Masterbus

MasterBus controllable potential-free contact, with alarm notification on the onboard system (low voltage or no AC), usable as CSI alarm contact. This potential-free programmable contact can be customised and programmed to give your MasterBus network...

This interface integrates a Mastervolt Mass Combi in a MasterBus network and allows it to be operated or monitored via a EasyView 5 panel or PC. General Specifications MasterBus powering: Yes Delivered with: Interface connection cable, MasterBus...

Connect conventional Mastervolt products to MasterBus. Data becomes permanently available to allow configuration, operation and monitoring via EasyView 5 or PC. Suitable for Masterlink BTM-III, Mac and Magic DC-DC converters. General Specifications ...

This interface converts analogue sensor input signals to MasterBus data. Selectable input signals: 4-20 mA, 0-300 Ω, 8-70 V DC. General Specifications MasterBus powering: No Delivered with: MasterBus cable, MasterBus terminator, user’s...

The MasterBus USB Interface enables you to read and configure the MasterBus network via your PC. General Specifications MasterBus powering: Yes (when the PC is switched on) Delivered with: USB connection cable, MasterBus cable, MasterBus terminator,...

The MasterBus Philippi Interface makes it possible to view and control Mastervolt products on a Philippi PSM2 display. Mastervolt products use the CAN-based MasterBus protocol to communicate between products. Similar, the company Philippi uses the PBUS...

The MasterBus NMEA2000 Interface provides the Masterbus network with NMEA information, and vice versa. General Specifications MasterBus powering: No Delivered with: NMEA connection cable, MasterBus cable, MasterBus terminator, manual Dimensions (H x W x...

Switches all AC loads, no matter where they are. Loads up to 6 A can be directly switched, higher loads should be switched via a relay. General Specifications Maximum relay current: 6 A (230 V AC single pole) MasterBus powering: No Delivered with:...

The DC Distribution 500 is the smallest distribution model available. It connects up to four DC devices, such as a battery charger, inverter, alternators and solar panels. With the plug & play cable it can be easily connected to the MasterBus network...

MasterShunt is the heart of every battery powered energy system. This integrated battery monitor shares information about the battery bank with other MasterBus, CZone or NMEA 2000 enabled devices such as battery chargers, inverter/chargers and displays...