ILCA Laser Boats & Parts

Harken high performance XD Vang Kit with lines and Harken blocks to suits all rigs ILCA and Laser Sailboats. Includes high grade Harken vang key. The ILCA / Laser Harken Vang Assembly is a very popular ILCA dinghy upgrade. It features a 15:1 purchase,...

Designed for use on a Laser ILCA dinghy as a Vang block but equally at home on other dinghies. Strong, secure, simple and efficient. Loads are lead directly from sheaves to attachment point allowing for light side plates. Designed primarily for racing...

Holt Laser Replacement Aluminium Fairlead Boom & Deck (Pair) : HT.282ALU Holt arts are high quality replacements that perform the same function as the original part. They should not be confused with official parts bearing the Laser® registered...

Element 6, high-performance ILCA6 composite lower mast section including lower mast plug, kicker, and gooseneck fittings. These new ILCA masts are designed with the same bend and performance characteristics as the existing aluminum masts; they will not...

The 433 Dinghy Clew Hook is designed for lasers and other loose-footed dinghies. Installs permanently on the boom and allows you to instantly attach and adjust your sail in high wind and waves. Specification Weight: 0.65 oz. (18.4 g) Technical...

Pre-cut, high performance ILCA Laser traveller line in Marlow Dyneeme D12 - Suits all rigs, allows hard crank down on the traveller to bring the blocks close to deck eye Features Low friction Lightweight Low water absorption Superb low stretch for...

ILCA 7 approved Laser Main Sail - Class compliant for all ILCA events. This sail also suits the Laser Performance L1 standard rig. Optional Extras Sail Numbers - Uses 4 x 12" Red Sail Numbers - 8 x 12" Black Country Letters - 12" Black Mk2 batten Set -...

Ready to go ILCA mast strop for outhaul or downhaul spliced in Harken Fly Carbo Pulley and made with 3mm D12 Marlow Dyneema. Features Harken Fly Carbo Block Overall length 27cm Marlow 3mm D12 Dynema  Eye splice for round mast attachment

Ready to go ILCA mast strop for outhaul or downhaul spliced in Harken 29mm Carbo Pulley and made with 3mm D12 Marlow Dyneema. Features Harken 29mm Carbo Block Overal length 27cm Marlow 3mm D12 Dynema  Eye splice for round mast attachment

Ready to go ILCA downhaul mast strop with 4mm D12 Marlow Dyneema with spliced-in pulleys, 1 x Harken 29mm and 1 x Harken Fly Carbo Blocks Features 1 x Harken 29mm Carbo Block + 1 x Harken Fly Block Overall length: 70cm Marlow 4mm D12 Dynema  Eye...

Ready to go, ILCA Outhaul Mast Strop in 4mm D12 Marlow Dyneema and with 2 spliced-in Harken 29mm carbo pulleys Features 2 x Harken 29mm Carbo Blocks Overal length 33cm Marlow 4mm D12 Dynema  Eye splice for goose neck attachment

New composite Ronstan ILCA Lower Vang unit giving exceptional control and easy adjustment, and now being preferred by some of the world's leading ILCA professionals. Features Lowest friction ILCA® vang unit available HHL sheave for the high load...

Standard Nylon Washer for the Laser-branded sailing trolleys.

The Laser Trolley Stacker is a galvanized support that fits onto the side of your Laser trolley and allows you to carry two or more boats at the same time. Features Water-resistant galvanized steel Fits all Laser Standard Sailing Dinghy trollies

The Laser Pico Trolley Stacker is a galvanized support that fits onto the side of your Laser trolley and allows you to carry two or more boats at the same time. Features Water-resistant galvanized steel Fits all Laser Pico Sailing Dinghy trollies

The Laser Bahia Trolley Stacker is a galvanized support that fits onto the side of your Laser trolley and allows you to carry two or more boats at the same time. Features Water-resistant galvanized steel Fits all Laser Bahia Sailing Dinghy trollies

Top mast Plug to suit ILCA Composite upper Mast

Bottom Plug to suit ILCA Composite upper mast

Full race spec ILCA upgrade kit with Harken Deck Cam Cleats and all ropes and pulleys included.  Give full performance cockpit control to the Cunningham and Downhaul trims  

ILCA Clew Strap, the strap holds the clew tightly in place using Velcro and through clever design it is easy fitted and yet still slips nicely along the boom.

