RS Laser Pico top protective cover ( Formerly Laser Pico)

RS LaserPico mast gate assembly, which includes the claw and mast gate pin, but the screws are sold separately. Complete mast gate fully assembled ready to bolt in place, includes claw but not the mast gate pin and rope Screws Required 2 x M6 x...

The West System Epoxy A Pack includes 1 kg of epoxy resin and 0.2kg of hardener in a handy DIY pack. West System Epoxy is a versatile, moisture resistant, high-strength plastic which adheres to a wide range of materials including fibreglass and PVC. This...

The Sadelta Power Supply Unit is ideal for the power supply of radio equipment (high RFI stability) or any other small electronics running off a 12V system. Suitable for: testing multiple loads for workshops, running fridges, lights, UHF, CB radios,...

In an electrical power system onboard a boat, the busbar is a bar of tin-plated copper that conducts electricity within a switchboard, distribution board, substation, battery bank, or other electrical apparatus. Blue Sea Bus Bars 2304 are marine...

Genuine Jabsco Impellers 6303-0003 in Nitrile suitable for pumping low viscocity oils and diesel.  ( This Imeller 6303-0003 is the same as 6303-000B, 6303-000K, 6303-000P). Feature Use for diesel transfer Specifications Impeller material:...

Neoprene Neoprene use for oil/water transfer Specifications Impeller material: Neoprene Insert material: Brass Drive type: Flat Drive size: 4 Number of blades: 6 Diameter: 1 1/4" (32 mm) Width: 15/32" (12 mm) Shaft diameter: 5/16" (8 mm) Weight: 0.01...

Neoprene Use for oil/water transfer Specifications Impeller material: Neoprene Insert material: Brass Drive type: Key Drive size: 3 Number of blades: 12 Diameter: 3 1/4" (83 mm) Width: 2 57/64" (73 mm) Shaft diameter: 25/32" (21 mm) Weight: 0.53...

The Nuova Rade Sagliola Fuel Tank 73L meets the requirements of the regulation EN ISO 10088 concerning the boats up to 24 meters length. CE Approved. Features Reinforced and rupture proof Fuel input diameter 50mm Fuel output 90o / diameter...

High grade 304 stainless steel Talamex trailer winch - Buy once and never buy again with these are corrosion free trailer winches. Easy to use and easy to maintain the winch has 1 gear and is a neutral and ratchet tie in both directions. With cog wheel...

A popular 'push and twist' dinghy inflator adapter with bayonet style fitting - Suits Sowester, Plastimo or Talamex Dinghies and many more. The adapter locks in place so attention can focused on pumping. Accepts 19mm or 25mm hose.

Replacement Oarlock to suit most Talamex, Plastimo and Sowester Dinghies. Sold Singularly

Plastimo Tessilmare radial PVC fender profile (Rubbing strake) Supplied in 16m rolls x  40mm width. These patented fender profiles combine high-impact strength with elegance and good value. Features 40mm Profile 16mtr Roll Forms to hull...

ILCA 4, formerly 4.7 Laser Dinghy, is fully approved for ILCA Class events. Fully equipped and supplied with high-performance XD /Harken equipment, Composite Top Mast, and Hyde Sails.  Element 6 is one of the recently expanded group of ILCA...

The ILCA 4 ( Formerly 4.7)  Sailing Dinghy  - Approved for ILCA event The ILCA 4&nbsp features the same hull as the ILCA7(Standard) and ILCA6(Radial) but has a smaller sail plan, making it more manageable for lighter and younger sailors...

Ex-Charter Element ILCA 6 - Sailed 1 Event Only - Australia All ex-Charter boats include: stacking trolley, foil bag, top cover & sail bags. Full carbon rig - upper & lower mast  Latest Numbers 223+++ Excellent condition with NEW ropes...

Plastimo radial profile fender fixing track. Pack of 8pcs x 2m tracks. Component used for fixing 40mm Plastimo Radial Profile Fendering to the hull of a vessel. Features Suits 40mm Profile Forms to hull curve Pack of 8 length, each length 2mtr Colour...

Teleflex Dometic outboard steering splash well kit with 15° brackets. Allows the steering cable to exit the splash well without sacrificing splash protection  This cable connection is used for older model outboards without tilt tubes, low HP...

ILCA 6 Laser Dinghy (Formerly Laser Radial ), fully approved for ILCA Class events. Fully equipped and supplied with high performance XD /Harken equipment, composite top mast  and Hyde Sails.  Element 6 is one of the recently expanded group of...

