Sailboat Hardware

Clamcleat CL218 Mk2 side entry cleats are available in port or starbord entry and in silver enamel or anodised Specification

Lewmar rope clutches continue to the most reliable and long lasting clutches available, they feature a unique grip pattern of dominoes that prevent rope fray unlike any other product on the market today. Lewmar's non-cam clutch has a series of smooth,...

Harken replacement traveler kits are the fastest, easiest way to replace an old traveler with one that fits and works correctly. Take the guesswork out of picking the right parts. Kits include car and end controls; purchase track and fasteners separately...

The Lewmar Small Cam Fairleads can be fitted using screws from the existing cam cleat and help retain the line when not jammed in the cleat. Features Black Nylon Easily installed on existing small cam cleats from Lewmar Max 8mm...

The Lewmar Size 2 Ball Loader comes with White Screws and allows you to take off the cars on your Lewmar Size Track without the ball bearings escaping. Specification Product Type: Spares  

Made from state-of-the-art materials developed by the automotive industry and refined for the marine market, Lewmar cleats enhance performance in durability, strength and lubrication. Features Low line entry load High holding load Constant tension...

Lewmar Size 1 Ocean Car Buffer Kit has replacement end caps for the Ocean series of Lewmar Travellers. Comes with screws and everything needed to replace the old unit's buffers.

The Lewmar SZ2 Traveller Track End Caps are the official replacement parts for the SZ2 car tracks from Lewmar. Features Sold as a pair Material: Black nylon Comes complete with fasteners for installation.

Lewmar DC1 Single Rope Clutches have a series of smooth, in-line and parallel rings hinged at the base. The line is run through these rings, which are then tilted by a single connecting lever. When tilted, the rings force the line to snake through...

The Lewmar NTR Mainsheet Car Size 2 comes with everything you need for a complete standard system, excluding the track. Suitable for boats up to 15m (49ft). Features Popular choice for cruising and racing yachts Suitable for 10mm (3/8") control line The...

The KORG18-1 is a low-friction die-cut fairlead with a single wide passage. It allows for supporting very heavy loads with a minimum weight. Features Block machined aluminum Hard anodization with Teflon to limit friction Light and...

The Karver KORG18-2 Deck Organizer is a low-friction fairlead cut with 2 passages of 18mm max line. It supports very heavy loads with a minimum weight. Features Block machined aluminum Hard anodization with Teflon to limit friction Light and compact 2...

The Karver KORG18-3 Deck Organizer is a low-friction fairlead cut with 3 passages of 18mm max line. It supports very heavy loads with minimal weight. Features Block machined aluminum Hard anodization with Teflon to limit friction Light and...

The Karver KORG18-4 Deck Organizer is a low-friction fairlead cut with 4 passages of 18mm max line. It supports very heavy loads with minimal weight. Features Block machined aluminum Hard anodization with Teflon to limit friction Light and...

The Holt Halyard Stopper Black 16 mm is a compact, reliable stopper designed for halyards and control lines up to approximately 12 mm diameter on sailing yachts and dinghies. According to the Holt “Accessories” catalogue, the part number for...

If you’re seeking a reliable fairlead for controlling lines through cam-cleats with minimal fuss, the Nautos Composite Fairlead delivers a smart solution. Designed to suit both the smaller cam-cleat systems and larger versions, this fairlead...

The Nautos Fairlead for Cam Cleat (Black) offers a clean, low-profile fairlead specifically designed to work with Nautos cam-cleats, improving rope entry and alignment, reducing chafe and enhancing reliability on deck. Ideal for Irish sailboats facing...

The Nautos Stanchion Lead is a purpose-built lead block designed for attachment to a 1″ (≈ 25 mm) stanchion, helping direct control lines cleanly with minimum friction. Made with a composite housing and stainless steel components. For Irish...

Holt’s Copper Tacks at ½″ (13 mm) size offer a durable fixed-fastening solution for marine deck fittings, upholstery, trim and other installations where corrosion resistance and aesthetics matter. Made of solid copper, these tacks are...

The Nautos Composite Cam Cleat 91025 is a high-performance, marine-grade cleat designed to hold control lines securely and release them smoothly under load. Thanks to its two rows of high-load ball bearings, this cam cleat minimises friction, allowing...

Features High Resistance Aluminum Anodized Long Durability 3 Row Ball Bearing Specifications Working Load: 320 lbs. Breaking Load: 790 lbs. Distance Cc Mounting Holes:  38Mm ~ 1 1/2" Width: 65 Mm  ~  2 9/16" Height: 30 Mm  ~...

