RS LaserPico mast gate assembly which includes claw and mast gate pin but screws sold seperately. Screws Required: 2 x M6 x 20 mm Cheesehead Screws 4 x M6 x 16 mm Cheesehead/Pan Screws

The West System Epoxy A Pack includes 1 kg of epoxy resin and 0.2kg of hardener in a handy DIY pack. West System Epoxy is a versatile, moisture resistant, high-strength plastic which adheres to a wide range of materials including fibreglass and PVC. This...

The Sadelta Power Supply Unit is ideal for the power supply of radio equipment (high RFI stability) or any other small electronics run off a 12v system. Suitable for: testing multiple loads for workshops, running fridges, lights, UHF, CB radios,...

In an electrical power system onboard a boat, the busbar is a bar of tin-plated copper that conducts electricity within a switchboard, distribution board, substation, battery bank, or other electrical apparatus. Blue Sea Bus Bars 2304 are marine...

Genuine Jabsco Impellers 6303-0003 in Nitrile suitable for pumping low viscocity oils and diesel.  ( This Imeller 6303-0003 is the same as 6303-000B, 6303-000K, 6303-000P). Feature Use for diesel transfer Specifications Impeller material:...

Neoprene Neoprene use for oil/water transfer Specifications Impeller material: Neoprene Insert material: Brass Drive type: Flat Drive size: 4 Number of blades: 6 Diameter: 1 1/4" (32 mm) Width: 15/32" (12 mm) Shaft diameter: 5/16" (8 mm) Weight: 0.01...

Neoprene Use for oil/water transfer Specifications Impeller material: Neoprene Insert material: Brass Drive type: Key Drive size: 3 Number of blades: 12 Diameter: 3 1/4" (83 mm) Width: 2 57/64" (73 mm) Shaft diameter: 25/32" (21 mm) Weight: 0.53...

The Nuova Rade Sagliola Fuel Tank 73L meets the requirements of the regulation EN ISO 10088 concerning the boats up to 24 meters length. CE Approved. Features Reinforced and rupture proof Fuel input diameter 50mm Fuel output 90o / diameter...

High grade 304 stainless steel Talamex trailer winch - Buy once and never buy again with these are corrosion free trailer winches. Easy to use and easy to maintain the winch has 1 gear and is a neutral and ratchet tie in both directions. With cog wheel...

A popular 'push and twist' dinghy inflator adapter with bayonet style fitting - Suits Sowester, Plastimo or Talamex Dinghies and many more. The adapter locks in place so attention can focused on pumping. Accepts 19mm or 25mm hose.

Replacement Oarlock to suit most Talamex, Plastimo and Sowester Dinghies. Sold Singularly

Plastimo Tessilmare radial PVC fender profile (Rubbing strake) Supplied in 16m rolls x  40mm width . These patented fender profiles combine high-impact strength with elegance and good value. Features 40mm Profile 16mtr Roll Forms to hull...

ILCA 4, formerly 4.7 Laser Dinghy, fully approved for ILCA Class events. Fully equipped and supplied with high performance XD /Harken equipment, Composite Top Mast and Hyde Sails.  Element 6 is one of the recently expanded group of ILCA Laser...

The ILCA 4 ( Formerly 4.7)  Sailing Dinghy  - Approved for ILCA event The ILCA 4  features the same hull as the ILCA7(Standard) and ILCA6(Radial) but has a smaller sail plan making it more manageable for lighter and younger sailors. The...

Ex-Charter Element ILCA 6 - Sailed 1 Event Only - Australia All ex-Charter boats include: stacking trolley, foil bag, top cover & sail bags . Full carbon rig - upper & lower mast  Latest Numbers 223+++ Excellent condition with: NEW ropes...

Teleflex Dometic outboard steering splash well kit with 15° brackets. Allows the steering cable to exit the splash well without sacrificing splash protection  This cable connection is used for older model outboards without tilt tubes, low HP...

ILCA 6 Laser Dinghy (Formerly Laser Radial ), fully approved for ILCA Class events. Fully equipped and supplied with high performance XD /Harken equipment, composite top mast  and Hyde Sails.  Element 6 is one of the recently expanded group of...

The ILCA 6 ( Formerly the Radail Class) Sailing Dinghy  - Approved for ILCA event - Manufactured by leading sail boat maker, Ovingtons The ILCA Radial features the same hull as the ILCA Standard and ILCA 4.7 but has the mid-level sail plan. Used...

