Optimist Dinghy Parts

There is no equal to the Optiparts BLACKGOLD™ Optimist spar sets. This medium selection will suit sailors of all weights Features All black fittings Hard anodized cleats Black sprit chafe guard Captive eye straps on the boom Halyard cleat with...

The Optiparts Optimist Training School Boom EX1030 has blue nylon in and outboard end fittings, a nylon outhaul cleat, and nylon fittings for mainsheet and downhaul attachment. Not suitable for official racing events. Specification Diameter: 32 mm

Lightweight aluminium trolley for the Laser® Pico. Spring locking quick release of all parts allows the trolley to be disassembled in a matter of seconds for storage and travel. The frame has welded joints and is anodized to prevent corrosion. This...

Optimist 48L Blue Buoyancy Bag with twist lock tube and valve. The 48-liter buoyancy bags are slightly heavier than the 43-liter buoyancy bags, but tend to leave a lot less water in the boat after a capsize Optimist buoyancy bags from Optiparts are made...

Boom button for the Silver and School booms from Optiparts.

These Optimist buoyancy bags are made of polyurethane-coated nylon and are about half the weight and significantly stronger than buoyancy bags made of PVC or PVC-coated nylon. Some buoyancy bags are available with a twist-lock tube valve. This valve is...

Optiparts PFTE Mast Disk for Optimist Mast Step. Teflon mask disk that protects the Optimist mast and mast cup against wear and tear. Specifications Disk diameter: 46 mm Disk thickness: 1 mm

The Optimist X-gripped Colour Series Yellow edition.  A 20 mm black anodised aluminium 60 cm tiller extension for the Optimist. Fitted with yellow x-gripped heat-shrinkable tubing and a releasable joint with rope core. Specifications Colour:...

The Optimist X-gripped Colour Series Green edition. A 20 mm black anodised aluminium 60 cm tiller extension for the Optimist. Fitted with green x-gripped heat-shrinkable tubing and a releasable joint with rope core. Specifications Colour:...

Heavy-duty rubber corner protectors for Optimist with self-adhesive backing. These can be used on the bow only or on all 4 corners. Features Special pre-shaped rubber profile This is not a flat piece of thin rubber Specification Number of pieces: 2

The new Laser trolley side support from Windesign Sailing has a better fit in the Laser gunwale and is much stronger. This product is compatible with Laser® but is not an original Laser® product.Laser® is a registered trademark of Velum...

The most popular round type step for the Optimist dinghy. This Optimist maststep has an oval cup, which allows the mast to tilt forward when going downwind. Different mast rakes can easily be repeated using the scale on the base. Separately, a mast step...

This mast sleeve is fitted around the mast at deck level and protects the mast from wear. Optimist mast sleeve as supplied with Black gold masts. Mounting the sleeve You will notice the sleeve is slightly smaller than the mast. To mount the sleeve, you...

Optiparts Optimist Blackmax Racing Sprit End - Black - 29mm Specifications Colour: Black Number of ends: 2 Diameter: 29 mm

Optimist deck collar with an oval and tapered inner diameter. The oval inner diameter allows the maximum fore/aft play and minimum side play. The EX1210 has a separate sleeve that is fitted around the mast at deck level and protects the mast from wear...

Optimist sprit ends for 27 mm racing sprits. Sold per pair. Specifications Number of ends: 2 Diameter: 27 mm

Optiparts Optimist Outboard End for 40 mm Racing Boom (EX940). All boom end fittings are made of high-quality glass fibre-filled nylon. Features High-quality Diameters given are outside tube diameters Specification Material: High-quality glass...

Optiparts Inboard Boom End for the 40 mm Optimist racing boom (EX940). All boom end fittings are made of high-quality glass fibre-filled nylon and have a firm grip around the mast. Features Ensures that the mast and boom turn together Diameters...

The School Optimist spar set is like the upgraded school set, but is fitted with a stainless steel halyard and downhaul cleat, and the sprit has no chafe protection tube. Set Includes EX1010 Optimist SCHOOL mast EX1030 Optimist SCHOOL...

