Sailboat Hardware

Harken ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Aluminum Cam-Matics are hardcoat-anodized for high-load, high-wear, continuous adjustment applications. Specifications Minimum line diameter: 1/4" (6...

Race once with the windward sheeting traveler car and you’ll never race without one again. Pull the car above the centerline without releasing the leeward control line. Tack, and the car stays in the same position, ready to be pulled to the new...

Harken Bolt-Down Fairleads are used on boats 6-15 m (20-50 ft) as shallow-angle line deflectors. These weight-saving fairleads are built of 6061-T6 Hard Lube-anodized aluminum for durability. Smooth surfaces and radiused center holes minimize line wear...

High-performance end controls allow the installation of 2:1 to 4:1 purchases. Designed for high-performance, free-running systems, Carbo control blocks with Delrin ball bearings let cars instantly adjust and release under load. Delrin is a registered...

High-performance end controls allow the installation of 2:1 to 4:1 purchases. Designed for high-performance, free-running systems, Carbo control blocks with Delrin ball bearings let cars instantly adjust and release under load. Delrin is a registered...

Harken Bolt-Down Fairleads are used on boats 6-15 m (20-50 ft) as shallow-angle line deflectors. These weight-saving fairleads are built of 6061-T6 Hard Lube-anodized aluminum for durability. Smooth surfaces and radiused center holes minimize line wear...

Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Specifications Mainsheet block pin diameter: 1/4" (6 mm) Control block pin diameter: 5/32" (4 mm) Maximum working load: 1250 lb (567...

Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Specifications Mainsheet block pin diameter: 3/16" (5 mm) Control block pin: 5/32" (4 mm) Maximum working load: 850 lb (386 kg) Breaking...

Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Specifications Maximum working load: 850 lb (386 kg) Breaking load: 2500 lb (1134 kg) Minimum curved track radius: 3.5 ft (1.07 m) Car...

Harken Bolt-Down Fairleads are used on boats 6–15 m (20–50 ft) as shallow-angle line deflectors. These weight-saving fairleads are built of 6061-T6 Hard Lube-anodized aluminum for durability. Smooth surfaces and radiused center holes minimize...

Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Specifications Maximum working load: 500 lb (227 kg) Breaking load: 2500 lb (1134 kg) Minimum curved track radius: 3.5 ft (1.07 m) Car...

Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Specifications Fasteners: 5 FH mm (#10 FH inch) Mounting hole spacing: 3 15/16" (100 mm) Low-load endstop: 174 High-load endstop: 264 Trim cap:...