PUMPS & PLUMBING

This all new 24 volt Jabsco Par Max 3 freshwater pump delivers 11 lpm with a pressure cut off of 40psi - Supplied including Jabsco inline pump guard strainer. Features Double-diaphragm design self primes to 1.5 m vertical lift, can run dry without...

Jabsco Plain Shaft Pedestal Mounted Pump - Size 80 (1") - Model 52080-2001 with BSP threaded ports. Features Constructed from marine quality bronze and stainless steel Easy to service and maintain Will tolerate abrasive wear Handles hard and soft solids...

This latest version of the Jabsco Toilet Macerator Pump now has a fully sealed motor and a new, more powerful chopper blade. The sealed motor consists of O-ring sealed endbells, sealed bearings, and a hard, durable powder coating to prevent corrosion...

A robust single diaphragm design pump with run dry capability. Suitable for bilge pumping, shower or sink drain applications and many other uses. Features Flexible installation Compact and simple design No strainer required Filter-less Quiet...

Jabsco is the world’s largest manufacturer of small craft marine toilet systems, and they have applied all their experience to our latest manual toilet, refining the design that is used by nearly all boatbuilders worldwide. For extra safety and...

Replacement Jabsco cam suits Jabsco 080 (1") impeller pumps. Dimensions Length: 50mm  Width: 51mm Replacement Jabsco cam suits Jabsco 080 (1") impeller pumps. Equivalent part numbers Johnson 01-42679 (fits johnson f7b-9)

Jabsco Manual Toilet Pump Cylinder Assembly 29051-2000 for all Jabsco Twist n Lock Toilets. The unit comes with the pump assembly (doesn't include handle) and gaskets. Includes Top Valve Gasket 29042-0000 Base Valve Gasket 29043-0000 The Jabsco Service...

An essential safety component on all inlet and discharge plumbing of toilets installed below the static or heeled waterline. 29015-1000 Replacement valve. Only available in Europe. Features Molded in tough, corrosion-proof plastic Internal valve avoids...

Robust Y-Valve for use in toilet applications. Allows waste to be pumped overboard or into a holding tank. Specification Weight: 0.2 kg

The Flexible Impeller Removal Tool is the easiest way to remove impellers, especially when the pump is mounted in tight and cramped conditions. Features Removes the risk of expensive damage to the pump Simple, three stage operation easily removes the...

Seal Assembly to suit all Jabsco Manual Toilets from 2007 onwards. Also suits the Twist and Lock Toilets from 2007 onwards. Use For 29090-3 and 29120-3 series toilets Specification Weight: 0.05 kg

This new range Jabsco Par Max 2 is  multi-outlet water pressure pump serving one to three  1/2"(12 mm) outlets at a pressure of 35 psi. Includes inline strainers. Features Double-diaphragm design self primes to 1.5 m vertical lift, can run dry...

Suits all Jabsco Twist n Lock Toilets. Valve cover assembly to suit all of Jabsco Manual Toilets. For 29090 & 29120 series toilets. Specification Weight: 0.30 kg The Jabsco Service Kit includes Handle (1) Seal Housing Assembly (from 2008) (1) Top...

Nitrile Use for diesel transfer Specifications Impeller material: Nitrile Drive type: Double flat Number of blades: 8 Diameter: 2 9/16" (65 mm) Width: 2" (51 mm) Shaft diameter: 5/8" (16 mm) Weight: 0.10 kg

The Amazon range of pumps is primarily designed to evacuate standing bilge water. Actual performance varies according to the individual installation and the pumping rate of the user. The Amazon Universal and Warrior models are also suitable for...

Jabsco Amazon Warrior pump with 38mm hose outlet. The Jabsco Amazon Warrior bulkhead/deck mounted manual pump has a flow rate up to 135 LPM with ports to suit 38 mm ID hose. Made from robust alloy and featuring twin diaphragms the Jabsco Amazon Warrior...

Compatible Brands & Part Number Replacment Jabsco belt kit: 58542-1000 Suit Jabsco Lite flush Toilets Part No: 58500-1012 58500-1024 Kit Includes Drive Belt

Jabsco Utility Pump Handy Boy is a slightly larger version of the Little Pal Pump. This is a very versatile pump with many useful applications, include bilge pumping, oil draining, diesel fuel transfer and other liquid transfer applications. Long life...

Jabsco 37072-0092 waste motor and pump assembly to suit Jabsco Quiet Flush & DS Toilets in 12V. Features Compatible Brands & Part Numbers Genuine Jabsco Spares 12v Volt Suits with Jabsco 12volt  Toilet Series 37045, 37245, 37055, 37255,...

