Optimist Dinghy Parts

There is no equal to the Optiparts BLACKGOLD™ Optimist spar sets. This medium selection will suit sailors of all weights Features All black fittings Hard anodized cleats Black sprit chafe guard Captive eye straps on the boom Halyard cleat with...

The Optimax Mk3 Racing Boom is lightweight and flexible, fully rigged 40 mm racing boom which is mainly suitable for sailors below 35 kg Features High grade alloy, dark grey anodized Glass fibre filled nylon in- and outboard end fittings Glass fibre...

High performance, fully rigged  Optimax OX35 Boom suitable for sailor above 45kg - A lightweight yet ultra stiff and powerful 48 mm racing boom which is mainly suitable for the more experienced, heavier weight sailors This boom comes with an...

The Optiparts Optimist Training School Boom EX1030 has blue nylon in and outboard end fittings, a nylon outhaul cleat and nylon fittings for mainsheet and downhaul attachment. Not suitable for official racing events. Specifications Diameter: 32 mm

Lightweight aluminium trolley for the Laser® Pico. Spring locking quick release of all parts allows the trolley to be disassembled in a matter of seconds for storage and travel. The frame has welded joints and is anodized to prevent corrosion. This...

Sowester 4mm R-Clip in AIS304 stainless, universally fits most dinghies launching trolleys for wheel retention. Use in conjunction with Sowester Nylon Wheel Washers  Specifications Material: Stainless steel AIS304 Style: R Pack of 2 4mm x...

Optimist 48L Blue Buoyancy Bag with twist lock tube and valve. The 48l  buoyancy bags are slightly heavier than 43 liter buoyancy bags but tend to leave a lot less water in the boat after a capsize Optimist buoyancy bags from Optiparts are made of...

Sowester nylon launching trolley wheel washers suitable for Laser/ ILCA stacking trollies and others dollies or trailers with 25mm axle diameter - Pack of 2  Features  Heavy Duty 27mm Inside diameter to suit 25mm axles 2 Washers required...

Boom button for the Silver and School booms from Optiparts.

These Optimist buoyancy bags are made of polyurethane coated nylon and are about half the weight and significantly stronger than buoyancy bags made of PVC or PVC coated nylon. Some buoyancy bags are available with a twist lock tube valve. This valve is...

Optiparts PFTE Mast Disk for Optimist Mast Step.

The Optimist X-gripped Colour Series Yellow edition. A 20 mm black anodised aluminium 60 cm tiller extension for the Optimist. Fitted with yellow x-gripped heat shrinkable tubing and a releasable joint with rope core. Specifications Colour: Yellow...

The Optimist X-gripped Colour Series Red edition. A 20 mm black anodised aluminium 60 cm tiller extension for the Optimist. Fitted with red x-gripped heat shrinkable tubing and a releasable joint with rope core. Specifications Colour:...

The Optimist X-gripped Colour Series Green edition. A 20 mm black anodised aluminium 60 cm tiller extension for the Optimist. Fitted with green x-gripped heat shrinkable tubing and a releasable joint with rope core. Specifications Colour: Green...

The Optimist X-gripped Colour Series Blue edition. A 20 mm black anodised aluminium 60 cm tiller extension for the Optimist. Fitted with blue x-gripped heat shrinkable tubing and a releasable joint with rope core. Specifications Colour: Blue Diameter:...

The Optimist X-gripped Colour Series “Doppio” edition. A 20 mm black anodised aluminium 60 cm tiller extension for the Optimist. Fitted with a special x-gripped heat shrinkable tubing, called “Doppio” and a releasable joint...

The Optimist X-gripped Colour Series Black edition. A 20 mm black anodised aluminium 60 cm tiller extension for the Optimist. Fitted with black x-gripped heat shrinkable tubing and a releasable joint with rope core. Specifications Colour: Black...

Deluxe Jamaica special Optimist tiller extension, black anodized aluminium with a releasable rubber joint/swivel and long multi coloured foam grip. The joint incorporates a fibre core molded up in the center. This fibre core will avoid complete...

