ILCA Laser Boats & Parts

Harken ILCA Laser complete mainsheet block set includes stainless steel rivets - Official ILCA class approved , this block set uses ILCA exclusive Harken bearing blocks and will fit any Laser or ILCA class dinghy. Features Enhanced performance and...

Light weather ,high performance mainsheet made from Rooster Polilite Specification Diameter : 6mm Length : 13.5m

ILCA deck mounted fairlead for traveller system. Fits ILCA 7,6 & 4 and Laser standard, radial & 4.7.

Harken 1/4" x 3/8" Stainless Clevis Pin & Ring set used to connect the Harken Vang Block to the Mast on ILCA and Laser Sailboats

The ILCA Laser XD Stainless Steel Block Plate is deck mounted to guide the Downhaul and Outhaul Control lines towards the Harken Deck Jam Cleat . The plate is mounted directly aft of the mast slot and includes 2 x Laser XD Harken 16 mm Air...

Harken high performance XD Vang Kit with lines and Harken blocks to suits all rigs ILCA and Laser Sailboats. Includes high grade Harken vang key  

Specifications Aluminium Hard anodised Inside diameter: 6mm Fixing hole size: 4mm Fixing spacing: 23mm Weight: 12g

ILCA Laser Radial ILCA6 composite bottom mast section including lower mast plug, kicker and gooseneck fittings. These new ILCA masts are designed with the same bend and performance characteristics as the existing aluminum masts, they will not provide a...

The 433 Dinghy Clew Hook is  designed for lasers and other loose-footed dinghies. Installs permanently on the boom and allows you to instantly attach and adjust your sail in high wind and waves. Weight: 0.65 oz. (18.4 g) Technical...

Pre-cut, high performance ILCA Laser traveller line in Marlow Dyneeme D12 - Suits all rigs, allows hard crank down on the traveller to bring the blocks close to deck eye Features Low friction Lightweight Low water absorption Superb low stretch for...

ILCA Clew Strap, the strap holds the clew tightly in place using Velcro and through clever design it is easy fitted and yet still slips nicely along the boom.

Pair of mast rig support holders for ILCA Laser spars - Made in Foam these holders have slots to hold up to 5 spars. Placed on desk and under the cover these supports give good protection to you valuable spars.  

Complete package of Laser® and ILCA® protection for maststep, mast, tiller, outhaul and daggerboard. Contains 2 disks for the maststep, 2 stripes for the maststep and mast deck, 2 stripes for snug fit of the top mast section, 1 stripe for the...

Precision made, high performance carbon tiller to suit all models ILCA and Laser sailboats.  Features  Flat low profile design Stainless steel travellerwear plate  Suitable for perfromance sailing 

ILCA/Laser Tiller composite construction including flexible joint and rudder down cleat - Class legal for ILCA events Features Flat plate design  Composite carbon fibre and epoxy Includes RWO tiller joint

DB-Racing Vang Line Pack comes with 3 mm Dyneema® primary vang line for Laser® and ILCA® with a spliced loop on one side for easy attachmentand  4 mm DB-Racing secondary control line, consists of a Dyneema® core and Technora /...

Outhaul system for ILCA® 6 & 7 Laser Radial & Mk2 with a spliced 3 mm Dyneema® primary line with a 29 mm Harken Ti-Lite block. Made with a large loop which fits around the end of the boom for quick release. Comes with a 4 mm DB-Racing...

Outhaul system for Laser® 4.7 and ILCA® 4 with a spliced 3 mm Dyneema® primary line with a 29 mm Harken Ti-Lite block. Made with a large loop which fits around the end of the boom for quick release. Comes with a 4 mm DB-Racing secondary...

6:1 Downhaul system for ILCA 7 and Laser Full Rig with a spliced 5 mm Dyneema® primary line with a 29 mm Harken Ti-Lite block. Comes with a 4 mm DB-Racing secondary control line, consists of a Dyneema® core and Technora / polyester cover for...