Laser Spars & Fittings
-
Windesign ILCA Laser Spar Carrier
Windesign
RUB5,573.91Pair of mast rig support holders for ILCA Laser spars - Made in Foam these holders have slots to hold up to 5 spars. Placed on desk and under the cover these supports give good protection to you valuable spars.OPEX2066RUB5,573.91 -
Optiparts ILCA/ Laser Protection Pack
Optiparts
RUB6,072.03Complete package of Laser® and ILCA® protection for maststep, mast, tiller, outhaul and daggerboard. Contains 2 disks for the maststep, 2 stripes for the maststep and mast deck, 2 stripes for snug fit of the top mast section, 1 stripe for the...OPEX2001RUB6,072.03 -
Official ILCA Laser Composite Upper Mast Section
ILCA
RUB87,668.33Official ILCA Laser Composite Upper Mast - Approved for ILCA events , suits all rigs ILCA4. ILCA6 & ILCA7 Also suitable for Laser 4.7, Radial & Full Rig Speciications Material: Composite / Epoxy Length: 3.6 mILC1925RUB87,668.33 -
RUB493.13
-
ILCA Laser Lower Vang Tang - Official
Laser
RUB1,090.87Stainless steel kicking strap plate for Standard, Radial and 4.7 lower mast attached with rivets. Not nlcuded Specifications Material: Stainless steel Fasteners 4.8mm x 12.8mm Stainless RivetsILC4923RUB1,090.87 -
ILCA Laser Lower Mast Base Plug - Fits ILCA 4 &7, Laser 4.7 & Full Rig
ILCA
RUB692.38Lower mast, base plug to suit ILCA 4 & 7 and Laser 4.7 and Full Rig Sail boats -Includes grooved feature to prevent sand entrapment and wear on you boat. Important Fixed in place with 4.8mm countersunk head rivet - It is important to use a...ILC4926RUB692.38 -
ILCA 6 Laser Lower Mast Section - Composite
ILCA
RUB101,117.45ILCA Laser Radial ILCA6 composite bottom mast section including lower mast plug, kicker and gooseneck fittings. These new ILCA masts are designed with the same bend and performance characteristics as the existing aluminum masts, they will not provide a...ILC1635RUB101,117.45 -
Laser Boom Block 40mm Eyestrap - 91537
Laser
RUB592.76Laser Boom Block Stainless Eye Strap 40mm Hole Centres For attaching both blocks to Laser booms Fasteners Use 2 x 4.8mm x 12mm Stainless Steel Rivets We recommend using Duralac between rivets and spars - This prevents corrosion by...RUB592.76 -
Clamcleat CL211 MK1 Silver Junior Racing Cleat - 3-6mm Lines
Clamcleat
RUB1,090.87The Clamcleat® CL211 Mk1 Racing Junior is a very strong alloy cleat with a fairlead to guide the rope into the teeth. The specially shaped base means the CL211 Mk1 means it can be fitted to either curved or flat surfaces The CL211 Mk1 has...CL211 MK1/RRUB1,090.87 -
Rooster Laser Mast Teflon Disc
Rooster
RUB891.63Just a small teflon disc to drop into the mast hole, soft enough to help absorb any grit. Take it out regularly to clean off the grit. Helps to prevent wear to the boat. Specifications Disc diameter 60mm Suitable for classes Laser Thickness 1mmROOSTER-100649RUB891.63 -
Optiparts Upper Mast and Boom End Plug for Laser
Optiparts
RUB891.63Features Top plug for Laser upper mast and end plug for outer boom end Replacement part for Laser sailing and sailing schoolsOPEX2124RUB891.63 -
Optiparts Bottom Mast Plug for Laser
Optiparts
RUB891.63Optiparts Bottom Mast Plug for Laser replacing the mast plug in your boat.OPEX2120RUB891.63