Optimist Dinghy Parts

The traditional blow-molded Optimist hand bailer for your dinghy. Fits perfectly to the corners of the IOD’95 Optimist hull. Specifications Colour: Green Capacity: 3.5 L

Optiparts Optimist Trim Strip - Single - Red Features Text printed on transparent polyester Red trim strip for Optimist as used on the Optiparts silver and school booms Specifications Colour: Red Length: 16 cm

Gold trim strip for Optimist as used on the Optiparts black gold booms Features Text printed on transparent polyester For accurate sail trim Used on Optiparts Blackgold boom Specifications Colour: Gold Length: 16 cm

Optiparts Optimist Pennant Anodised Aluminium Top Pin Holder for Optimist mast, strong and long-lasting. Holds your wind indicator in place atop the mast, made from metal for extra strength. Specifications Material: Anodised aluminium Colour: Gold

Optiparts Measurement Band Sticker for Optimist Silver Spars. Specifications Colour: Blue

Optiparts Optimist Bolts and Nuts for Rudder Fitting. Set Includes 12 bolts and self-locking nuts 6 for mounting the Optimist gudgeons 6 for mounting the rudder clip and rudder pintles

The only perfect rudder fittings for the Optimist. Used on all top racing Optimists. (According to I.O.D.A. class rules) These stainless steel rudder fittings are available as a set or separately. Specifications Pin diameter: 6 mm Thickness: Up to 15...

Optiparts standard aluminium Optimist tiller extension with rubber joint and 16 mm golf grip. Features Silver anodized Suitable for racing and school events Specifications Length: 60 cm Weight: 140 g

Optiparts EX2154 end of boom mainsheet block with becket for Laser and ILCA all models - Schools or Club version. Fitting Instructions  Drill out old rivets to remove the boom eye and replace using 4.8mm x 12mm Stainless...

Features Plain bearing Used in combination with the small traveler block Specifications Size: Large

Features Constructed in such a way to facilitate easy splicing 3 mm vectran without cover with UV protective coating Splicing needle (fid) available separately Specifications Diameter: 3 mm Length: 16 m (52 ft)

The windesign low friction ring spliced with Dyneema to a safety snap shackle. An extra loop is added below the ring for an easy switch between 1:2 and 1:3 mainsheet. Similar to the Optipart Optimist Mainsheet Block extender but this unit comes with...

The Optimist buoyancy bags from Optiparts are made of polyurethane-coated nylon and are about half the weight and significantly stronger than buoyancy bags made of PVC or PVC-coated nylon. Some bags are available with a twist-lock tube valve. This valve...

Aluminium tiller complete with deluxe aluminium tiller extension (releasable joint/swivel with rope core and new grip). Features Tiller extension comes with a soft grip handle Suitable for all Optimist sailing dinghies Specifications Material:...

Fully padded bottom cover for the best protection of your Optimist hull. The padding protects your Optimist from your surroundings (for example, paved surfaces and rough handling). This makes the bottom cover great for sailors who travel frequently. Pull...

The Optimist storage bag contains pockets to hold the sail, boom, mast, and sprit altogether in one easy-to-manage bag. Features 2 Straps for bundling to create a compact package Name tag pocket and detachable, and adjustable carrying...

The Optiparts Optimist Economy Top Cover is the best value top cover - still made with the strong, long-lasting materials. Features Low cost optimist top cover 100% water resistant but not breathable Specifications Material: 600D PVC coated...

Breathable Optimist top cover made of Moistureguard 2000, a heavy-duty 900D polyester with a polyurethane membrane, which has excellent breathability and is fairly water-resistant. Features Cover can be tented by storing the spars under the cover inside...

Features Comes with ratchet control switch to alternate the direction of travel Suitable as a optimist mainsheet block Suitable for mainsheet lines up to 10 mm diameter Specifications Colour: Black Sheave diameter: 57 mm

Optiparts Optimist Trolley Bow Wow Replacement Kit is a unique system to lock the bow to the Optimist trolley with one quick and simple movement. Prevents the hull from sliding off on steep launch ramps. Trolley Bow Wow replacement kit for the...

