PUMPS & PLUMBING

Nuova Rade Water Deck Filler with Housing for 38mm hose connection.Deckfill incorporated in recess box and comes with cover.    Mounting Dimensions  

The choice of a nable depends on several criteria: Its function water, gasoline, diesel or black water The diameter of the pipe to be connected (Ø 38, 51 mm...) The material of the bridge and therefore of the sand Its robustness and...

Rule has developed a family of compact combination submersible and in-line pumps and portable pump kits designed for a wide variety of uses, both onboard and ashore. There are four models in the Slimline Series which include strainers for use in...

Rule 500 Shower Pump Kit 12V No 97A A ready to go and compact shower drain system. Automatically turns on after the water starts, and shuts off when the water is removed. Activated by a Rule-A-Matic float switch and powered by a Rule 500 Pump...

Rigorous engineering and testing helped generate this new series of Rule automatic shower and sink drain systems. Rule's products are tested to the highest standard, providing better efficiency for the toughest applications. The new Rule shower drain...

High quality, stainless steel Wema fuel and water tank senders with 1 1/4" BSP thread (S3) and European 0-190 ohm resistance.  Length 60cm. Over the years Wema S3 Tank Senders have been improved with advances in reed switch technology, allowing them...

Allows valve to be mounted behind a bulkhead with the handle on the outside. Jabsco Handle Extension Spacer for 45490-1000 'Y' Valve. Features Waste and corrosion-resistant construction throughout Rotating ports allow for variable routing of hoses onto...

Genuine Jabsco 14281-0001 spare replacement Impeller in neoprene for fresh and salt water use. Neoprene Material Use for fresh and salt water Best for engine cooling Specifications Impeller material: Nitrile Insert material: Plastic Drive type: Double...

Nitrile Recommended for a wide range of oils, oil and water emulsions, diesel fuel, lower fraction hydrocarbons, kerosene, lubricating and machine cutting oil. Specifications Impeller material: Nitrile Insert material: Brass Drive type: Spline Drive...

Jabsco 1.5" 38 mm bronze pump, 200 size, foot-mounted with BSP threaded ports available in 12 V DC and single pulley. The Jabsco Jabsco 1.5" Magnetic Clutch Pumps can output 195 litres per minute and is suitable as a heavy duty bilge and deck wash pump...

Genuine Jabsco spares - Bearing SP2601-0468

Genuine Jabsco Spares  -  Bowl Mounting Kit contains bowl o-ring, nuts, bolts, washers and bolt caps.

Specification Weight: 0.14 kg The Jabsco Electric Toilet Service Kit 29101-0000 includes (1) Slinger (small) (2) Seal (2) Impeller (2) Gasket (paper) (1) Mounting Screw (PAR) (1) O-Ring (1) Screw (Control Knob) (1) Screw (Flush Pump Cover) (1) Flush...

Jabsco Engine Cooling Pump 23430-1301. Flange mount - Size 80 (1.25"). Specifications Pump size: 80 Mount type: Flange Port type: Hose Port size: 1.25" (32 mm) Weight: 2.63 kg Jabsco Available Spares Service Kits and Common Parts Service Kit -...

The Flexible Impeller Removal Tool is the easiest way to remove impellers, especially when the pump is mounted in tight and cramped conditions. Features Removes the risk of expensive damage to the pump Simple, three stage operation easily removes the...

The Flexible Impeller Removal Tool is the easiest way to remove impellers, especially when the pump is mounted in tight and cramped conditions. Features Removes the risk of expensive damage to the pump Simple, three stage operation easily removes...

Genuine Jabsco Spares - Replacement pump lip seal.

Jabsco’s updated and improved lineup of freshwater supply pumps are designed to provide years of exceptional service in applications both large and small. HD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast...

Jabsco Seal Kit 28331-0103B used as a shaft seal on Jabsco  bronze Impeller pumps.

Jabsco Ceramic Seal Assembly SP6080-08 - Genuine Jabsco spares. Fits these Jabsco Pump models 22740-0151 (Obsolete) 22300-05 (Obsolete) Others Please note the 'B' at the end of the Part No signifies the packaging type - Box. Other variants may exist...

Jabsco's reknowned toilet with regular sized bowl and soft close seat and lid  - a luxury in a moving boat. Jabsco is the world’s largest manufacturer of small craft marine toilet systems, and they have applied all their experience into...

Jabsco 1 1/2" Self Priming Utility pump providing up to 80lpm and powererd by a 230v AC single phase, continously rated motor. Features Rapid self-priming up to 3 metres vertical lift Handles hard and soft solids up to 8mm in size Can pump up to 90%...