Pair of mast rig support holders for ILCA Laser spars - Made in Foam, these holders have slots to hold up to 5 spars. Placed on the desk and under the cover, these supports give good protection to your valuable spars.

Complete package of Laser® and ILCA® protection for maststep, mast, tiller, outhaul and daggerboard. Contains 2 disks for the maststep, 2 stripes for the maststep and mast deck, 2 stripes for snug fit of the top mast section, 1 stripe for the...

Precision made, high performance carbon tiller to suit all models ILCA and Laser sailboats.  Features  Flat low profile design Stainless steel travellerwear plate  Suitable for perfromance sailing 

ILCA/Laser Tiller composite construction including flexible joint and rudder down cleat - Class legal for ILCA events. Features Flat plate design Composite carbon fibre and epoxy Includes RWO tiller joint

Outhaul system for ILCA® 6 & 7 Laser Radial & Mk2 with a spliced 3 mm Dyneema® primary line with a 29 mm Harken Ti-Lite block. Made with a large loop which fits around the end of the boom for quick release. Comes with a 4 mm DB-Racing...

8:1 Downhaul system for ILCA 7 and Laser Full Rig comprising  spliced 4 mm Dyneema® primary line and two Harken blocks, the 29 mm T2 soft-attach block and the 18 mm Fly-Soft block. Comes with a 4 mm DB-Racing secondary control line, consists of...

ILCA Laser Centreboard Stop Set by Holt How to assemble Align the first cap fitting to the centre shaft and push down hard to until the shaft is flush with outer side of cap  Fit the part assembled unit to the centreboard and then align and...

Optiparts EX2150 mid boom mainsheet block for Laser and ILCA all models - Schools or Club version. Fitting Instructions Drill out old rivets to remove the boom eye and replace using 4.8mm x 12mm Stainless Rivots Specifications Sheave diameter: 40...

The Mersea 6 boat road trailer is perfect for large sailing teams. It is well balanced and easily transports 6 ILCA/ Lasers with plenty of room for sails, gear & mast tubes. With the Lighting board extending bracket and the light...

The Mersea 8 x 4 double rack, ILCA / Laser box trailer is the perfect regatta event support trailer. It is well balanced and easily transports 2 Lasers with plenty of room for sails, gear & mast tubes. 2 x Mast Rig Tubes...

An ultra-stiff, lightweight 20 mm carbon tiller extension from Windesign, including a rubber tiller joint with rope core, releasable base with pin and tubing, and fitted with x-gripped heat-shrinkable tubing. Perfect for ILCA and Laser class and other...

Ovington's ILCA Laser 22mm x 125mm carbon tiller extension with Optiflex Tiller Joint fitted - Carbon construction with spiral textured grip and flush ruberrised end cap This is the preferred size for ILCA / Laser event...

ILCA /Laser Boom Block Stainless Eye Strap  40mm Hole Centres For attaching both blocks to the ILCA / Laser booms Fasteners Use 2 x 4.8mm  x 12mm  Stainless Steel Rivets We recommend using Duralac between rivets and spars - This prevents...

Harken ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Aluminum Cam-Matics are hardcoat-anodized for high-load, high-wear, continuous adjustment applications. Specifications Minimum line diameter: 3/32" (2...

These bailer spring plates are manufactured using the highest quality spring stainless steel, designed to both retract using spring tension, and at the same time providing a surface for the activator to push against to close the chute. NOTE: This...

Rooster toestraps use a unique rubber compound that has a very high coefficient of friction, whilst also being light and durable. Our new Pro Plus Range has this rubber added to the bottom of our padded toestrap. Rooster Pro Plus Padded straps are super...

Optiparts EX2154 end of boom mainsheet block with becket for Laser and ILCA all models - Schools or Club version. Fitting Instructions  Drill out old rivets to remove the boom eye and replace using 4.8mm x 12mm Stainless...

Low-friction micro blocks are compact and lightweight. Harken Micro Blocks with 22 mm sheave are ideal for sailboards, smaller dinghies, and lightly loaded control lines on boats of all sizes. Harken Microblocks sheaves run exclusively on ball bearing...

The 16 mm is Harken’s smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system uses stainless steel balls in a captive grooved race. Specifications Sheave diameter: 5/8" (16 mm)...

Laser Road Base Trailer for galvanized stacking style, launching trollies - Suits ILCA, Laser & Laser Pico sailboats. Includes the lightboard, cable, and plug fitting and  complies with European Specification 793 Features Suits ILCA, Laser, and...