PUMPS & PLUMBING

Robust and reliable bilge or general purpose hand pump manufactured in powder coated alloy. Features Up 85ltr per min out put Takes 38mm hose

The Jabsco Bilge Strainer is an inline filter that stops debris from entering the pump and jamming the action. This bilge pump filter connects onto 19 mm hose before the pump inlet and is recommended for all manual pumps. Stop bilge debris from blocking...

The Jabsco HotShot Heavy Duty range is the latest product release from Jabsco with improved reliability and performance, this HD4 12 volt model is a robust, high-flow, high-pressure diaphragm pump delivering 15.5 lpm at a powerful 60psi. Includes a...

Jabsco gear and belt kit 58541-1000 for Jabsco Lite flush Toilets Part No 58500-1012 and 58500-1024. Specification Weight: 0.10 kg Kit Includes Drive Belt Upper Gear Lower Gear Circlips (2)

Gasket Kit 18596-1000 to fit Jabsco Macerator Pump models 18590 - Genuine Jabsco spares, pack of 2 gaskets. See full Kit J18598-1000  if no stock

Jabsco’s updated and improved lineup of freshwater supply pumps are designed to provide years of exceptional service in applications both large and small. HD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast...

A robust single diaphragm design pump with run dry capability. Suitable for bilge pumping, shower or sink drain applications and many other uses. Features Flexible installation Compact and simple design No strainer required Filter - less Quiet...

Jabsco 58103-1024 Pump Assembly 24V to suit Jabsco Deluxe Flush Series Toilets - High speed non-clogging centrifugal waste macerating pump driven by a powerful 240watt 24 volt permanent magnet motor with ball bearing and robust ceramic  seals...

Maestrini CR Brass Male - Male Reducer. Manufactured in CW602N alloy: a dezincification resistant brass considered equal to bronze in marine corrosion resistance and durability. Products made in this alloy are clearly stamped 'CR'.

Stainless steel key to open Plastimo Deck Fillers with two hole, key points. Dimension Studs at 30mm Centres 

This fitting is required when using Deck Filler Body 47420 for Waste Pump Out.    

Nitrile Use for diesel transfer Specifications Impeller material: Nitrile Insert material: Plastic Drive type: Double flat Number of blades: 12 Diameter: 2 1/4" (57 mm) Width: 1 1/4" (31.5 mm) Shaft diameter: 5/8" (16 mm) Weight: 0.06 kg

The Rule General Purpose Pump is designed for use as a general purpose, washdown or livewell circulation water pump. It has a heavy-duty construction for commercial or pleasure boat use. 1 1/2" (38 mm) inlet and 1 1/2" (38 mm) discharge outlet. The Rule...

Jabsco electric toilet with vitrous china bowl, a compact toilet with motor at the back for a tidy appearance and push button operation for ease of use. Jabsco toilets can be used on inland waterways, rivers, lakes or the sea, and can be installed above...

Smooth flow from faucets and showers, reduce pump cycling, eliminate pulsations and water hammer. Features Can be mounted vertically or horizontally Water is totally separated from air chamber by a rubber bladder Enameled steel vessel with internal...

Jabsco’s updated and improved lineup of freshwater supply pumps are designed to provide years of exceptional service in applications both large and small. HD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast...

Great little pump with many useful applications include bilge pumping, oil draining, diesel fuel transfer, and many other liquid transfer applications. Long life brass cylinders, high-quality oil resistant plungers, intake and discharge caps...

Jabsco 58103-1012 Pump Assembly 12V to suit Jabsco Deluxe Flush Series Toilets - High speed non-clogging centrifugal waste macerating pump driven by a powerful 240watt 12 volt permanent magnet motor with ball bearing and robust ceramic  seals...

Inlet strainer protects all electric diaphragm pumps. Features Transparent housing allows instant inspection Prevents unnecessary pump breakdowns caused by particles in the water Screw off top allows quick in-place cleaning and removal of debris 40 mesh...

Description Experience the versatility and durability of the 8mm Inner Diameter (ID) x 13mm Outer Diameter (OD) Clear PVC Braided Hose, an essential component for a wide range of fluid transfer applications. This hose is crafted to meet the demands of...

