Sailboat Hardware

Ball bearing swivel bases feature dual rows of Delrin ball bearings that swivel freely even under high loads. Bases include stand-up springs and a U-adaptor to accept a variety of appropriate blocks. Delrin is a registered trademark of E. I. du Pont de...

Fast Release Fairleads feature low-friction, angled stainless steel line guides on the exit side of the cleat. The angled lead keeps the line away from the cam to eliminate unexpected recleats during maneuvers. Use for fast spinnaker take-downs during...

Harken gross-trim/fine-tune mainsheet systems are easy to install and use. These optimized systems decrease overall line clutter because they use less line than traditional gross-trim/fine-tune systems. Specifications Primary sheave diameter: 3" (76 mm)...

The 494 and 495 Fast Release Fairleads feature low-friction, angled stainless steel line guides on the exit side of the cleat. The angled lead keeps the line away from the cam to eliminate unexpected recleats during maneuvers. Use for fast spinnaker...

High-strength Pivoting Lead Blocks with cams are used for halyard controls on larger keelboats and as "head knockers" on dinghies and beachcats for sheeting directly from the boom. Hole spacing and rivet size are the same as classic models, making...

High-strength Pivoting Lead Blocks with cams are used for halyard controls on larger keelboats and as "head knockers" on dinghies and beachcats for sheeting directly from the boom. Hole spacing and rivet size are the same as classic models, making...

The 494 and 495 Fast Release Fairleads feature low-friction, angled stainless steel line guides on the exit side of the cleat. The angled lead keeps the line away from the cam to eliminate unexpected recleats during maneuvers. Use for fast spinnaker...

The 16 mm is Harken's smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system uses stainless steel balls in a captive grooved race and has a 250 lb (113 kg) maximum working load...

Harken Stand-Up Toggle with Control Tangs. Specifications Mainsheet block pin diameter: 5/16" (8 mm) Control block pin diameter: 1/4" (6 mm) Maximum working load: 4500 lb (2041 kg) Height: 2 3/16" (56 mm) Weight: 8.2 oz. (231.3 g)

A Harken battcar system along with full-length battens helps raise, douse, and reef with ease and acts as extra crew if you're sailing shorthanded. Battcar systems outperform in-mast or in-boom furling, cost less, and you don't need to recut your sail...

Harken gross-trim/fine-tune mainsheet systems are easy to install and use. These optimized systems decrease overall line clutter because they use less line than traditional gross-trim/fine-tune systems. Specifications Minimum line diameter: 5/16" (8 mm)...

A Harken battcar system, along with full-length battens, helps raise, douse and reef with ease and acts as extra crew if you're sailing shorthanded. Battcar systems outperform in-mast or in-boom furling, cost less, and you don't need to recut your sail...