Holt Replacement Cleat Plate Complete for the Laser® hull. Features Holt HT91026 Cleates with Holt HT91182 Wide Angle Fairlead. Supplied assembled and ready to fit to your boat. The base uses the same hole spacing and mounting location as the...

Holt Laser Turbo – XD Powerpack Kit including all the blocks and ropes needed to upgrade your cunningham and outhaul. Cunningham and Outhaul Kit: 1 x Cleat Base With Two Cleats And Over Fairleads 1 x Stainless Steel Block Base With 2 20mm Dynamic...

Wedges fit slots in foil connector. Line up foil holes with connector screw holes. Specifications Length (in): 1 5/8" ( 41.5 mm ) Width (in): 9/32" ( 7 mm ) Fits: MKIV Unit 1

Use with Harken Non-CB Small Boat cars made before 2003.

Harken Midrange Traveler Car End Caps — Supplied as a set of 2 complete with screws and loctite thread lock.

When end controls are not used, add endstops to absorb shock loads. Specifications Length (in): 1 7/8" ( 48 mm ) Width (in): 1 1/4" ( 32 mm ) Weight (oz): .64 oz. ( 18 g ) Fasteners (in): #10 FH in ( 5 mm ) Height (in): 7/8" ( 22 mm ) Use with...

The 16 mm is Harken’s smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system uses stainless steel balls in a captive grooved race and has a 250 lb (113 kg) maximum working load...

The Clamcleat® CL211 Mk2 is a neat, compact alloy cleat with many uses for sailing, kitesurfing, sports equipment and industrial applications. Manufactured from aluminium for light weight and durable performance. Ideal for halyards & control...

Clamcleat® CL222 is an elegant design in aluminium with a silver or hard anodized finish. The rope drops down into the teeth. It can be fitted to all flat and curved surfaces, using rivets, countersunk (flathead) screws, or bolts. CL222 can also be...

The teeth in the CL255 are above the rope, so you lift the rope up to grip in the teeth. When un-cleated, the rope automatically drops away and can run freely, making it ideal for through-deck or through-mast applications. The CL255 is used as part of a...

The becket on the Clamcleat® CL211 MK2/S2 holds the end of the rope under the cleat. Rig for 2:1 advantage without the need for an extra fixing. Ideal for Optimist masts and small dinghy halyards. Also used for rigging sailboat Lazy Jacks...

The White Clamcleat® CL234W makes it simple to hang fenders. It is easy to adjust so your fenders are always positioned correctly. The cleat stays on the rope so nothing gets lost. There are no moving parts and it fits around all sizes of tube or...

The becket holds the end of the rope under the cleat. No need for an extra fixing when rigging for 2:1 advantage. Small, neat and lightweight. The fairlead guides the rope into the teeth and advanced tooth technology holds all types of small rope. The...

The Clamcleat® CL211 Mk2 is a neat, compact alloy cleat with many uses for sailing, kitesurfing, sports equipment and industrial applications. Manufactured from aluminium for light weight and durable performance. Ideal for halyards & control...

With the CL220, the rope drops down into the teeth to give a quick and positive lock that is easy to release. Manufactured from aluminium for lightweight and durable performance. It is available in a silver stove enamel finish for a cost-effective,...

Don't damage your rudder blade! The Clamcleat® CL257 Auto-Release cleat provides the neatest and best solution to the problem of how to lock-down a rudder blade yet allow it to flip-up if it hits the bottom or a solid obstacle in the water. The cleat...

The Clamcleat® CL829-11 is a strong, compact aluminium cleat for tensioning kitesurf brake lines. The position of the cleat on the rope can be adjusted by hand. It is easy to rig and adjust - no tools required. The CL829-11 can be set up on the fifth...

Barton 2-hole fixing Pad Eye manufactured from AISI 304 stainless steel. Featuring a solid stainless steel bar welded for extra security. Specifications Bar dia.: 4mm Height: 16mm Hole Centres: 30mm Weight: 18 g Dimensions: 45 × 15 × 21...

Barton 60304 double fold flat, pad eyes in stainless with dampener pads Specifications Eye Dia: 6mm Overall width: 51mm Overall Length: 100mm Weight: 95 g Dimensions: 98 × 52 × 9 mm Bore Diameter (mm): 6mm Fastenings: 6mm Height of deck when...