Optimist Dinghy Parts

The Optiparts Blackgold Masts 45 mm are the strongest Optimist Masts available on the market! The Blackgold has been chosen as the official charter rig for the 2004 I.O.D.A. World, European, Asian and Oceanian Championships, which is easy to see why. The...

The Mk3 set is less stiff than the Optiparts Black Gold Spars and is suitable for lighter sailors (up to 45 kg). Heavier sailors should consider using Blackgold or Optimax spars. Set Contains 1 x Optimax MK3 mast 1 x Optimax MK4 boom (45 mm) 1 x Optimax...

There is no equal to the Optiparts BLACKGOLD™ Optimist spar sets. This medium selection will suit sailors of all weights Features All black fittings Hard anodized cleats Black sprit chafe guard Captive eye straps on the boom Halyard cleat with...

The Optimax Mk3 Racing Boom is lightweight and flexible, a fully rigged 40 mm racing boom that is mainly suitable for sailors below 35 kg Features High-grade alloy, dark grey anodized Glass fibre-filled nylon in- and outboard end fittings Glass...

High performance, fully rigged  Optimax OX35 Boom suitable for sailor above 45kg - A lightweight yet ultra stiff and powerful 48 mm racing boom which is mainly suitable for the more experienced, heavier weight sailors This boom comes with an...

The Optiparts Optimist Training School Boom EX1030 has blue nylon in and outboard end fittings, a nylon outhaul cleat and nylon fittings for mainsheet and downhaul attachment. Not suitable for official racing events. Specifications Diameter: 32 mm

Lightweight aluminium trolley for the Laser® Pico. Spring locking quick release of all parts allows the trolley to be disassembled in a matter of seconds for storage and travel. The frame has welded joints and is anodized to prevent corrosion. This...

Optimist 48L Blue Buoyancy Bag with twist lock tube and valve. The 48-liter buoyancy bags are slightly heavier than the 43-liter buoyancy bags, but tend to leave a lot less water in the boat after a capsize Optimist buoyancy bags from Optiparts are made...

Boom button for the Silver and School booms from Optiparts.

These Optimist buoyancy bags are made of polyurethane-coated nylon and are about half the weight and significantly stronger than buoyancy bags made of PVC or PVC-coated nylon. Some buoyancy bags are available with a twist-lock tube valve. This valve is...

Optiparts PFTE Mast Disk for Optimist Mast Step. Teflon mask disk that protects the Optimist mast and mast cup against wear and tear. Specifications Disk diameter: 46 mm Disk thickness: 1 mm

The Optimist X-gripped Colour Series Yellow edition.  A 20 mm black anodised aluminium 60 cm tiller extension for the Optimist. Fitted with yellow x-gripped heat-shrinkable tubing and a releasable joint with rope core. Specifications Colour:...

The Optimist X-gripped Colour Series Red edition. A 20 mm black anodised aluminium 60 cm tiller extension for the Optimist. Fitted with red x-gripped heat-shrinkable tubing and a releasable joint with rope core. Specifications Colour: Red Diameter: 20...

The Optimist X-gripped Colour Series Green edition. A 20 mm black anodised aluminium 60 cm tiller extension for the Optimist. Fitted with green x-gripped heat-shrinkable tubing and a releasable joint with rope core. Specifications Colour:...

The Optimist X-gripped Colour Series Blue edition. A 20 mm black anodised aluminium 60 cm tiller extension for the Optimist. Fitted with blue x-gripped heat-shrinkable tubing and a releasable joint with rope core. Specifications Colour: Blue Diameter:...

The Optimist X-gripped Colour Series “Doppio” edition.  A 20 mm black anodised aluminium 60 cm tiller extension for the Optimist. Fitted with a special x-gripped heat shrinkable tubing, called “Doppio” and a releasable joint...

The Optimist X-gripped Colour Series Black edition. A 20 mm black anodised aluminium 60 cm tiller extension for the Optimist. Fitted with black x-gripped heat-shrinkable tubing and a releasable joint with rope core. Specifications Colour:...

Deluxe Jamaica special Optimist tiller extension, black anodized aluminium with a releasable rubber joint/swivel and long multi coloured foam grip. The joint incorporates a fibre core molded up in the center. This fibre core will avoid complete...

