Harken

The 494 and 495 Fast Release Fairleads feature low-friction, angled stainless steel line guides on the exit side of the cleat. The angled lead keeps the line away from the cam to eliminate unexpected...

The 16 mm is Harken's smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system uses stainless steel balls in a captive grooved race and...

Harken Stand-Up Toggle with Control Tangs. Specifications Mainsheet block pin diameter: 5/16" (8 mm) Control block pin diameter: 1/4" (6 mm) Maximum working load: 4500 lb (2041 kg) Height: 2 3/16"...

A Harken battcar system along with full-length battens helps raise, douse, and reef with ease and acts as extra crew if you're sailing shorthanded. Battcar systems outperform in-mast or in-boom...

Harken gross-trim/fine-tune mainsheet systems are easy to install and use. These optimized systems decrease overall line clutter because they use less line than traditional gross-trim/fine-tune...

A Harken battcar system, along with full-length battens, helps raise, douse and reef with ease and acts as extra crew if you're sailing shorthanded. Battcar systems outperform in-mast or in-boom...

A Harken battcar system, along with full-length battens, helps raise, douse and reef with ease and acts as extra crew if you're sailing shorthanded. Battcar systems outperform in-mast or in-boom...

Wire fairleads maintain a low profile while holding the line close to the cleat. Kit Includes 468 Cam-Matic 475 wire fairlead Specifications Maximum working load: 200 lb (91 kg) Weight: 1.2 oz...

Harken ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Lightweight fiber-reinforced carbo-cams for racing where weight is critical, or where adjustments...

The X-Treme Angle Fairlead allows releasing and recleating at angles up to 90 degree to the cleat. Kit Includes Fiber-reinforced 471 Carbo Cam 476 Extreme Angle fairlead Specifications Maximum...

Wire Fairleads maintain a low profile while holding the line close to the cleat. Specifications Fastener spacing: 1 1/16" (27 mm) Fits cam: 468, 471 Height: 15/16" (23 mm) Length: 1 7/8" (48 mm)...

The X-Treme Angle Fairlead allows releasing and recleating at angles up to 90 degree to the cleat. This sets it apart from other fairleads where line uncleats at extreme angles and can’t...

Low-friction carbo air blocks are lightweight, strong, reliable and affordable. Companions to the popular Harken black magic block line, these small, compact blocks have very high working loads for...

Endstops absorb shock loads and prevent damage to the car. Kits include endstops, Loctite, 2 slug mounts. Loctite is a trademark of Hankel AG and Company KGaA. Specifications Mounting slugs per kit:...

Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. 3807 track mounts to mast using a unique slug system that allows mast-up installation...

Mounting kit slugs are available for flat or round mast grooves. Order one kit per track section. Specifications Mounting slugs per kit: 15 Connector slugs per kit: 1 Fasteners: M5 mm Mounting slug...

Made of durable, flexible PVC, stand-up boots holdblocks up without snagging lines.The 369 fits 40 mm and 57 mm Carbo and Black Magic blocks. Specifications Height (A): 2" (51 mm) Width (B): 1...

Ball bearing swivel bases feature dual rows of Delrin ball bearings that swivel freely even under high loads. Bases include stand-up springs and a U-adaptor to accept a variety of appropriate blocks...

The 16 mm is Harken's smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system uses stainless steel balls in a captive grooved race and...

The cam mounting bracket attaches the trigger cleat to 76 mm (3") low-profile triples. It fits the 152 and 411. Specifications Fastener spacing: 2 5/8" (66 mm) Fasteners: #10 TH inch (5 TH mm) Fits...

The X-Treme Angle Fairlead allows releasing and recleating at angles up to 90 degree to the cleat. This sets it apart from other fairleads where line uncleats at extreme angles and can’t...

Low-friction carbo air blocks are lightweight, strong, reliable and affordable. Companions to the popular Harken Black Magic block line, these small, compact blocks have very high working loads for...

Low-friction carbo air blocks are lightweight, strong, reliable and affordable. Companions to the popular Harken Black Magic block line, these small, compact blocks have very high working loads for...

Low-friction carbo air blocks are lightweight, strong, reliable and affordable. Companions to the popular Harken Black Magic block line, these small, compact blocks have very high working loads for...

Low-friction carbo blocks are lightweight, strong, reliable and affordable. Companions to the popular Harken Black Magic block line, these small, compact blocks have very high working loads for safe,...

Use the 237 and 339 where there is little deflection in the line such as when routing a spinnaker pole foreguy aft along the cabin house. Specifications Maximum line diameter: 1/4" (6 mm) Fastener...

The V Block delivers another breakthrough in Harken’s loop block series for Grand-Prix racers. Harken engineers have simplified the mechanics by combining the axial and thrust bearings into a...

Strong aluminum jib leads deflect jib sheets to winches, preventing overrides. These jib leads have two small drilled holes through which a loop can be spliced to attach the hobble. This temporarily...

Made of durable, flexible PVC, stand-up boots hold blocks up without snagging lines. The 370 fits 75 mm Carbo blocks. Specifications Height: 2 5/8" (67 mm) Width: 2 3/16" (55 mm) Weight: 1.1 oz. (30...

Harken Bolt-Down Fairleads are used on boats 6-15 m (20-50 ft) as shallow-angle line deflectors. These weight-saving fairleads are built of 6061-T6 Hard Lube-anodized aluminum for durability. Smooth...

Harken ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Aluminum Cam-Matics are hardcoat-anodized for high-load, high-wear, continuous adjustment...

Race once with the windward sheeting traveler car and you’ll never race without one again. Pull the car above the centerline without releasing the leeward control line. Tack, and the car stays...

Harken Bolt-Down Fairleads are used on boats 6-15 m (20-50 ft) as shallow-angle line deflectors. These weight-saving fairleads are built of 6061-T6 Hard Lube-anodized aluminum for durability. Smooth...

High-performance end controls allow the installation of 2:1 to 4:1 purchases. Designed for high-performance, free-running systems, Carbo control blocks with Delrin ball bearings let cars instantly...

High-performance end controls allow the installation of 2:1 to 4:1 purchases. Designed for high-performance, free-running systems, Carbo control blocks with Delrin ball bearings let cars instantly...

Harken Bolt-Down Fairleads are used on boats 6-15 m (20-50 ft) as shallow-angle line deflectors. These weight-saving fairleads are built of 6061-T6 Hard Lube-anodized aluminum for durability. Smooth...

Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Specifications Mainsheet block pin diameter: 1/4" (6 mm) Control block...

Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Specifications Mainsheet block pin diameter: 3/16" (5 mm) Control block pin: 5/32"...

Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Specifications Maximum working load: 850 lb (386 kg) Breaking load: 2500 lb (1134...

Harken Bolt-Down Fairleads are used on boats 6–15 m (20–50 ft) as shallow-angle line deflectors. These weight-saving fairleads are built of 6061-T6 Hard Lube-anodized aluminum for...