Jabsco 37072-0094 waste motor and pump assembly to suit Jabsco Quiet Flush & DS Toilets in 24V. Features Compatible Brands & Part Numbers Genuine Jabsco Spares 24V Volt Suits with Jabsco 12volt  Toilet Series 37045, 37245, 37055, 37255,...

Self-priming, easy-to-maintain hand pump that can be used in any position. A good bailing out pump. Specifications Output per stroke: 0.75L Stroke: 480 mm Minimum dimensions: 630mm

Inlet strainer protects all electric diaphragm pumps. Features Transparent housing allows instant inspection Prevents unnecessary pump breakdowns caused by particles in the water Screw off top allows quick in-place cleaning and removal of debris 40 mesh...

Inlet strainer protects all electric diaphragm pumps. Features Transparent housing allows instant inspection Prevents unnecessary pump breakdowns caused by particles in the water Screw off top allows quick in-place cleaning and removal of debris 40 mesh...

These Jabsco Ports Kits 30651-1000 allow Jabsco Par-Max 2.9, Par-Max 3, Par-Max 4, Par-Max 5 and Jabsco Acumilator Tanks to adapt to different sizes of hoses and plumbing. This Jabsco Port has a right angled bend, 13mm hosetail and a simple snap on...

Service Kit to suit Jabsco Macerator Pumps 15890-2092 & 15890-2094 In the Pack (2) Bolt, short - See Bolt Kit (2) Bolt, long - See Bolt Kit (1) Macerator Housing - 18594-1000 (1) Chopper Plate with Locknut - 37056-2000 (1) Wearplate, large -...

Valve Set to suit Jabsco 37202 Series diahpram pumps. Compatible Brands & Part Numbers: Genuine Jabsco Spares - 30005-0000

Features 316 stainless steel deck fillers with key Used for water Specification Hose Diameter: 38 mm / 1.5" Dimensions H: 84 mm H1: 76 mm H2: 20 mm D: 75 mm D1: 45 mm

Robust Y-Valve for use in toilet applications. Allows waste to be pumped overboard or into a holding tank. Features Waste and corrosion-resistant construction throughout Rotating ports allow for variable routing of hoses onto the valve Can be operated...

Spare rubber diaphragm to suit Plastimo Bilge Pumps Model: PUMP 925C PUMP 1038C PUMP 925 PUMP 1038

Sanitary EPDM Used for elevated temperature hygienic applications to 185 degree F (85 degree C). EPDM is compatible with some ketone solvents. Specifications Impeller material: Sanitary EPDM Insert material: Plastic epoxy Drive type: Double flat...

Endcover Plate to suit Jabsco 040 series (3/4") Impeller Pumps. Dimensions Diameter: 85mm Hole: 6 

The Pumpgard protects manual or electric toilets from pump malfunctions caused by debris. Features Transparent housing allows instant inspection Prevents unnecessary pump breakdowns caused by particles in the water Screw-off top allows quick in-place...

Neoprene Standard impeller material used in most flexible impeller pumps. It offers a wide range of chemical resistant properties. Specifications Impeller material: Neoprene Insert material: Brass Drive type: Spline Drive size: 7 Number of blades:...

A replacement Jabsco Field Coil  for the Jabsco Clutch Pumps series 50080, 50200 and 50270 Specification Weight: 1.05 kg

Jabsco regular size replacement toilet seat and lid set. Compatible Brands & Part Numbers: Part no 29127-1000 to suit Jabsco manual toilet - Includes hinges and fittings

Anti-siphon safety devices for all marine toilets installed below the vessel’s static or heeled waterline. Simple valve system ensures that water cannot siphon over pipe loops. An essential safety component on all inlet and discharge plumbing of...

This Plastimo 11724 is a high capacity, double action hand pump, ideal for bilge and waste water. It is rugged and corrosion resistant. The pump is equipped with 220° swivel, outlet elbows allowing for multiple mounting positions and...

The Jabsco Bilge Strainer is an inline filter that stops debris from entering the pump and jamming the action. This bilge pump filter connects onto 19 mm hose before the pump inlet and is recommended for all manual pumps. Stop bilge debris from blocking...

The Jabsco HotShot Heavy Duty range is the latest product release from Jabsco with improved reliability and performance, this HD4 12 volt model is a robust, high-flow, high-pressure diaphragm pump delivering 15.5 lpm at a powerful 60psi. Includes a...

Jabsco gear and belt kit 58541-1000 for Jabsco Lite flush Toilets Part No 58500-1012 and 58500-1024. Specification Weight: 0.10 kg Kit Includes Drive Belt Upper Gear Lower Gear Circlips (2)