Ideal for ski boats and smaller craft, this Rule 500 Submersible Bilge pump has had a whole new design makeover for 2020 and now comes with a threaded hose port for ease of installation and for cleaning and removal.  It also includes a Check Valve...

The Vetus FTR140/19 is a compact 19mm cooling water strainer for confined spaces. Ideal for smaller engines and generator installations. This strainer is for recommended input of 51 l/min. It includes a transparent cover, allowing easy inspection of the...

Jabsco 1.5" 38 mm bronze pump, 200 size, foot-mounted with BSP threaded ports available in 24 V DC and double pulley. The Jabsco 1.5" Magnetic Clutch Pumps can output 195 litres per minute and is suitable as a heavy duty bilge and deck wash pump which...

Neoprene Use for oil/water transfer Specifications Impeller material: Neoprene Drive type: Flat Number of blades: 10 Diameter: 2 1/4" (57 mm) Width: 1 1/4" (32 mm) Shaft diameter: 5/8" (16 mm)

The Jabsco Quick Release Connector provides the perfect installation solution for your washdown hose. The Quick Release installs easily on your boat and allows you to stow your hose out of the way. Never trip on a hose again, this clever design will...

Elevate your marine or RV water system with the Jabsco Double Stack Water System, engineered for high performance and reliability. This robust 24V system delivers an impressive 9 gallons per minute (GPM) flow rate at 40 PSI, ensuring consistent, powerful...

Ideal for a single outlet, this efficient Jabsco Par Max 1 water pressure pump delivers a substantial 3.8 l/pm at up 35 psi. Features Double-diaphragm design Self primes to 1.8m vertical lift Can run dry without damage Economical...

This all new 24 volt Jabsco Par Max 3 freshwater pump delivers 11 lpm with a pressure cut off of 25psi - Supplied including Jabsco inline pump guard strainer. Features Double-diaphragm design self primes to 1.5 m vertical lift, can run dry without...

Jabsco Shaft Seal Assembly 22617-0010 - Ceramic shaft water seal on Jabsco flexible impeller pumps.

Jabsco Snap-In port kits with 1/2" BSP thread. Features Manufactured by Jabsco, a trusted brand Specifically designed for Par-Max pump models starting with 189* and 30* Includes various replacement parts and repair kits Made with high-quality materials...

To fit any Jabsco Twist n Lock Toilet. For 3000 Series only. Specification Weight: 0.16 kg

Equal BHP socket connector in Maestrini CR Brass with female - female ends. Manufactured in CW602N alloy: a dezincification resistant brass considered equal to bronze in marine corrosion resistance and durability. Products made in this alloy are...

Description Introducing the Reinforced Suction Hose 45mm, a versatile and durable solution for your fluid transfer needs. This hose is engineered for medium to heavy-duty applications, making it an essential tool for a wide range of industries...

Roca premium quality, straight deck fillers made of electropolished acid-proof stainless stee, available in 38mm or 50mm hose outlets For optional matching deck filler caps, choose a suitable label from Diesel, Unleaded Petrol, Fresh Water and click...

Water resistant on/off toggle switch for on demand use of Rule Personal Watercraft Pumps.

Rule Automatic RM2000A bilge pump eliminates the need for a separate float switch to activate the pump. Once power is supplied, starting and stopping is completely automatic. The pump checks for water every 2 ½ minutes by turning on for a second...

Jabsco Drill Pumps provide a very versatile means of transferring fluid almost anywhere an electric drill with 1/4" to 3/8" (6 mm to 10 mm) chuck can be operated. They provide easy, powered pumping almost anywhere a hand utility pump might be used...

Jabsco Drill Pumps provide a very versatile means of transferring fluid almost anywhere an electric drill with 1/4" to 3/8" (6 mm to 10 mm) chuck can be operated. They provide easy, powered pumping almost anywhere a hand utility pump might be used...

Replacement Base Assembly for the Jabsco Electric Compact or Regular Toilet series 37010 as seen under related products. Kit Includes Base, Joker Valve and Discharge Port Note: Discharge port supplied with this base does not fit 37075 or 37275 toilets.

Flexible impeller pumps are self-priming and, therefore, ideal for engine cooling, washdown, circulation and many general purposes onboard or dockside. The bronze bodies and stainless steel shafts are well suited for marine environments. They can operate...