RS Ocean Play Boats & Parts

Harken Carbo Ratchet Blocks allow sailors to hand-hold loaded lines and offer balance between holding power and controlled easing. Harken 57 mm Blocks feature Cam-Lock or U-Lock locking systems to lock the shackle in front or side positions, or swivel to...

RS Pico 1.09 m² rolled job in blue and white made from Dacron including sail bag. Specifications Colour: Blue

The RS Pico Slot Strip for the underside of daggerboard plate and housing. It is a flexible lip that allows the centreboard to be passed through the deck but stops water from rushing back into the cockpit.

The Pico Mainsheet Ratchet Block is the direct replacement for the block on your Laser Pico.

Complete rudder pintle and gidgeon assembly for Fusion Sailboat and also Laser Pico

The modern Laser Bug or Pico Tiller Extension 710 mm with flexible attachment joint included. For a full Laser Tiller and rudder see code LS-8513.  Specifications Length: 710 mm

Ready to go Pico sailing dinghy rope pack including main sheet and jib sheet and all other control lines Lines included Appliation Length/mtr Type Jib Halyard 5 8 Plait P/S (Blue/Black) Mainsheet 10 Marstrand (Blue/Green) Jib Sheet 6 Marstrand...

Laser Pico rudder strop complete with polyflex spring piece.

Aluminum Pico tiller extension of length 880 mm complete with UJ and rubber non slip covering.

Aluminium tiller extension complete with UJ and rubber non slip covering. Specifications Material: Aluminium Length: 1067 mm

Optiparts manufactures a 32 mm aluminium tiller for the Laser dinghy. The tiller has at the outer end a precise molded anodized aluminium insert. The inner end is sealed with a plastic cap. The tiller comes in a Deluxe and a Standard version. The...

Replacement straps for an aluminium or wood Sunfish tiller.

The official Laser Daggerboard Plate replacement firts Laser Pico's only. Made from black plastic, positioned above the shim and holds the daggerboard in place. Mounted using 6 x screws (M5 X 2 mm) sold seperately. Specifications Material: Plastic...

The Laser Drop Nose Pin is used for the Picos, Vagos and Bahias - Suits the Mast Gate Claw Pin for the Laser Pico and the gooseneck connection for the Laser Vago/Bahia Mast.

The Laser Pico has a simple downhaul system equipped with a self releasing cleat for when you run aground.

Laser Cockpit Drain 92184 - This Laser Drain Bush Set sits at the rear of the cockpit and creates the opening for the self-bailer control rod to operate through. When replacing this item, be sure to bed it with Sikaflex 291    

Laser Performance Pico Race Sail Batten Set.

Clew Hook (Jib Hook) to suit Laser Pico sailing dinghy.

High quality HOLT padded centre toestrap to suit RS Pico and Laser Pico . Replaces Laser Performance part no 83112 Mounting screws sold separately M5 X 2 mm pan head. Locator Diagram Centre Toe Strap position as indicated by Part No 83112

The Laser Lower Vang Block is used for the Laser Pico and Laser Standard rig sailboats on the top section of the Vang which attaches to the eye plate on the boom.Comes with removable pin to attach to eye plate (eye plate LS-91532 sold...

ILCA approved, stainless steel gooseneck for ILCA 4, 6 & 7 sailboats - This goodeneck also suits Laser Performance models in Standard, Radial and 4.7 rigs Specifications Material: Stainless steel Fasteners 6 x M4.8 x 12mm Stainless Steel Rivets -...

Medium to heavy weather Laser Mainsheet  made from Rooster Polilite Specification Diameter: 7mm Length: 13.5mtr

Light weather ,high performance mainsheet made from Rooster Polilite Specification Diameter : 6mm Length : 13.5m

Long rudder pin to attach rudder head to gudgeons.

Mast step plate, black plastic large hole to take mast foot, 4 holes to bolt it to the hull. Specifications Material: Plastic Colour: Black

The Laser XD rudder head pivot bolt is an upgraded large diameter bolt and nylock nut with 20 mm washers. The rudder bolt will hold your rudder blade firmly in place.

Upper Rudder Gudgeon for RS Laser Pico, RS Laser and Fusion Dinghy Rudders complete with backing plate, locking clip and retaining circlip on lanyard

Transom drainage flaps for RS laser Pico. Optional Mounting Plate  RS Bahia & Pico Transom Flap, Attachment Plate RS-OPM-HF-501    

Laser Boom Plug - Inboard end to fit  boom to lower mast via gooseneck fitting. Attached with a rivet and made from plastic. Specifications Material: Plastic

The MK1 flat back rubber friction pad for the deck of any Laser dinghy designed as a friction plate to keep the Laser daggerboard in place during sailing.

Lower Rudder Gudgeon for RS Laser Pico, RS Laser and Fusion Dinghy Rudders, complete with backing plate,

High performance Harken boom end, mainsheet block with becket for all rigs ILCA or Laser Dinghies Features ILCA Class Legal High performance Suits all Rigs  Suius Laser XD   

Top mast collar black plastic fixed with rivets (sold separately). Suitable for Laser 1 and Laser Pico Masts. Specifications Material: Plastic Colour: Black

Plug black plastic fits on the top of the top mast fixed with rivets x 2 (sold seperately).Can also be used as Laser Pico Top Mast Plug. Specifications Material: Plastic Colour: Black

Medium to heavy weather Laser Pico Mainsheet made from Rooster Polilite Specification Diameter: 7mm Length: 10m Rooster Polilite Since being used to win the Laser Gold Medal at the Sydney Olympics in 2000 , Rooster's 7mm revolutionary non-twist...

Composite shaped buffer that fits into the stern end of daggerboard casing to protect the hull against any daggerboard impact force should you strike a rock or object

ILCA Laser Traveller Line, made from Marlow Excel Dyneema D12 SK78, the high strength gives the confidence to hike the traveller down hard Features Low friction Lightweight Low water absorption Superb low stretch for ultimate tension on the...

Laser Pico Mast Gate Claw used as a mast gate latch to retain mast, secured with 90658 pin Specifications Material: Nylon Colour: White

The two pieces can be assembled around existing trapeze wires. So there is no need to replace the complete wire in case a handle fails. Specifications Handle type: Trapeze Number of piece: 2

Original plastic construction plain bearing block fitted to boom with 91537 eye strap and attached with rivets. Specifications Material: Plastic Colour: Blue Number of block: Single