Heavy-duty rubber corner protectors for Optimist with self-adhesive backing. These can be used on the bow only or on all 4 corners. Features Special pre-shaped rubber profile This is not a flat piece of thin rubber Specification Number of pieces: 2

Optimist upgraded rigging pack for School spar sets. Contains Halyard Control lines Bridle with ring

Optimist mast extender 40 cm to be used with Optimist sleeve mast. The Optimist mast extender is available as a separate item for the Sleeve School mast. This mast extender can be dropped on the top of the Optimist mast and moves the sail up to create...

The new Laser trolley side support from Windesign Sailing has a better fit in the Laser gunwale and is much stronger. This product is compatible with Laser® but is not an original Laser® product.Laser® is a registered trademark of Velum...

The most popular round type step for the Optimist dinghy. This Optimist maststep has an oval cup, which allows the mast to tilt forward when going downwind. Different mast rakes can easily be repeated using the scale on the base. Separately, a mast step...

This mast sleeve is fitted around the mast at deck level and protects the mast from wear. Optimist mast sleeve as supplied with Black gold masts. Mounting the sleeve You will notice the sleeve is slightly smaller than the mast. To mount the sleeve, you...

Optiparts Optimist Blackmax Racing Sprit End - Black - 29mm Specifications Colour: Black Number of ends: 2 Diameter: 29 mm

Optimist deck collar with an oval and tapered inner diameter. The oval inner diameter allows the maximum fore/aft play and minimum side play. The EX1210 has a separate sleeve that is fitted around the mast at deck level and protects the mast from wear...

Optimist sprit ends for 27 mm racing sprits. Sold per pair. Specifications Number of ends: 2 Diameter: 27 mm

Suitable for racing, this Optiparts Optimist Blackgold Mast Rigging Set. Set Contains EX1348 – Halyard system with Windesign low friction ring EX1243 – Wind indicator EX1338 – Top pins EX1354 – Sprit halyard handle EX1211...

Optiparts Optimist Outboard End for 40 mm Racing Boom (EX940). All boom end fittings are made of high-quality glass fibre-filled nylon. Features High-quality Diameters given are outside tube diameters Specification Material: High-quality glass...

Optiparts Inboard Boom End for the 40 mm Optimist racing boom (EX940). All boom end fittings are made of high-quality glass fibre-filled nylon and have a firm grip around the mast. Features Ensures that the mast and boom turn together Diameters...

The School Optimist spar set is like the upgraded school set but is fitted with stainless steel halyard and downhaul cleat and the sprit has no chafe protection tube. Set Includes EX1010 Optimist SCHOOL mast EX1030 Optimist SCHOOL...

The Optimist Training Mast 45 mm from Optiparts is fitted with stainless steel halyard and downhaul cleat. Not suitable for official racing events. Specifications Diameter: 45 mm Technical File Instruction Manual

The Optiparts Optimist School Sprit 25 mm has no chafe protection tube and is the direct replacement for the Oppie Training Sprit. Specifications Diameter: 25 mm

  Supplied as a set with a Sail sleeve mast, long mast extender and mini boom, with boom bumper head protector. The Trisail can also be used with a regular sleeve mast and boom with the addition of a 40 cm mast extender. The Optimist Trisail is half...

This Optiparts Optimist Tri Sail White is half the size of a normal Optimist sail. Now even the smallest helmsman can continue sailing in heavy wind. Features Very easy to handle Can be used with a regular sleeve mast and boom with the addition of a...

The Optiparts Optimist Sail with sleeve pocket is ideal for sailing schools. A sleeve pocket for the Optimist mast at the luff with a cut out for the sprit halyard block. Features High quality 100% dacron sailcloth Does not have any sailbattens and each...

Optimist club racing sail made of strong 3.8 oz. high quality 100% dacron sailcloth. Features High quality 100% dacron sailcloth 6 panels with nickel plated eyes Heavily reinforced corners Built to give many years of useful service in learn to sail...

Made from stainless steel 316 fixed base plate to mount a mainsheet block in the Optimist. Specifications Material: 316 Stainless steel

The Optimist One Design Racing foils from Optiparts are built according to the new class rules. Class rules have standardized Optimist daggerboard and rudder: size, shape, epoxy, foam, and fiberglass. Both Optimist rudder and daggerboard are made to the...

The traditional blow-molded Optimist hand bailer for your dinghy. Features Large hand bailer Strong construction and a large handle Fits perfectly into the corners of the IOD’95 hull Weighs only 210 grams Now available in Red and Green for port...