comes complete with a spacer and rudder retention spring clip. Specifications ...

The Laser Drop Nose Pin is used for the Picos, Vagos and Bahias - Suits the Mast Gate Claw Pin for the Laser Pico and the gooseneck connection for the Laser Vago/Bahia Mast.

High quality HOLT padded centre toestrap to suit RS Pico and Laser Pico . Replaces Laser Performance part no 83112 Mounting screws sold separately M5 X 2 mm pan head. Locator Diagram Centre Toe Strap position as indicated by Part No 83112

Genuine RS Laser Pico Toe Straps with padding both sides. Fitted in three positions on an RS Laser Pico: Two either side of the main hiking strap and the third in the crew forward position. Sold singularly Mounting screws sold separately M5 X 2 mm pan...

The official Laser Daggerboard Plate replacement firts Laser Pico's only. Made from black plastic, positioned above the shim and holds the daggerboard in place. Mounted using 6 x screws (M5 X 2 mm) sold seperately. Specifications Material: Plastic...

The RS Pico Slot Strip for the underside of daggerboard plate and housing. It is a flexible lip that allows the centreboard to be passed through the deck but stops water from rushing back into the cockpit.

RS Pico / Laser Pico  5.14 m² new design main sail blue and white panels made from Dacron Specifications Colour: Blue/White With Sail Bag

RS Pico 1.09 m² rolled job in blue and white made from Dacron including sail bag. Specifications Colour: Blue

The Mast Sleeve to suit the Laser Pico is fitted using 3/16" x 5/8" rivets (not included). The Pico Lower Mast Collar attaches to the mast and holds the boom in place, a rivet is used to hold the Pico Lower Mast Collar in Place. Specifications ...

Mast step plate, black plastic large hole to take mast foot, 4 holes to bolt it to the hull. Specifications Material: Plastic Colour: Black

The Laser Pico Gooseneck is the plastic u shaped fitting that attaches the mast to the boom while allowing it swing freely. Comes with U shaped clamp and boom insert. The Pico Gooseneck attaches the boom to the mast via a simple clipping in process.

RS Pico webbing loop to fit Pico Boom with stainless rivet  

Replacement Pico Boom with cleat, outhaul and boom block. Official Pico parts constructed from aluminium. Specifications Material: Aluminium

Eye Plate to attach the vang system the mast on the Laser Pico. The Vang Mast Plate comes with 3 attachment holes (3/16" x 1/2" rivets sold seperately) and a curved base to fit the Pico Mast. Specifications Material: Stainless steel

Laser Road Base Trailer for galvanised stacking style, launching trollies - Suits ILCA, Laser & Laser Pico sailboats. Includes the lightboard, cable and plug fitting and  complies with European Specification 793 Features Suits ILCA, Laser and...

Fully detachable hiking bench with adjustable hiking strap. Perfect for that extra training session. Convenient portable and quick to assemble due to the quick link detachable joint design. Designed by Laser sailors. Specifications Number of...

Sowester ILCA Laser Stacking Lauching Trolley. Manufactered in high grade stainless steel making them lightweight and easy to handle, and entirely clean and corrosion resistant. The trolley is designed to fit and lock into the standard ILCA Laser road...

This is one of the most popular launching trollies for Laser or ILCA Class Sailing Dinghies - Manufactured in galvanised steel, this trolley is robust and able to take a battering from multiple launches. It designed to quickly and securely connect to the...

Rooster Laser Top Cover in 1680D UV resistant Polyester in dark blue designed by Rooster sailing. The Rooster Laser Top Cover is perfect for the long storage of your Laser sailing dinghy. It comes with 1680D polyester which is super durable and...

ILCA 7 Mk11 Batten Set , approved by ILCA for all class events

Laser batten tips that will replace the old style tips. This pack will able you to replace the ends of all 3 battens.

ILCA approved batten set to suit ILCA 4 & ILCA 6 Sails - Set of 3 - Also suits Laser 4.7 and Laser Radial

Irish national flag for use with ILCA Laser Sails requiring sail identification. Specifications Size: 567 mm x 337 mm Rules If required by the Notice of Race and the Sailing Instructions, a national flag with a nominal size of 567 x 337 mm shall...

The Laser Red Rhombus is for the indentification of ladies when racing in mixed fleets. Sails used in the women’s events shall carry a red rhombus above the top batten pocket on both sides. Features World or regional (continental)...

ILCA Laser Black Sail Number 12" come with an adhesive backing and are used for identification in sailing events and races. Approved for ILCA 6 & ILCA7  & Laser Radial and Full Rig Features Class legal sail numbers for ILCA 6 &...

The Laser Red Sail Number 12" come with an adhesive backing and are used for identification in sailing events and races. The 12" versions are popular for Laser 4.7,  Laser Pico and Funboat. We can attached these numbers to the sail for you...

The Laser Black Sail Numbers 9" come with an adhesive backing and are used for identification in sailing events and races. The 9" versions are popular for Laser 4.7,  Laser Pico and Funboat. We can attached these numbers to the sail for you however...

The Laser Red Sail Numbers 9" come with an adhesive backing and are used for identification in sailing events and races. The 9" versions are popular for Laser 4.7,  Laser Pico and Funboat. We can attached these numbers to the sail for you however...

ILCA 6 approved Laser sail by Hyde - Class compliant for all ILCA events. This sail will also suit the Laser Radial rig. ILCA 6 Sail Numbering Guide Download the ILCA 6 Sail Numbering Guide here