Sailboat Hardware

Wire Fairleads maintain a low profile while holding the line close to the cleat. Specifications Fastener spacing: 1 1/16" (27 mm) Fits cam: 468, 471 Height: 15/16" (23 mm) Length: 1 7/8" (48 mm) Width: 15/16" (24 mm) Weight: 0.29 oz. (8 g) Technical...

The X-Treme Angle Fairlead allows releasing and recleating at angles up to 90 degree to the cleat. This sets it apart from other fairleads where line uncleats at extreme angles and can’t recleat without centering the line. Specifications Fastener...

Low-friction carbo air blocks are lightweight, strong, reliable and affordable. Companions to the popular Harken black magic block line, these small, compact blocks have very high working loads for safe, easy trimming. Features Single fixed: Integral...

Endstops absorb shock loads and prevent damage to the car. Kits include endstops, Loctite, 2 slug mounts. Loctite is a trademark of Hankel AG and Company KGaA. Specifications Mounting slugs per kit: 2 Fasteners: M5 mm Weight: 0.5 oz. (14 g) Note:...

Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. 3807 track mounts to mast using a unique slug system that allows mast-up installation. Specifications Fastening method: Mounting slugs Fastener...

Mounting kit slugs are available for flat or round mast grooves. Order one kit per track section. Specifications Mounting slugs per kit: 15 Connector slugs per kit: 1 Fasteners: M5 mm Mounting slug length: 3/4" (19 mm) Connector slug length: 2 5/8" (67...

Made of durable, flexible PVC, stand-up boots holdblocks up without snagging lines.The 369 fits 40 mm and 57 mm Carbo and Black Magic blocks. Specifications Height (A): 2" (51 mm) Width (B): 1 9/16" (40 mm) Weight: 0.45 oz. (12.7 g)

Ball bearing swivel bases feature dual rows of Delrin ball bearings that swivel freely even under high loads. Bases include stand-up springs and a U-adaptor to accept a variety of appropriate blocks. Delrin is a registered trademark of E. I. du Pont de...

The 16 mm is Harken's smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system uses stainless steel balls in a captive grooved race and has a 250 lb (113 kg) maximum working load. Matches...

The cam mounting bracket attaches the trigger cleat to 76 mm (3") low-profile triples. It fits the 152 and 411. Specifications Fastener spacing: 2 5/8" (66 mm) Fasteners: #10 TH inch (5 TH mm) Fits cam: 418 Height: 1/4" (6 mm) Length: 3 9/64" (79 mm)...

The X-Treme Angle Fairlead allows releasing and recleating at angles up to 90 degree to the cleat. This sets it apart from other fairleads where line uncleats at extreme angles and can’t recleat without centering the line. Specifications Maximum...

Low-friction carbo air blocks are lightweight, strong, reliable and affordable. Companions to the popular Harken Black Magic block line, these small, compact blocks have very high working loads for safe, easy trimming. Specifications Sheave diameter: 1...

Low-friction carbo air blocks are lightweight, strong, reliable and affordable. Companions to the popular Harken Black Magic block line, these small, compact blocks have very high working loads for safe, easy trimming. Specifications Sheave diameter: 1...

Low-friction carbo air blocks are lightweight, strong, reliable and affordable. Companions to the popular Harken Black Magic block line, these small, compact blocks have very high working loads for safe, easy trimming. Specifications Sheave diameter: 1...

Low-friction carbo blocks are lightweight, strong, reliable and affordable. Companions to the popular Harken Black Magic block line, these small, compact blocks have very high working loads for safe, easy trimming. Specifications Sheave diameter: 1 1/8"...

Use the 237 and 339 where there is little deflection in the line such as when routing a spinnaker pole foreguy aft along the cabin house. Specifications Maximum line diameter: 1/4" (6 mm) Fastener spacing: 0.71" (18 mm) Fasteners: #8 RH inch (4 RH mm)...

The V Block delivers another breakthrough in Harken’s loop block series for Grand-Prix racers. Harken engineers have simplified the mechanics by combining the axial and thrust bearings into a single bearing set of V-shaped titanium rollers. The...

Strong aluminum jib leads deflect jib sheets to winches, preventing overrides. These jib leads have two small drilled holes through which a loop can be spliced to attach the hobble. This temporarily secures the jib/genoa clew to free-up a winch for mark...

Made of durable, flexible PVC, stand-up boots hold blocks up without snagging lines. The 370 fits 75 mm Carbo blocks. Specifications Height: 2 5/8" (67 mm) Width: 2 3/16" (55 mm) Weight: 1.1 oz. (30.8 g)

Harken Bolt-Down Fairleads are used on boats 6-15 m (20-50 ft) as shallow-angle line deflectors. These weight-saving fairleads are built of 6061-T6 Hard Lube-anodized aluminum for durability. Smooth surfaces and radiused center holes minimize line wear...