RS Ocean Play Boats & Parts

This large blue plastic Laser Boom Fairlead has a stainless steel insert to reduce chafing and allow larger lines with heavier loads. Features Suits the topaz deck fairlead Requires 2 x screw (6 mm x 25 mm) Specifications Material:...

The Laser Pico Vang Plate for the boom has two attachment holes (3/16" x 1/2" rivets sold seperately) and a flat base. For a full Laser Pico Vang kit see code: LS-90507. Pico kicker vang boom plate. Specifications Material: Stainless...

Replacement Rudder Retaining Clip for the Laser Pico range of sailboats. Fits on the gudgeon bracket on transom of dinghy to secure the rudder when in position. Specifications Material: Stainless steel

Transom bung complete unit includes drain socket to screw to hull complete with retaining clip and O-ring.

The Mast Sleeve to suit the Laser Pico is fitted using 3/16" x 5/8" rivets (not included). The Pico Lower Mast Collar attaches to the mast and holds the boom in place, a rivet is used to hold the Pico Lower Mast Collar in Place. Specifications ...

Laser Bailer Bands that are supplied in a pack of four. Having trouble with the Bailer flap lifting back up? Take the bailer off the boat, give it a good clean and check the two bands are still attached. If not this product will help.

12" IRL Sail Letters are designed for racing dinghies more than 3.5m long. This item only includes the individual letters: order 1 x I, 1 x R and 1 x L for a full sail markings set.Boats racing under the Racing Rules of Sailing must display a sail number...

The Pico Toe Strap plate is used to spread the load when attaching toe strap or MK1/MK2 Laser friction pad. Specification Material: Plastic Colour: Blue

Laser Performance Pico/Funboat Upper Mast Base Plug black plastic fits on the bottom of the top mast fixed with 2 x rivets (sold separately). Specifications Material: Plastic Colour: Black

The Laser Block Ratchet Spring is to hold your ratchet upright, the spring is heavy duty. Replacement stainless steel spring to suit stand up blocks such as the Laser Harken 57 mm Carbo Rachet Block (LS-91333). Specifications Size: Large

A rudder ring is a must if you would like to keep your Rudder. It provides a secondary attachment of the rudder to the hull preventing detachment. Make sure you have a rudder ring fitted to save you money in the future.