Sailboat Hardware

Low-friction carbo air blocks are lightweight, strong, reliable and affordable. Companions to the popular Harken black magic block line, these small, compact blocks have very high working loads for safe, easy trimming. Specifications Sheave diameter: 2...

Low-friction carbo air blocks are lightweight, strong, reliable and affordable. Companions to the popular Harken black magic block line, these small, compact blocks have very high working loads for safe, easy trimming. Specifications Sheave diameter: 2...

Low-friction carbo air blocks are lightweight, strong, reliable and affordable. Companions to the popular Harken black magic block line, these small, compact blocks have very high working loads for safe, easy trimming. Specifications Sheave diameter: 2...

Low-friction carbo air blocks are lightweight, strong, reliable and affordable. Companions to the popular Harken black magic block line, these small, compact blocks have very high working loads for safe, easy trimming. Specifications Sheave diameter: 2...

Ball Bearing Swivel Bases feature dual rows of Delrin ball bearings that swivel freely even under high loads. Bases include stand-up springs and a U-adaptor to accept a variety of appropriate blocks. The low profile 205 is used when installation is at...

Low-friction micro blocks are compact and lightweight. They are ideal for sailboards, smaller dinghies and lightly loaded control lines on boats of all sizes. Specifications Sheave diameter: 7/8" (22 mm) Maximum line diameter: 1/4" (6 mm) Maximum...

Low-friction carbo air blocks are lightweight, strong, reliable and affordable. Companions to the popular Harken black magic block line these small, compact blocks have very high working loads for safe, easy trimming. Specifications Sheave diameter: 1...

The patented T2 Ratchamatic is Harken’s newest block to feature the T2 line’s styling and soft-attachment system. The weight of this high-strength block is only a few ounces. This is thanks to composite fiber-reinforced sideplates,...

The patented T2 Ratchamatic is Harken’s newest block to feature the T2 line’s styling and soft-attachment system. The weight of this high-strength block is only a few ounces. This is thanks to composite fiber-reinforced sideplates,...

High-strength Pivoting Lead Blocks with cams are used for halyard controls on larger keelboats and as “headknockers” on dinghies and beachcats for sheeting directly from the boom. Hole spacing and rivet size are the same as classic models,...

Typically used to replace the ball bearings in 32mm car tracks. These Harken Ball Bearings for 25mm Car Tracks will suit any brand such as Barton, Harken or more.Made from Torlon for extra high loads. Specifications Material: Torlon Diameter: 1/4" (5...

When end controls are not used, add endstops to absorb shock loads. Specifications Fasteners: 5 mm (#10 FH inch) Use with track/rail: 2720 Technical File Installation Sheet

The high-strength composite T2 is the first block with no metal shackles or rivets. It is used for traveler controls, mainsheets and vangs, cascades, bridles, and other systems where small, lightweight blocks are called for. The T2 can be tied, spliced...

The high-strength composite T2 is the first block with no metal shackles or rivets. It is used for traveler controls, mainsheets and vangs, cascades, bridles, and other systems where small, lightweight blocks are called for. The T2 Loop’s on/off...

The high-strength composite T2 is the first block with no metal shackles or rivets. It is used for traveler controls, mainsheets and vangs, cascades, bridles, and other systems where small, lightweight blocks are called for. The T2 can be tied, spliced,...

T2 blocks come in single and double configurations and can be tied, spliced, or lashed to almost anything. T2 doubles feature composite line guides that are integrated into the block head. They prevent the block from capsizing by pushing the lashing line...

The high-strength composite T2 is the first block with no metal shackles or rivets. It is used for traveler controls, mainsheets and vangs, cascades, bridles, and other systems where small, lightweight blocks are called for. The T2 can be tied, spliced,...

Specifications Material: Torlon Diameter: 5/16" (8 mm) Quantity: 25 Weight: 0.35 oz. (9.92 g)

Harken ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Aluminum Cam-Matics are hardcoat-anodized for high-load, high-wear, continuous adjustment applications. Specifications Minimum line diameter: 1/8" (3...