The Optiparts Optimist School Sprit 25 mm has no chafe protection tube and is the direct replacement for the Oppie Training Sprit. Specification Diameter: 25 mm

Supplied as a set with a Sail sleeve mast, long mast extender and mini boom, with boom bumper head protector. The Trisail can also be used with a regular sleeve mast and boom with the addition of a 40 cm mast extender. The Optimist Trisail is half the...

This Optiparts Optimist Tri Sail White is half the size of a normal Optimist sail. Now even the smallest helmsman can continue sailing in heavy wind. Features Very easy to handle Can be used with a regular sleeve mast and boom, with the addition of a 40...

The Optiparts Optimist Sail with sleeve pocket is ideal for sailing schools. A sleeve pocket for the Optimist mast at the luff with a cutout for the sprit halyard block. Features High-quality 100% dacron sailcloth Does not have any sail batten, and each...

Optimist club racing sail made of strong 3.8 oz. high-quality 100% dacron sailcloth. Features High-quality 100% dacron sailcloth 6 panels with nickel-plated eyes Heavily reinforced corners Built to give many years of useful service in learn to sail...

Made from stainless steel 316 fixed base plate to mount a mainsheet block in the Optimist. Specifications Material: 316 Stainless steel

The Optimist One Design Racing foils from Optiparts are built according to the new class rules. Class rules have standardized Optimist daggerboard and rudder: size, shape, epoxy, foam, and fiberglass. Both Optimist rudder and daggerboard are made to the...

The traditional blow-molded Optimist hand bailer for your dinghy. Features Large hand bailer Strong construction and a large handle Fits perfectly into the corners of the IOD’95 hull Weighs only 210 grams Now available in Red and Green for port...

The traditional blow-molded Optimist hand bailer for your dinghy. Fits perfectly to the corners of the IOD’95 Optimist hull. Specifications Colour: Green Capacity: 3.5 L

Gold trim strip for Optimist as used on the Optiparts black gold booms Features Text printed on transparent polyester For accurate sail trim Used on Optiparts Blackgold boom Specifications Colour: Gold Length: 16 cm

Optiparts Measurement Band Sticker for Optimist Silver Spars. Specification Colour: Blue

The only perfect rudder fittings for the Optimist. Used on all top racing Optimists. (According to I.O.D.A. class rules) These stainless steel rudder fittings are available as a set or separately. Specifications Pin diameter: 6 mm Thickness: Up to 15...

Optiparts standard aluminium Optimist tiller extension with rubber joint and 16 mm golf grip. Features Silver anodized Suitable for racing and school events Specifications Length: 60 cm Weight: 140 g

Optiparts EX2154 end of boom mainsheet block with becket for Laser and ILCA all models - Schools or Club version. Fitting Instructions  Drill out old rivets to remove the boom eye and replace using 4.8mm x 12mm Stainless...

Optiparts Classic Traveller Block with Sister Hook for Laser - Large Classic Laser® and ILCA® traveler block. Plain bearing. Used in combination with the EX2156 small traveler block. This product is compatible with Laser® or ILCA® but is...

Optiparts Optimist Vectran Line Mini Reel - 16m Features Constructed in such a way as to facilitate easy splicing 3 mm Vectran without cover with UV protective coating Splicing needle (fid) available separately Specifications Diameter: 3 mm Length: 16...

The Optimist buoyancy bags from Optiparts are made of polyurethane-coated nylon and are about half the weight and significantly stronger than buoyancy bags made of PVC or PVC-coated nylon. Some bags are available with a twist-lock tube valve. This valve...

Aluminium tiller complete with deluxe aluminium tiller extension (releasable joint/swivel with rope core and new grip). Features Tiller extension comes with a soft grip handle Suitable for all Optimist sailing dinghies Specifications Material:...

The Optimist storage bag contains pockets to hold the sail, boom, mast, and sprit altogether in one easy-to-manage bag. Features 2 Straps for bundling to create a compact package Name tag pocket and detachable, and adjustable carrying...

The Optiparts Optimist Economy Top Cover is the best value top cover - still made with the strong, long-lasting materials. Features Low cost optimist top cover 100% water resistant but not breathable Specifications Material: 600D PVC coated...

Breathable Optimist top cover made of Moistureguard 2000, a heavy-duty 900D polyester with a polyurethane membrane, which has excellent breathability and is fairly water-resistant. Features Cover can be tented by storing the spars under the cover inside...