Optiparts Duralite puncture and temperature-proof dinghy trolley wheels Suitable for 25mm dia. x 75 mm axles Features Diameter: 37 cm Ultra lightweight: 1750 g

The Optiflex-lite trolley wheels are the ultimate in wheel design. Large Optiflex-Lite puncture proof wheels for Optiparts Optimist trolleys - the ultimate in wheel design. Suitable for 25 mm x 75 mm axles. Available at Sailcenter...

An Optipart Trolley Wheel Clip in R-Pin style to secure the trolley wheel onto your Oppie trailer. Specifications Material: Stainless steel Style: R

The Mast Step Plug is made from Delrin and fits onto the bottom of the lower section of the Optimist Mast. This is the low friction version of the standard Heel Plug which is suitable for racing and school masts.

Optimist clamcleat with becket for Optimist halyard on Blackgold mast.

Specifications Ring material: Stainless steel Length: 3 mm

Optiparts Optimist Pins Stop for Optimist spars as used on the Silver and School spars from Optiparts. Specification Colour: Silver

Replacement pin stop as used on the Blackgold mast for Optimist. Provides a more effective Optimist downhaul function for the Blackgold mast. Specifications Material: Aluminium Colour: Black Hole for mounting: 3 mm

Optimist Boom Plug or cap to fit the end of the outboard version of the Optimist Boom Cap fits on the end/outside of the 32 mm boom. Features Diameters given are outside tube diameter A firm grip around the mast ensures that the mast and boom turn...

Optimist Boom Plug or cap to fit the end of the 32 mm Oppie Boom.  This inboard version of the Optimist Boom Cap fits between the mast and boom.  Features Firm grip around the mast Ensures that the mast and boom turn together Diameters given...

Optiparts Optimist Sprit End Plug for Standard - 25mm - Pair Features Suitable for optimist sailboats Specifications Material: Nylon plastic Diameter: 25 mm

Features Nylon sprit adjuster handle with hole for 4 mm rope For easier handling of the halyard Designed for optimist sailing dinghies

The Optimist Mast Top Pins to suit Optiparts Silver Regatta or Blackgold Masts as seen under Optimist Spars and replacements. Features Optiparts' top pins, which do not cut the lines Supplied with racing masts

The stainless steel lock secures your Optimist mast from coming out of its step when the boat is capsized. This mastlock has a rubber insert and should be clamped around the mast just under the deck. We suggest you use the collar in addition to the...

The Optiparts BlackMax Sprit is designed to suit the Optimist Blackgold range of sailing spars for the Optimist sailing dinghy. This is a stronger and 19% stiffer version of the 29 mm Sprit - giving more control over the leech of the sail. Features Made...

The Optimist Blackgold Boom in 40 mm diameter is a slightly lighter version of the Optiparts Boom is made from high-strength aluminium, black anodised finish and comes with cleats and end fittings. For more from the Blackgold Spars range, please see...

The Optiparts Spirit is part of the Silver Regatta range of parts for the Optimist Dinghy Sailboat with 15 cm anti-chafe protection. Holds up the sail and connects it from the mast to the end of the sprit. Specifications Material: Tempered 6082...

The Optiparts Silver Regatta Boom for the Optimist Sailing Dinghy. Designed as a Silver Regatta Boom, which has slightly more strength than your typical Optimist Boom. This lightweight 40 mm Silver Series Boom is much stiffer than the 32 mm School...

The Optiparts Silver Regatta Mast features an aluminium halyard, downhaul cleat and a low-friction wind indicator. Vectran halyard 1.4 mm and 3 mm Dyneema bridle included in rig pack. To suit the Optimist Dinghy Sailboats. The Silver Series Mast is...

Specifications Colour: Black Size: 23.5 cm