Heavy duty rubber corner protectors for Optimist with self adhensive backing. These can be used on bow only or on all 4 corners. Features Special preshaped rubber profile This is not a flat piece of thin rubber Specifications Number of piece: 2

Optimist mast extender 40 cm to be used with Optimist sleeve mast. The Optimist mast extender is available as a seperate item for the Sleeve School mast. This mast extender can be dropped in the top of the Optimist mast and moves the sail up to create...

The new Laser trolley side support from Windesign Sailing have a better fit in the Laser gunwhale and are much stronger.

The most popular round type maststep for the Optimist dinghy. This Optimist maststep has an oval cup, which allows the mast to tilt forward when going downwind. Different mast rakes can easily be repeated using the scale on the base. Separately a mast...

This mast sleeve is fitted around the mast at deck level and protects the mast from wearing. Optimist mast sleeve as supplied with Blackgold masts. Mounting the sleeve You will notice the sleeve is slightly smaller than the mast. To mount the sleeve you...

Specifications Colour: Black Number of end: 2 Diameter: 29 mm

Optimist deckcollar with an oval and tapered inner diameter. The oval inner diameter allows the maximum fore/aft play and minimum side play. The EX1210 has a seperate sleeve which is fitted around the mast at deck level and protects the mast from...

Specifications Number of end: 2 Diameter: 27 mm

Optiparts Optimist Outboard End for 40 mm Racing Boom (EX940). All boom end fittings are made of high quality glass fibre filled nylon. Features High quality Diameters given are outside tube diameters Specifications Material: High quality glass...

Optiparts Inboard Boom End for the 40 mm Optimist racing boom (EX940). All boom end fittings are made of high quality glass fibre filled nylon and have a firm grip around the mast. Features Ensures that mast and boom turn together Diameters given...

The School Optimist spar set is like the upgraded school set but is fitted with stainless steel halyard and downhaul cleat and the sprit has no chafe protection tube. Set Includes EX1010 Optimist SCHOOL mast EX1030 Optimist SCHOOL...

The Optimist Training Mast 45 mm from Optiparts is fitted with stainless steel halyard and downhaul cleat. Not suitable for official racing events. Specifications Diameter: 45 mm Technical File Instruction Manual

  Supplied as a set with a Sail sleeve mast, long mast extender and mini boom, with boom bumper head protector. The Trisail can also be used with a regular sleeve mast and boom with the addition of a 40 cm mast extender. The Optimist Trisail is half...

This Optiparts Optimist Tri Sail White is half the size of a normal Optimist sail. Now even the smallest helmsman can continue sailing in heavy wind. Features Very easy to handle Can be used with a regular sleeve mast and boom with the addition of a...

The Optiparts Optimist Sail with sleeve pocket is ideal for sailing schools. A sleeve pocket for the Optimist mast at the luff with a cut out for the sprit halyard block. Features High quality 100% dacron sailcloth Does not have any sailbattens and each...

Optimist club racing sail made of strong 3.8 oz. high quality 100% dacron sailcloth. Features High quality 100% dacron sailcloth 6 panels with nickel plated eyes Heavily reinforced corners Built to give many years of useful service in learn to sail...

Made from stainless steel 316 fixed base plate to mount a mainsheet block in the Optimist. Specifications Material: 316 Stainless steel

The Optimist One Design Racing foils from Optiparts are built according to the new class rules. Class rules have standardized Optimist daggerboard and rudder: size, shape, epoxy, foam and fiberglass. Both Optimist rudder and daggerboard are made to...

The traditional blow molded Optimist hand bailer for your dinghy. Fits perfectly to the corners of the IOD’95 Optimist hull. Specifications Colour: Red Capacity: 3.5 L

The traditional blow molded Optimist hand bailer for your dinghy. Fits perfectly to the corners of the IOD’95 Optimist hull. Specifications Colour: Green Capacity: 3.5 L

Features Text printed on transparent polyester Gold trim strip for optimist as used on the Optiparts blackgold booms Specifications Colour: Gold Length: 16 cm

Optiparts Measurement Band Sticker for Optimist Silver Spars. Specifications Colour: Blue