Laser Spars & Fittings
-
Windesign ILCA Laser Spar Carrier
Windesign
ZAR1,115.15Pair of mast rig support holders for ILCA Laser spars - Made in Foam these holders have slots to hold up to 5 spars. Placed on desk and under the cover these supports give good protection to you valuable spars.OPEX2066ZAR1,115.15 -
Optiparts ILCA/ Laser Protection Pack
Optiparts
ZAR1,214.80Complete package of Laser® and ILCA® protection for maststep, mast, tiller, outhaul and daggerboard. Contains 2 disks for the maststep, 2 stripes for the maststep and mast deck, 2 stripes for snug fit of the top mast section, 1 stripe for the...OPEX2001ZAR1,214.80 -
Official ILCA Laser Composite Upper Mast Section
ILCA
ZAR17,539.37Official ILCA Laser Composite Upper Mast - Approved for ILCA events , suits all rigs ILCA4. ILCA6 & ILCA7 Also suitable for Laser 4.7, Radial & Full Rig Speciications Material: Composite / Epoxy Length: 3.6 mILC1925ZAR17,539.37 -
ZAR98.66
-
ILCA Laser Lower Vang Tang - Official
Laser
ZAR218.25Stainless steel kicking strap plate for Standard, Radial and 4.7 lower mast attached with rivets. Not nlcuded Specifications Material: Stainless steel Fasteners 4.8mm x 12.8mm Stainless RivetsILC4923ZAR218.25 -
ILCA Laser Lower Mast Base Plug - Fits ILCA 4 &7, Laser 4.7 & Full Rig
ILCA
ZAR138.52Lower mast, base plug to suit ILCA 4 & 7 and Laser 4.7 and Full Rig Sail boats -Includes grooved feature to prevent sand entrapment and wear on you boat. Important Fixed in place with 4.8mm countersunk head rivet - It is important to use a...ILC4926ZAR138.52 -
ILCA 6 Laser Lower Mast Section - Composite
ILCA
ZAR20,230.07ILCA Laser Radial ILCA6 composite bottom mast section including lower mast plug, kicker and gooseneck fittings. These new ILCA masts are designed with the same bend and performance characteristics as the existing aluminum masts, they will not provide a...ILC1635ZAR20,230.07 -
Laser Boom Block 40mm Eyestrap - 91537
Laser
ZAR118.59Laser Boom Block Stainless Eye Strap 40mm Hole Centres For attaching both blocks to Laser booms Fasteners Use 2 x 4.8mm x 12mm Stainless Steel Rivets We recommend using Duralac between rivets and spars - This prevents corrosion by...ZAR118.59 -
Clamcleat CL211 MK1 Silver Junior Racing Cleat - 3-6mm Lines
Clamcleat
ZAR218.25The Clamcleat® CL211 Mk1 Racing Junior is a very strong alloy cleat with a fairlead to guide the rope into the teeth. The specially shaped base means the CL211 Mk1 means it can be fitted to either curved or flat surfaces The CL211 Mk1 has...CL211 MK1/RZAR218.25 -
Rooster Laser Mast Teflon Disc
Rooster
ZAR178.38Just a small teflon disc to drop into the mast hole, soft enough to help absorb any grit. Take it out regularly to clean off the grit. Helps to prevent wear to the boat. Specifications Disc diameter 60mm Suitable for classes Laser Thickness 1mmROOSTER-100649ZAR178.38 -
Optiparts Upper Mast and Boom End Plug for Laser
Optiparts
ZAR178.38Features Top plug for Laser upper mast and end plug for outer boom end Replacement part for Laser sailing and sailing schoolsOPEX2124ZAR178.38 -
Optiparts Bottom Mast Plug for Laser
Optiparts
ZAR178.38Optiparts Bottom Mast Plug for Laser replacing the mast plug in your boat.OPEX2120ZAR178.38