Lighting

24v lead acid battery charger C26665-01 to suit Francis Aldis FSP127 Signalling Lamp -  Input voltage 110-240VAC, Output 14.7 VDC. Specification Charge Rate: 24v vdc @ 1 amp  Input: 110v / 220v AC Output: 24 DC Weight 1.9Kg 

Jabsco sealed beam to suit Jabsco  7" Remote Control Searchlight 62040-4006 24v. Feature 24v (28v) x 450W

This is the replacement sealed-beam unit with a trapezoidal beam designed for use with the Jabsco 45960-0000. It operates on a 12-volt power supply, providing reliable performance for your specific needs. Ensure proper compatibility and functionality by...

Available with two bulb types: flood for glare-free below deck mounting (JAB 18753-0351) or trapezoidal for deck illumination (JAB 18753-0352). Easily adjustable light angle, up to 7° horizontally and 12° vertically. Sealed beam tungsten halogen...

Bracket mounted xenon floodlights that deliver four times the light output of halogen floodlights and last up to five times longer. Typically used for deck lighting, emergency lighting, launching and docking, and commercial fishing boat applications...

Bracket mounted xenon floodlights that deliver four times the light output of halogen floodlights and last up to five times longer. Typically used for deck lighting, emergency lighting, launching and docking, and commercial fishing boat applications...

Extension Harnesses enable remote controls to be fitted further from the light than standard cables allow, and are needed to install Secondary Remote Control Kits. Features For searchlight installations where cable length exceeds that supplied with the...

Extension Harnesses enable remote controls to be fitted further from the light than standard cables allow, and are needed to install Secondary Remote Control Kits. Features For searchlight installations where cable length exceeds that supplied with the...

Extension Harnesses enable remote controls to be fitted further from the light than standard cables allow, and are needed to install Secondary Remote Control Kits. Features For searchlight installations where cable length exceeds that supplied with the...

Secondary Remote Control Kit allow searchlights to be operated from both upper and lower helm stations. Kit includes secondary control panel, station selector panel V-splices and butt connectors. Secondary Harness must be selected from Extension Harness...

Secondary Remote Control Kit allow searchlights to be operated from both upper and lower helm stations. Kit includes secondary control panel, station selector panel V-splices and butt connectors. Secondary Harness must be selected from Extension Harness...

Secondary Remote Control Kit allow searchlights to be operated from both upper and lower helm stations. Secondary Harness must be selected from Extension Harness options. Specifications DC voltage: 12 V/24 V 155SL voltage: 12 V Kit Includes Secondary...

Extension Harnesses enable remote controls to be fitted further from the light than standard cables allow, and are needed to install Secondary Remote Control Kits. Features For 155 SL (12/24 V DC) and all 6" (150 mm) RC models For 233 SL (12/24 V DC) ...

Extension Harnesses enable remote controls to be fitted further from the light than standard cables allow, and are needed to install Secondary Remote Control Kits. Features For 155 SL (12/24 V DC) and all 6" (150 mm) RC models For 233 SL (12/24 V DC) ...

Extension Harnesses enable remote controls to be fitted further from the light than standard cables allow, and are needed to install Secondary Remote Control Kits. Features For 155 SL (12/24 V DC) and all 6" (150 mm) RC models For 233 SL (12/24 V DC) ...

Extension Harnesses enable remote controls to be fitted further from the light than standard cables allow, and are needed to install Secondary Remote Control Kits. Features For 155 SL (12/24 V DC) and all 6" (150 mm) RC models For 233 SL (12/24 V DC) ...

Secondary Remote Control Kit allow searchlights to be operated from both upper and lower helm stations. Kit includes secondary control panel, Y-adapter and 15' (4.5 m) cable. Secondary Harness must be selected from Extension Harness options. Features ...

Standard with most Jasbsco lights, but can be used with other 12v searchlights. Features Water tight design is suitable for flybridges and other wet locations. Built in fuse and plug connectors for easy wiring Specifications DC voltage: 12 V Weight: 0...