Carbo Ratchets allow sailors to hand-hold loaded lines and offer balance between holding power and controlled easing. Features Glass-filled nylon sideplates: Load-carrying curved bearing races Machined hardkote-anodized aluminum sheaves: Strength...

Carbo Ratchets allow sailors to hand-hold loaded lines and offer balance between holding power and controlled easing. Features Glass-filled nylon sideplates: Load-carrying curved bearing races Machined hardkote-anodized aluminum sheaves: Strength and...

Wedge Kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Specifications Fastener spacing: 1 1/2" (38 mm) Fits cam: 150, 365 Length: 2 9/16" (65 mm) Width: 1 1/4"...

Springs support blocks on padeyes, eyestraps, bases, and traveler cars, and prevent blocks from hitting the deck. Specifications A: 2" (51 mm) B: 7/8" (22 mm) Weight: 0.32 oz. (9.1 g)

Low-friction Bullet Blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Specifications Sheave diameter: 1...

Low-friction Bullet Blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Wire Bullet blocks use roller...

Low-friction Bullet Blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Specifications Sheave diameter: 1...

Features Efficient and light FRX Wichard thimbles are efficient, light and reliable. Very strong, they can be used for heavy loads and semi-static lines. FRX thimbles are designed to make your lines run smoothly with minimum wear. They are hard anodized...

Clamcleat® CL253AN preferred choice for adjusting dinghy trapeze lines. Also used for vangs & kicking straps; outhauls and small dinghy forestays. Each Clamcleat® CL253 is supplied with a black "link" (PTLINK). This...

Spinlock PXR Cam Cleat for 8mm to 10mm rope. The PXR racing camcleat features a three stage adjustment spring allowing users to select the release setting for the application and prevailing conditions.Lighter settings for continuously trimmed sheets,...

The lightweight alternative to a block, with no moving parts these are an extremely low maintainance item. Unlike some other manufacturers our rings are hard anodized with PTFE coating to provide the smoothest wear resistant surface possible. ...

For max 12mm lines. - For guiding lines between two fixed points with little horizontal or vertical deflection- Guides extra lines to the cockpit cleats and clutches when no organiser sheaves are available- Double screw fitting- Stainless steel rope...

For max 10mm lines. - For guiding lines between two fixed points with little horizontal or vertical deflection- Guides extra lines to the cockpit cleats and clutches when no organiser sheaves are available- Double screw fitting- Stainless steel rope...

Spinlock TWF Winchfeeder with 50mm sheave. If cross winching is a better option, a line from a clutch on one side can be led quickly and efficiently to a winch on the opposite side via the winchfeeder sheave. Their very low, 25mm profile, keeps...

Barton High load fixing strop or 'Tweeker' designed to be spliced into 16mm rope    

Barton low friction eyes are manufactured in marine grade aluminium and finished in a unique hard ‘Spectro’ grey anodising. These lightweight high load rings are suitable for a variety of uses on board, from lazy jacks, barber haulers, mast...

Spinlock T-Series organisers lead multiple lines back from the mast to XAS or XTS/XCS powerclutches. - Minimal overall length- Efficient bearing- Reduces winch effort and increases halyard life- Modular end fairings for safe sideloading- Asymmetric...

Spinlock T-Series organisers lead multiple lines back from the mast to XAS or XTS/XCS powerclutches. - Minimal overall length- Efficient bearing- Reduces winch effort and increases halyard life- Modular end fairings for safe sideloading- Asymmetric...

Spinlock T-Series organisers lead multiple lines back from the mast to XAS or XTS/XCS powerclutches. - Minimal overall length- Efficient bearing- Reduces winch effort and increases halyard life- Modular end fairings for safe sideloading- Asymmetric...

New slimline range of organisers for leading lines to the clutch. - Modular end fairings for safe side loading- Sheave spacing identical to previous model- No base plate needed- New profile composite sheaves- T38 stacks on T38Rope Range : 3mm -...

New slimline range of organisers for leading lines to the clutch. - Modular end fairings for safe side loading- Sheave spacing identical to previous model- No base plate needed- New profile composite sheaves- T38 stacks on T38Rope Range : 3mm -...