RS Ocean Play Boats & Parts

RS Laser Bahia mainsail in dacron supplied with battens and sail bag - Orginal Laser Performance version Specification The Laser Bahia mainsail size is 9.50 m2 This is the smaller reefable mainsail Supplied including a long sail bag Material Dacron

Laser Pico Stacking Lauching Trolley - This is one on the most popular launching trollies for Laser Pico, built in galvanised steel, it quickly connects to the Laser Pico Road Trailer and is also stackable up to five boats high, when used in conjuction...

Laser Performance Daggerboard Infused.

This infused GRP centerboard is a multi-boat centerboard, compatible with both the RS Bahia and Vago ( Formerly the Laser Bahia and Laser Vago)

Laser Performance Covers: are made with Marchem Vista fabric, which is strong, durable, and resists water, mildew, UV and tears- arguably the highest quality marine fabric available. are sewn with Renara sewing thread by Gore, the highest quality...

The Bug Yellow Zest Race Mainsail is a popular upgrade from the standard Bug Mainsail and when bought alongside the unique Bug Powercurve Race Mast converts the Bug into the ideal learn to race boat. The Bug Blaze Race Mainsail is a 5.3 m² sail made...

RS Pico / Laser Pico  5.14 m² new design main sail blue and white panels made from Dacron Specifications Colour: Blue/White With Sail Bag

The Laser Gudgeon fits the Laser Pico's and Funboat sail craft constructed in stainless steel. The Laser Gudgeon bolts onto the transom to attach a rudder (sold seperately and comes complete with a spacer and rudder retention spring clip. Specifications ...

Replacement Pico Boom with cleat, outhaul and boom block. Official Pico parts constructed from aluminium. Specifications Material: Aluminium

Holt Laser Pico Lower Mast all fittings included - This is a high quality replica product Specifications Tube material: Aluminium Length - 2.25m Diameter 7cm Weight - 4kgs.

The replacement Laser Pico Bug Rudder Blade attaches to the transom through the rudderhead. Made in aluminium with composite end plugs top and bottom. Specifications Material: Aluminium Length: 81.5cm Width: 19cm 

The Pico Mainsheet Ratchet Block is the direct replacement for the block on your Laser Pico.

The modern Laser Bug or Pico Tiller Extension 710 mm with flexible attachment joint included. For a full Laser Tiller and rudder see code LS-8513.  Specifications Length: 710 mm

Laser Pico rudder strop complete with polyflex spring piece.

Aluminum Pico tiller extension of length 880 mm complete with UJ and rubber non slip covering.

Aluminium tiller extension complete with UJ and rubber non slip covering. Specifications Material: Aluminium Length: 1067 mm

Replacement straps for an aluminium or wood Sunfish tiller.

The official Laser Daggerboard Plate replacement firts Laser Pico's only. Made from black plastic, positioned above the shim and holds the daggerboard in place. Mounted using 6 x screws (M5 X 2 mm) sold seperately. Specifications Material: Plastic...

The Laser Drop Nose Pin is used for the Picos, Vagos and Bahias - Suits the Mast Gate Claw Pin for the Laser Pico and the gooseneck connection for the Laser Vago/Bahia Mast.

The Laser Pico has a simple downhaul system equipped with a self releasing cleat for when you run aground.

Laser Cockpit Drain 92184 - This Laser Drain Bush Set sits at the rear of the cockpit and creates the opening for the self-bailer control rod to operate through. When replacing this item, be sure to bed it with Sikaflex 291    

Laser Performance Pico Race Sail Batten Set.

Clew Hook (Jib Hook) to suit Laser Pico sailing dinghy.

The Laser Lower Vang Block is used for the Laser Pico and Laser Standard rig sailboats on the top section of the Vang which attaches to the eye plate on the boom.Comes with removable pin to attach to eye plate (eye plate LS-91532 sold...

Long rudder pin to attach rudder head to gudgeons.

The Laser XD rudder head pivot bolt is an upgraded large diameter bolt and nylock nut with 20 mm washers. The rudder bolt will hold your rudder blade firmly in place.

The MK1 flat back rubber friction pad for the deck of any Laser dinghy designed as a friction plate to keep the Laser daggerboard in place during sailing.

Top mast collar black plastic fixed with rivets (sold separately). Suitable for Laser 1 and Laser Pico Masts. Specifications Material: Plastic Colour: Black

Plug black plastic fits on the top of the top mast fixed with rivets x 2 (sold seperately).Can also be used as Laser Pico Top Mast Plug. Specifications Material: Plastic Colour: Black

ILCA Laser Traveller Line, made from Marlow Excel Dyneema D12 SK78, the high strength gives the confidence to hike the traveller down hard Features Low friction Lightweight Low water absorption Superb low stretch for ultimate tension on the...

Large original traveller plain bearing block, plastic construction, uses englefield clips or sometimes called kissing clips to connect to the traveller block. Specifications Material: Plastic Colour: Blue Size: Large

The Laser 4" Hatch come with a the lid and surrounding housing. Constructed in white plastic suitable as a Laser Pico Hatch replacement. Specifications Material: Plastic Colour: White Diameter: 4"

Original plastic construction plain bearing block - fitted to boom with 91537 eye strap and attached with rivets.

Original plastic construction plain bearing block - fitted to boom with 91537 eye strap and attached with rivets.

The Laser Pico Gooseneck is the plastic u shaped fitting that attaches the mast to the boom while allowing it swing freely. Comes with U shaped clamp and boom insert. The Pico Gooseneck attaches the boom to the mast via a simple clipping in process.

ILCA Laser Boom Plug - Inboard end to fit  boom to lower mast via gooseneck fitting. Use a 12mm x  Specifications Material: Plastic

Eye Plate to attach the vang system the mast on the Laser Pico. The Vang Mast Plate comes with 3 attachment holes (3/16" x 1/2" rivets sold seperately) and a curved base to fit the Pico Mast. Specifications Material: Stainless steel

Small original traveller plain bearing block, plastic construction, uses englefield clips or sometimes called kissing clips to connect to the traveller block. Specifications Material: Plastic Colour: Blue Size: Small

The ILCA Mega Bolt is the pivot bolt to fit the Rudder Head to the Rudders Plade - Supplied with 20mm Washers