ILCA Laser Boats & Parts
Official ILCA Class Dinghes and Equipment approved for ILCA Class Sailing controlled events worldwide including, the Olympics, World's, Nationals and Provincial.
-
ILCA Laser Harken Mainsheet & Traveller Block Set
ILCA
SEK972.07Harken ILCA Laser complete mainsheet block set includes stainless steel rivets - Official ILCA class approved , this block set uses ILCA exclusive Harken bearing blocks and will fit any Laser or ILCA class dinghy. Features Enhanced performance and...ILC-BLOCK SETSEK972.07 -
Laser Mainsheet Rope 6mm x 13.5m -Rooster Polilite
Rooster
SEK306.62Light weather ,high performance mainsheet made from Rooster Polilite Specification Diameter : 6mm Length : 13.5mLSR-30001SEK306.62 -
ILCA Aluminium Traveler Fairlead
ILCA
SEK91.63ILCA deck mounted fairlead for traveller system. Fits ILCA 7,6 & 4 and Laser standard, radial & 4.7.ILC5912SEK91.63 -
ILCA Laser Clevis Pin & Ring - Connects Harken Vang to Mast Fitting
ILCA
SEK122.34Harken 1/4" x 3/8" Stainless Clevis Pin & Ring set used to connect the Harken Vang Block to the Mast on ILCA and Laser SailboatsSOW2318SEK122.34 -
ILCA Laser Harken XD Deck Plate with Harken Air Blocks
ILCA
SEK777.55The ILCA Laser XD Stainless Steel Block Plate is deck mounted to guide the Downhaul and Outhaul Control lines towards the Harken Deck Jam Cleat . The plate is mounted directly aft of the mast slot and includes 2 x Laser XD Harken 16 mm Air...ILC5920SEK777.55 -
ILCA Laser XD Vang Kit - Harken Blocks
ILCA
SEK2,815.37Harken high performance XD Vang Kit with lines and Harken blocks to suits all rigs ILCA and Laser Sailboats. Includes high grade Harken vang keyILC4940SEK2,815.37 -
SEK316.86
-
Holt Aluminium Fairlead Deck & Boom (Pair)
Holt
SEK255.43Specifications Aluminium Hard anodised Inside diameter: 6mm Fixing hole size: 4mm Fixing spacing: 23mm Weight: 12gHT.282ALUSEK255.43 -
ILCA 6 Laser Lower Mast Section - Composite
ILCA
SEK10,391.27ILCA Laser Radial ILCA6 composite bottom mast section including lower mast plug, kicker and gooseneck fittings. These new ILCA masts are designed with the same bend and performance characteristics as the existing aluminum masts, they will not provide a...ILC1635SEK10,391.27 -
Harken Dinghy Clew Hook 433
Harken
SEK275.91The 433 Dinghy Clew Hook is designed for lasers and other loose-footed dinghies. Installs permanently on the boom and allows you to instantly attach and adjust your sail in high wind and waves. Weight: 0.65 oz. (18.4 g) Technical...HK433SEK275.91 -
ILCA Laser Traveller Line Dyneema D12 SK78 - 6mm x 3.5m Lime
Laser
SEK306.62Pre-cut, high performance ILCA Laser traveller line in Marlow Dyneeme D12 - Suits all rigs, allows hard crank down on the traveller to bring the blocks close to deck eye Features Low friction Lightweight Low water absorption Superb low stretch for...LSM-30034SEK306.62 -
ILCA Clew Strap
ILCA
SEK163.29ILCA Clew Strap, the strap holds the clew tightly in place using Velcro and through clever design it is easy fitted and yet still slips nicely along the boom.ILC4934SEK163.29 -
Windesign ILCA Laser Spar Carrier
Windesign
SEK572.80Pair of mast rig support holders for ILCA Laser spars - Made in Foam these holders have slots to hold up to 5 spars. Placed on desk and under the cover these supports give good protection to you valuable spars.OPEX2066SEK572.80 -
Optiparts ILCA/ Laser Protection Pack
Optiparts
SEK623.99Complete package of Laser® and ILCA® protection for maststep, mast, tiller, outhaul and daggerboard. Contains 2 disks for the maststep, 2 stripes for the maststep and mast deck, 2 stripes for snug fit of the top mast section, 1 stripe for the...OPEX2001SEK623.99 -
Holt ILCA / Laser Carbon Tiller
Holt
SEK2,384.87Precision made, high performance carbon tiller to suit all models ILCA and Laser sailboats. Features Flat low profile design Stainless steel travellerwear plate Suitable for perfromance sailingHT7240SEK2,384.87 -
G-Composites ILCA / Laser Composite Tiller - Flat Version
Rooster
SEK2,446.81ILCA/Laser Tiller composite construction including flexible joint and rudder down cleat - Class legal for ILCA events Features Flat plate design Composite carbon fibre and epoxy Includes RWO tiller jointILC3930SEK2,446.81 -
DB-Racing Vang Lines Pack - Suits ILCA® & Laser
Optiparts
SEK286.14DB-Racing Vang Line Pack comes with 3 mm Dyneema® primary vang line for Laser® and ILCA® with a spliced loop on one side for easy attachmentand 4 mm DB-Racing secondary control line, consists of a Dyneema® core and Technora /...OPEX2216SEK286.14 -
DB-Racing Outhaul System - Suits ILCA® 6 & 7 Laser Radial & Mk2
Optiparts
SEK644.46Outhaul system for ILCA® 6 & 7 Laser Radial & Mk2 with a spliced 3 mm Dyneema® primary line with a 29 mm Harken Ti-Lite block. Made with a large loop which fits around the end of the boom for quick release. Comes with a 4 mm DB-Racing...OPEX2212SEK644.46 -
DB-Racing Outhaul Kit - Suits ILCA 4 and Laser 4.7
Optiparts
SEK644.46Outhaul system for Laser® 4.7 and ILCA® 4 with a spliced 3 mm Dyneema® primary line with a 29 mm Harken Ti-Lite block. Made with a large loop which fits around the end of the boom for quick release. Comes with a 4 mm DB-Racing secondary...OPEX2208SEK644.46 -
DB-Racing 6:1 Downhaul Kit - Suits ILCA 4 & 6 and Laser 4.7 & Radial
Optiparts
SEK695.656:1 Downhaul system for ILCA 7 and Laser Full Rig with a spliced 5 mm Dyneema® primary line with a 29 mm Harken Ti-Lite block. Comes with a 4 mm DB-Racing secondary control line, consists of a Dyneema® core and Technora / polyester cover for...OPEX2200SEK695.65