The ILCA 6 ( Formerly the Radial Class) Sailing Dinghy - Approved for ILCA event - Manufactured by leading sailboat maker, Ovingtons The ILCA Radial features the same hull as the ILCA Standard and ILCA 4.7, but has the mid-level sail plan. Used for...

Teleflex Dometic inboard universal angled transom cable mounting kit. New Dometic Art no: 9130005750 

Plastimo 66203 white trim end fittings to suit Plastimo 40mm radial PVC rubbing fender profile P 66202. Features 40mm Profile Sold singularly Colour White

Teleflex Dometic outboard steering splash well kit with 90° brackets. Allows the steering cable to exit the splash well without sacrificing splash protection  This cable connection is used for older model outboards without tilt tubes, low HP...

ILCA 7, the full rig Laser Dinghy, fully approved for ILCA Class events. Fully equipped and supplied with high performance XD /Harken equipment, composite upper mast and Hyde Sails.  Element 6 is one of the recently expanded group of ILCA Laser...

The ILCA 7 Full Rig Sailing Dinghy is approved for the ILCA event - Manufactured by leading sailboat maker, Ovington  The ILCA 7 Standard Rig Boat features the same hull as the ILCA Radial and ILCA 4.7, but has the full rig Mk11 Radial sail plan...

Plastimo stainless steel end fitting for 40mm Radial Strip Fendering. White or black PVC fender profile, 40 mm wide, mounted on a rigid track. End caps and junction caps in PVC or stainless steel, for an even more stylish look. Bends easily and can be...

The RS Ocean Play Pico, formerly the Laser Pico, is the perfect boat for training centres, club sailing and families, it can be sailed Pico double or single-handed with either mainsail only or jib and main A simple reefing system, spacious cockpit, and a...

Plastimo 66199 white trim junction fittings to cover join when using Plastimo 40mm radial PVC rubbing fender profile P66202. Features 40mm Profile Sold singularly Colour White Top Cap / Join Cover 

Trem adjustable outboard cable steering tie bar L5303351 - Suits most single outboard installations. Specifications Stainless: 316 Length: 380mm Rod diameter: 11mm

The Fusion Duo—the most versatile, low-maintenance sailing dinghy with standard mainsail & gib. Ideal for 1 -3 sailors.  Features Removable jib & simple reefing mainsail – all weather sailing Rowing capability –...

Fusion, the most versatile low maintenance sailboat, ideal for clubs, training centres, and family sailing - Suitable for 1-3 sailors from beginner to advanced. Upgradeable with Gib and Gennaker kits Features Simple reefing mainsail – All weather...

Fusion II—the exciting new double-handed sailing dinghy from Fusion Sailboats. Perfect for 1 -3 sailors and suiting all skill levels, this is a performance sailboat with a well-balanced Gennaker that can be tweaked down for beginners or tuned up...

Influenced by sport and pop-culture, Frogskins™ Lite is the next evolution of the brand’s most iconic lifestyle sunglass, the Frogskins. Sporting a classic semi-rimless frame design, it features Oakley’s leading performance technology...

In pop culture, it was a time like no other. Ronald Reagan was in the White House, The Terminator was in the box office and Run DMC was in certified gold. It was also the time when Oakley created one-of-a-kind sunglasses called Frogskins. Oakley...

Teleflex Morse anti- vibration kit for mounting 33c /3300 engine control cables. Features Suits all 33C / 3300 style cables Rubber shock absorber controls vibration Nylon clamps firmly hold the cables in place  Base mounting

Official ILCA Laser Composite Upper Mast.Approved for ILCA events, suiting all rigs ILCA4, ILCA6 & ILCA7. Also suitable for Laser 4.7, Radial & Full Rig. Specifications Material: Composite / Epoxy Length: 3.6 m

Laser 4.7 bottom section is anodized aluminium tube including lower mast plug, kicker, and gooseneck fittings.  The Laser 4.7 Lower Mast is pre-bent with a 5-degree angle as standard. Features Waterproof anodized aluminium Comes with gooseneck and...

Dometic Seastar HA4642 replaceable pivot plate for use with hydraulic cylinder HC4648H.

ILCA 4  Laser 4.7 bottom section is anodized aluminium tube including lower mast plug, kicker, and gooseneck fittings.  ILCA Class Approved

ILCA deck-mounted fairlead for traveller system. Fits ILCA 7,6 & 4 and Laser standard, radial & 4.7. The advantage of the Laser aluminium traveler fairlead is that it doesn't break like the plastic one. The aluminium fairlead has the same hole...