This Jabsco 18753-0336 replacement sealed beam will suit both the 12v Jabsco 255SL Searchlight 60010-2012 and the 24V Jabsco 255SL Searchlight 60010-202 Sealed Beam Detail

Specifications DC voltage: 12 V/24 V Weight: 0.80 kg

Specifications Controller: 7" and 8" DC voltage: 24 V Weight: 0.27 kg

Specifications Diameter: 8" (200 mm) DC voltage: 24 V Bulb power: 100 W Candle power: 5,00,000

Specifications Diameter: 7" (180 mm) DC voltage: 24 V Bulb power: 170 W Candle power: 2,30,000

Specifications Diameter: 5" (130 mm) DC voltage: 12 V Bulb power: 100 W Candle power: 2,30,000

Francis waterproof 3 pin plug and socket with captive cap to suit the FSP127 Aldis Lamp. This power supply point can be used as a bulkhead connection to power your signalling light anywhere you need. Chrome plated brass connector with sealing ring and...

C05971-01 Amber Filter Disc Assembly to suit the FSP127 Francis Aldis Light Signal. See the Francis datasheet below for dimensions on the amber lens. Specifications Weight: 103g  Quantity: 1 Diameter: 146mm

C05971-01 Yellow Filter Disc Assembly to suit the FSP127 Francis Aldis Light Signal. See the Francis datasheet below for dimensions on the yellow lens. Specifications Weight: 103g  Quantity: 1 Diameter: 146mm

C05971-01 Blue Filter Disc Assembly to suit the FSP127 Francis Aldis Light Signal. See the Francis datasheet below for dimensions on the blue lens. Specifications Weight: 103g  Quantity: 1 Diameter: 146mm

C05971-01 Green Filter Disc Assembly to suit the FSP127 Francis Aldis Light Signal. See the Francis datasheet below for dimensions on the green lens. Specifications Weight: 103g Quantity: 1 Diameter: 146mm

C05971-01 Red Filter Disc Assembly to suit the FSP127 Francis Aldis Light Signal. See the Francis datasheet below for dimensions on the red filter. Specifications Weight: 103g  Quantity: 1 Diameter: 146mm

Replacement 24v x 60w lamps suits the Francis Aldis Lamp FSP 127. Francis part no: D1721. Notes SOLAS approval for commercial ships requires 3 bulbs

Replacement 12v  x 60w lamps suits the Francis Aldis Lamp FSP 127. Francis part no: D1721. Notes SOLAS approval for commercial ships requires 3 bulbs

12v lead acid battery charger C26664-00 to suit Francis Aldis FSP127 Signalling Lamp -  Input voltage 110-240VAC, Output 14.7 VDC. Specification Charge Rate: 12v vdc @ 2 amp  Input: 110v / 220v AC Output: 12v DC Weight 1...

The Francis Aldis Light Kit sends light signals for communication for large vessels at sea. It contains everything you need to comply with the SOLAS regulation regarding commercial vessels. Comes with 2 x filters, 3 x 12v bulbs, 1 x 24v battery charger...

The Francis Aldis Light Kit comes with everything you need to comply with the SOLAS regulation regarding commercial vessels. Comes with 3 x filters, 3 x 12V bulbs, 1 x 12V battery charger and a storage case as under Francis part no: A6134.Comes with high...

The Francis FSP127 Aldis Lamp fulfils the requirements of the Solas (1997) Regulations, which states that all ships of over 150 tons gross tonnage, when engaged on International voyages, shall have onboard an efficient daylight signalling lamp which...

Comes with gasket to suit the Jabsco 155SL Remote Control Searchlight. Replacement bulb to suit the 12 V or 24 V 155SL. Specifications DC voltage: 12 V/24 V Bulb power: 50 W Fuse size: 5 A Candle power: 1,00,000

A replacement sealed beam unit to suit both 12 V and 24 V systems. This replacement bulb fits the Jabsco 135SL Searchlights. 135 SL - 60020-0000 Specifications DC voltage: 12 V Fuse size: 4 A Bulb power: 50 W Candle power: 1,00,000 135 SL -...

The Francis MK1 Searchlight M Series is seen here on the right. The MK1 will suit either a 12v/24v in 5w/1w bulb (sold seperately) which can be ordered under the related products tab below.These attractive, quality built searchlights are suitable for...

The Francis Searchlight M Series featuring the M1 seen here on the right. The M1 will suit either a 12v or 24v bulb (sold seperately) which can be ordered under the related products tab below.These attractive, quality built searchlights are suitable for...