Laser Bahia

Laser Bahia / Vago mast jib sheave box with nylon pulley  90623 - (Selden 505-071-01 )

Assembled ready to sail, rudder head, tiller, rudder blade and extension

Laser Bahia rudder head assembly.

Long rudder pin to attach rudder head to gudgeons.

Laser Bahia and Vago mainsheet block assembly. Does not include standup pulley (See Code: LS-91333).

Mesh gennaker sock in grey to cover and protect the gennaker on your Laser Bahia.

The Bahia Gennaker size is 12.78 m² and is supplied with our 214 Spec Boat. The Gennaker has red panels made from rip stop nylon including sail bag. Specifications Colour: Red Size: 12.78 m²

The Bahia Main Sail size is 10 m² and is supplied rolled with grey panels and reefing points made from Dacron, including long sail bag. Specifications Material: Dacron Colour: Grey Size: 10 m²

The Bahia Jib size is 3.75 m² and comes supplied rolled with white panels made from Dacron including long sail bag.

The Bahia Gennaker size is 14.00 m² and had been supplied with our Bahia from 2006 to 2013. The Gennaker has red panels made from rip stop nylon including sail bag. For those that like to roam and travel in the outdoors, Bahia will help get you...

Laser Bahia lower shroud wire and rope to suit the Laser Bahia Masts. Comes supplied with crimped eye to connect to deck (shackle not included).

Replacement Jib Halyard for the Laser Bahia sailing dinghy with wire halyard and rope tail.

The swivel to connect the Laser Bahia and Vago Jib Halyards to the decks.

Laser Bahia forestay wire to connect to mast. Specifications Material: Stainless steel

This furling is the official direct replacement for the Laser Vago and Laser Bahia furling drums.

The replacement eyelet for the deck of the Laser Bahia or the bow of the Dart 16 screw in Bow eye.

Replacement Inspection Port for the Laser Bahia and Laser Bug. Specifications Diameter: 4"

Metal gudgeon plates to suit the Laser Bahia and Vago sailing dinghies. Use the same part for the top and bottom gudgeons. Holds the rudder pintle on the transom.

Laser Vago and Bahia pivot bolt set to suit rudder.

The Laser Bahia Rudder comes assembled and ready to sail with rudder head, tiller, rudder blade and extension.

The trapeze kit for the Laser Bahia with two handles, two cleats and two trapeze lines made from stainless steel wire. Optional trapeze pack for racing.

Toe strap set in grey includes two long and two short. Specifications Colour: Grey Number of strap: 4

The Bahia Oars comes as a set of two oars that separate into three sections. With a simple push of a lock the Bahia oars come apart to help with packing.     L = 115cm H = 23 cm W = 23cm

Laser Bahia Storage Lid to suit the storage box onboard your dinghy, which doubles up as a seat for rowing. Specifications Colour: Red

The storage box for the Bahia can also be used as a seat. Due to the size of the box you can fit all the things you need for a days sailing while not taking to much space up within the cockpit. It is easily installed on all Laser Bahias...

The Bahia engine bracket will take a 2 hp or 3 hp engine. Please note that the Engine will no longer fit in the Storage Box due to size.

The Vago/Bahia Boom inboard end to attach to gooseneck on mast of any Laser Bahia or Vago sailing dinghy, requires 3/16" x 5/8" stainless steel rivets. Specifications Rivet material: Stainless steel Number of rivet: 4

An elegant design in aluminium with a silver or hard anodised finish. The rope drops down into the teeth. Specifications Material: Aluminium Colour: Silver Rope size: 3 mm - 6 mm Require bolt: 2 x 4 mm Dimension: 48 mm x 15 mm x 36 mm

Eyeplate to suit Laser 1 and Laser Bahia masts. Comes with 3 x rivets included for attachment.

Roto moulded mast head float in ice blue complete with all fittings and instructions to install float on mast head.

Replacement top mast pulley cap for the Laser Bahia and Laser Vago sailing craft.

Laser Bahia Shroud wire is supplied as a single wire for the Bahia Mast.

The Laser Gnav Strut suits the Laser Bahia and Vago sailboats and are constructed from aluminium tube with end fittings. It connects the mast hinge fitting to the boom slider below using two clevis pins (sold separately).

Gnav slider runs on top of boom connects to gnav strut and carry's out the same function as a kicker or vang ( Selden 511-805-01)

The Laser Gnav Mast Fitting connects the hinges on the strut to the mast with the drop nose pin included.

Plastic replacement Bhaia mast heel. This part is also known as the 'Laser Bahia Mast Foot' not to be confused with the Laser Bahia Mast Step.

The Laser Bahia Mast Step holds the mast when it is positioned upright. Bahia mast step aluminium construction riveted to cross beam used to pin mast foot to cross beam.

The replacement Laser Bahia Gennaker Pole as under Laser No. 8981.

Fully rigged mast complete with all fittings, halyards, standing rigging wires and spreaders.

The replacement sheave to suit the mast head on all Laser and Bahia sailing boats. The Laser Sheave is made from nylon plastic and fits onto the top of the mast with a clevis pin 3/16" x 1" (sold separately). Specifications Material: Nylon plastic