Sail Control

The Lewmar 30-48 Gear Spindle Sleeve is an official spare part for the Lewmar Features Official spare part from Lewmar Fits all Lewmar Sailing Winch models from: 30ST - 48ST Lewmar part no: 45000029 Part Diagram The diagram below shows the Lewmar 30ST...

The Lewmar 24-40ST Gear Spindle Sleeve is an official spare part for the Lewmar Features Official spare part from Lewmar Fits all Lewmar Sailing Winch models from: 24ST - 40ST Lewmar part no: 15000378 Part Diagram The diagram below shows the Lewmar...

The Lewmar 16ST Stripper Ring Replacement Kit is a direct official replacement part for the Lewmar 16ST Windlasses. Parts Diagram The Lewmar 16ST Stripper Ring Replacement Kit is part 7 from the diagram below:  

The Lewmar 30-40ST Gear Spindle Replacement is an official spare part for the Lewmar Features Official spare part from Lewmar Fits all Lewmar Sailing Winch models from: 30ST - 40ST Lewmar part no: 48000506 Part Diagram The diagram below shows the...

The Lewmar 15ST - 70ST Winch Collet Replacements are an official spare part for the Lewmar Windlasses range from 15ST EVO series to 70ST EVO series. Come sold as pair Part Diagram The Collets are shown in the image below as part no. 3.

Lewmar 30ST-56ST Winch Top Cap Replacement Kit is an official spare part from Lewmar for use on their sailing winches. Features High strength black nylon. Suits Lewmar 30ST - 56ST winches; older models with 4 hole top

Lewmar Traveller Car Size 1 End Caps sold as a pair with screws included. Features Official replacement part from Lewmar Comes with 4 x installation screws. Lewmar Size 1 Traveller Car

The Lewmar 34ST/40ST Winch Drum Bearing Kit are an official replacement part for Lewmar Winches: 34-40 series.   Parts Diagram The Lewmar 34ST/40ST Drum Bearings are shown as part no. 9 below:  

The Lewmar Manual Recovery Pawl Kit (Fall Safe) suits the V1/V2/V3/Go Series of Lewmar Windlasses. Parts Diagram The Lewmar Manual Recovery Pawl Kit is shown below as part no: 28,12,29,18,33,19 sold together in one pack.  

The Lewmar 48ST Chrome Feeder Arm is an official replacement spare part for the Lewmar 48ST Windlass. Part Diagram The Lewmar 48ST Chrome Feeder Arm is shown as part no. 3 in diagram below:

The Lewmar Winch Replacement Cone is a direct replacement part for the Lewmar V1/V2/V3 Series Windlasses. Parts Diagram The Lewmar Winch Replacement Cone V1/V2/V3 Series is displayed as part no. 15 below:

The Lewmar Winch Service Kit for the Lewmar V1/V2/V3 Series Windlasses. Contains lip seal, bronze bush, seal washer and 2x delrin washers. Parts Diagram The Lewmar Winch Service Kit V1/V2/V3 is comprised of part no: 2, 35 and 3 as shown below.

Lewmar Winch Service Kit 6-43 - Suitable for most Lewmar Winches Sizes 6 to 43. Contents: 4 x Circlips 4 x Pawls 4 x Pawl Springs Lewmar Part No: 19700100

Harken lock-in 10" winch handle in superior chrome finish These robust low-friction ball bearing handles match a wide range of cranking needs for both racers and cruisers. Handles feature a ball bearing grip that efficiently transmits power into the...

Barton PVC winch handle pocket. Manufactured from flexible dip moulded PVC to enable a wide range of handle types tobe stored quickly and securely. Includes draining hole at base   Specification Suits most winch handles  Length 300mm 

Plastimo 26179 PVC Insert for all Plastimo Single Track Spars - Suits models - 406S, 609S & 811S. In the Pack 1 x Single channel OVC Insert 1.5m About the Spars in a Plastimo Furling Systems  For Twin Track Furlers Models - 406-S, 609-S &...

Plastimo 25184 bottom spar to suit Twin Track Plastimo furling systems, models - 406S, 609S & 811S. In the Pack 1 x Single channel alloy spar 2.15m x 31mm dia. About the Spars in a Plastimo Furling Systems  For Twin Track Furlers Models -...

Plastimo 25752 bottom spar to suit single track Plastimo furling systems, models - 406S, 609S & 811S. In the Pack 1 x Single channel alloy spar 1.5m About the Spars in a Plastimo Furling Systems  For Single Track Furlers Models - 406-S, 609-S...