The Jabsco Utility 3000 24v electric pump is a continuous rated, heavy duty impeller pump, ideal for bilge, deck wash and general purpose use, Fitted with a nitrile impeller suitable for oil contaminated water or oil based products ( Check suitability of...

Nuova Rade Fuel Deck Filler with housing for 38mm hose connection.Deckfill incorporated in recess box and comes with cover designed with label 'Fuel'.

Rule has developed a family of compact combination submersible and in-line pumps and portable pump kits designed for a wide variety of uses, both onboard and ashore. There are four models in the Slimline Series which include strainers for use in...

A portable pumping kit suitable for diesel, fresh and salt water.  Quick diesel transfer with no spillage. Water transfer, deck shower, or deck wash. Kit includes A Rule Inline Pump 12v 280 Plus  Spray nozzle 4m cable with battery clips 4m...

Description Experience unparalleled clarity and durability with our Clear PVC Hose, measuring 8mm in inner diameter and 11mm in outer diameter. This hose is designed for a wide array of applications where visibility of fluid flow is crucial or where a...

Neoprene Neoprene use for oil/water transfer Specifications Impeller material: Neoprene Insert material: Brass Drive type: Flat Drive size: 4 Number of blades: 6 Diameter: 1 1/4" (32 mm) Width: 15/32" (12 mm) Shaft diameter: 5/16" (8 mm) Weight: 0.01...

Robust Y-Valve for use in toilet applications. Allows waste to be pumped overboard or into a holding tank. Features Waste and corrosion-resistant construction throughout Rotating ports allow for variable routing of hoses onto the valve Can be operated...

Jabsco 12V replacement motor to suit Jabsco Quiet Flush Electric Marine Toilets. Suits these models 37045-3092 QUIET FLUSH ELECTRIC TOILET Fresh water flush 37045-4092 QUIET FLUSH ELECTRIC TOILET Fresh water flush 37045-4192 QUIET FLUSH ELECTRIC TOILET...

Neoprene Use for oil/water transfer Specifications Impeller material: Neoprene Insert material: Brass Drive type: Key Drive size: 3 Number of blades: 12 Diameter: 2 9/16" (65 mm) Width: 1 5/8" (41 mm) Shaft diameter: 5/8" (16 mm) Compatible Brands...

Genuine Jabsco pump spares, Bearing SP2600-01

The Jabsco 50 litre Diesel Refuelling Pump in 12 V power supply with a switch and fuse included. Jabsco Sliding Vane Fuel Pumps are designed for refuelling medium sized diesel powered vehicles, plant, aircraft and boats with typical tank sizes of 200 -...

Jabsco Engine Cooling Pump 29440-1001. Flange mount - Size 20 (1"). Features Self priming engine cooling pump Crankshaft-mounted with 25 mm (1") hose ports Specifications Pump size: 20 Mount type: Crank Port type: Hose Port size: 1" (25 mm) Weight: 1...

Jabsco Engine Cooling Pump 21140-2401. Flange mount - Size 80 (1"). Features Self priming engine cooling pump Standard on ford 6-cylinder and some 4-cylinder ‘Dover’ and ‘Dorset’ diesel engines Specifications Pump size:...

Jabsco Engine Cooling Pump 9700-01. Flange mount - Size 80 (1"). Marine engine cooling pump for Hamworthy Perkins Leyland-Thornycroft Specifications Pump size: 80 Mount type: Flanged Drive type: Coupling Port size: 1" (25 mm) Length: 5 3/4" (14.9...

Jabsco 3270-200 engine cooling pump  Size 040 3/4" with flange-mounted with BSP threaded ports - Standard fit on UK-marinised Perkins 4.107 & 4.108 engines. Specifications Connections: ¾” BSP Ports Self Priming Engine...

Inlet strainer protects all electric diaphragm pumps. Features Transparent housing allows instant inspection Prevents unnecessary pump breakdowns caused by particles in the water Screw off top allows quick in-place cleaning and removal of debris 40 mesh...

Robust, high efficiency and flow, long-life circulation pumps. Typical applications include hot and cold water systems, windscreen washing, livewell and bait tank systems and liquid transfer. Features Only one tool needed for all servicing Can be used...

The Jabsco HotShot Heavy Duty range is the latest product release from Jabsco with improved reliability and performance, this HD4 24 volt model is a robust, high-flow, high-pressure diaphragm pump delivering 15.5 lpm at a powerful 60psi. Includes a...