Teleflex Dometic inboard universal angled transom cable mounting kit. New Dometic Art no: 9130005750 

Plastimo 66203 white trim end fittings to suit Plastimo 40mm radial PVC rubbing fender profile P 66202 Features 40mm Profile Sold singullarly Colour White  

Teleflex Dometic outboard steering splash well kit with 90° brackets. Allows the steering cable to exit the splash well without sacrificing splash protection  This cable connection is used for older model outboards without tilt tubes, low HP...

ILCA 7, the full rig Laser Dinghy, fully approved for ILCA Class events. Fully equipped and supplied with high performance XD /Harken equipment, composite upper mast and Hyde Sails.  Element 6 is one of the recently expanded group of ILCA Laser...

The ILCA 7 Full Rig Sailing Dinghy approved for ILCA event - Manufactured by leading sail boat maker, Ovington  The ILCA 7 Standard Rig Boat features the same hull as the ILCA Radail and ILCA 4.7 but has the full rig Mk11 Radial sail plan. This is...

The RS Ocean Play Pico, formerly the Laser Pico is the perfect boat for training centres, club sailing and families, it can be sailed Pico double or single-handed with either mainsail only or jib and mainA simple reefing system, spacious cockpit and a...

Plastimo 66199 white trim junction fittings to cover join when using Plastimo 40mm radial PVC rubbing fender profile P66202 Features 40mm Profile Sold singullarly Colour White Top Cap / Join Cover   

Trem adjustable outboard cable steering tie bar L5303351 - Suits most single outboard installations. Specifications Stainless: 316 Length: 380mm Rod diameter: 11mm

The Fusion Duo—the most versatile, low maintenance sailing dinghy with standard mainsail & gib. Ideal for 1 -3 sailors.  Removable jib & simple reefing mainsail – all weather sailing Rowing capability – multi...

Influenced by sport and pop-culture, Frogskins™ Lite is the next evolution of the brand’s most iconic lifestyle sunglass, the Frogskins. Sporting a classic semi-rimless frame design, it features Oakley’s leading performance technology...

Official ILCA Laser Composite Upper Mast.Approved for ILCA events, suiting all rigs ILCA4, ILCA6 & ILCA7. Also suitable for Laser 4.7, Radial & Full Rig. Specifications Material: Composite / Epoxy Length: 3.6 m

Laser 4.7 bottom section is anodized aluminium tube including lower mast plug, kicker and gooseneck fittings.  The Laser 4.7 Lower Mast is pre-bent with 5 degree angle as standard. Features Waterproof anodized aluminium Comes with gooseneck and...

ILCA 4  Laser 4.7 bottom section is anodized aluminium tube including lower mast plug, kicker and gooseneck fittings.  ILCA Class Approved

Element 6,  high performance ILCA6 composite lower mast section including lower mast plug, kicker and gooseneck fittings. These Ex-Charter ILCA masts are designed with the same bend and performance characteristics as the existing aluminum masts,...

ILCA deck mounted fairlead for traveller system. Fits ILCA 7,6 & 4 and Laser standard, radial & 4.7.

Element 6,  high performance ILCA6 composite lower mast section including lower mast plug, kicker and gooseneck fittings. These new ILCA masts are designed with the same bend and performance characteristics as the existing aluminum masts, they will...

ILCA 6 lower mast section in  anodized aluminium ,including lower mast plug, kicker and gooseneck fittings. Approved for ILCA Class events - Compatible with Laser Radial Rig  

This B&G V60 VHF marine radio featuresa built-in GPS and an AIS receiver, which allows you to see nearby AIS-equipped vessels. The low-profile design radio grants flexible mounting options and supports up to two optional wireless handsets...

This B&G V60-B VHF marine radio features a built-in GPS and a full Class B AIS transmitter and receiver, which allows you to see and be seen by nearby AIS-equipped vessels. The low-profile design radio grants flexible mounting options and supports up...

This B&G V60-B VHF marine radio featuresa built-in GPS and a full Class B AIS transmitter and receiver, which allows you to see and be seen by nearby AIS-equipped vessels. The low-profile design radio grants flexible mounting options and supports up...

ILCA 7 Laser lower mast section inanodized aluminium tube including lower mast plug, kicker and gooseneck fittings. Specification Material: Aluminium ILCA Class legal

RS Pico, formerly Laser Pico aluminium upper mast complete. Specifications Material: Aluminium Shipping Notes This product can only be shipped within Ireland. We have applied a shipping surcharge due to the length of the item.