Plastimo 17065 Headsail Slider to suit 406S & 608S furling systems - Suits8mm Track - Sold singularly   Dimensions Length 44mm Width 26mm Track slug 8mm

Plastimo supplementary spar package 26901 to suit Plastimo single headsail furling system models 406S, 609S & 811S, supplied with joiner and screws. About the Spars in a Plastimo Furling Systems  For Single Track Furlers Models - 406-S, 609-S...

Plastimo supplementary spar package 26902 to suit Plastimo twin headsail furling system models 406-T,  609-T & 811-T, supplied with joiner and screws. In the Pack 1 x Twin channel alloy spar 2.25m 1 x Quick-coupling sleeve with separate wire...

Plastimo 559769 Aluminum quick-coupling sleeves and screws. Suits Plastimo Single Track Furling Systems  Model Nos 406S,608S & 810S - Pack of 7 

Barton furling drum 42334 for use on Jibs fitted to dinghies, catamarans and day boats. Use in conjuction with Barton Furling Top Swivel part no 42336.  Suitable sail areas up to 60 sq ft (5.74 sq m) Features For sail areas up to 60 sq ft (5.74 sq...

Barton furling gear top swivel  42336   for use on jibs fitted to Dinghies, Catamarans and day boats. Use in conjuction with  Barton Furling drum part no 42334 for maximum sail area up to 60 sq ft (5.74 sq m) or Barton Furling drum...

Plastimo Halyard Feeder Eye  to suit 609 S - 609 T and 811 S - 811 T reefing systems Specification Fixing plate 45 x 45 mm Halyard Ø 18 mm Drilling 4 x Ø 4.8 mm

Plastimo Halyard Feeder Eye  to suits 406 S and 406 T Furling Systems Specification Fixing plate 42 x 18 mm Halyard Ø 12 mm Drilling 2 x Ø 4 mm

The Plastimo 811- T twin groove, jib reefing system is suitable for boats 8-11m. The drum and halyard swivel are equipped with Torlon and Delrin ball bearings for increased performance and mechanical resistance. 811 model comes as standard with...

The Plastimo 406 jib reefing system is lightweight and sturdy and features all the benefits of larger headsail reefing systems. Includes 2 Delrin twin ball bearing races in both drum and halyard swivel. All components are manufactured from polyamide...

The Plastimo 406 jib reefing system is lightweight and sturdy and features all the benefits of larger headsail reefing systems. Includes 2 Delrin twin ball bearing races in both drum and halyard swivel. All components are manufactured from polyamide...

The Plastimo 406 jib reefing system is lightweight and sturdy and features all the benefits of larger headsail reefing systems. Includes 2 Delrin twin ball bearing races in both drum and halyard swivel. All components are manufactured from polyamide...

The Plastimo 406 jib reefing system is lightweight and sturdy and features all the benefits of larger headsail reefing systems. Includes 2 Delrin twin ball bearing races in both drum and halyard swivel. All components are manufactured from polyamide...

Lewmar winch replacement Main Spindle Sleeve  Part 10 Applications Lewmar Ocean Series 40ST and 46ST Self Tailing Winches  

The Plastimo 609-T Jib Reefing ideal for boats length 6-9 mtr or 20-30ft  This T Series (Twin Luff) is best for the cruiser/racers as the double luff groove allows for efficient and quicker sail change. Supplied complete for forestay length 9...

The EVO Sport complements the EVO Winch range. Best suited for sport boats requiring constant trimming and where weight consideration is a premium. The EVO Sport is also suitable as a mast mounted winch. Features Architecture based on self tailing...

Lewmar 15ST One Speed EVO Self Tailing Winch Chrome Bronze. An evolution of the renowned Lewmar Ocean winch, the EVO® Self-Tailing Winch draws on a wealth of design and manufacturing experience to produce a state-of-the-art winch. With a wide choice...

This Lewmar Lock-in Spares Kit is available  for 8" and 10" handles. Includes Lock-in knob Spring pin Lock-in spring Isolator Lock-in plate

This Lewmar 200mm (8") Locking Winch Handle is made from durable, lightweight alloy. Ball bearings provide maximum efficiency.

Pack of 7 Plastimo 55980 quick-coupling sleeves and screws for connecting twin track furling spars. Suits Plastimo Single Track Furling Systems  Model Nos 406T,608T & 810T - Pack of 7 

The Plastimo 609-T Jib Reefing ideal for boats length 6-9 mtr or 20-30ft  This T Series (Twin Luff) is best for the cruiser/racers as the double luff groove allows for efficient and quicker sail change. Supplied complete for forestay length 8...

A spare battery is recommended for extended sailing and sailboats larger than 45 feet.  The Ewincher2 Battery uses the highest quality materials and is tested to ensure optimal operation and maximum battery life. Ewincher2 electric winch handle...