null
Ireland EU online store

Laser Parts ( See also ILCA Parts)

Laser Parts ( See also ILCA Parts)

The manufacture and supply of the world famous Laser Class is now split into two distinctly different groups. There is the Laser Class with its original logo and the new International Laser Class Association Laser, the ILCA Class, which is the only approved boat for ILCA Class governed events these include Provincial and National Championships and as well as the world Olympics. The Laser Class manufactured by Laser Performance, although now not officially monitored by ILCA, remains the identical boat and is perfect for Club sailing and now has its own Championships. CH Marine now supplies Laser Class Boats from Laser Performance and ILCA Laser Boats from Element 6 and Ovingtons. Parts are mostly interchangeable but certain ILCA approved parts are required for compliance in ILCA events. Confused? Dont worry, please just call us and we will be glad to advise

  • Laser Cockpit Drain Plug Bushing Assembly 91284 Laser Cockpit Drain Plug Bushing Assembly 91284

    Laser Cockpit Drain Plug Bushing Assembly 91284

    Laser

    Current Stock: 2
    €39.95
    Laser Cockpit Drain 92184 - This Laser Drain Bush Set sits at the rear of the cockpit and creates the opening for the self-bailer control rod to operate through. When replacing this item, be sure to bed it with Sikaflex 291. The drain bushing assembly...
    LS-91284
    €39.95
  • Holt Laser Grab Rail - Boxed Version

    Holt Laser Grab Rail - HT7038 Boxed Version

    Laser

    Current Stock: 6
    €38.95
    Holt Laser Grab Rail fits all Laser Performance and ILCA Dinghies - Two required per boat - It is recommended to use a sealant, such as Sikaflex 291i, to bed screws  Accessories Sikaflex 291i Sealant - Click here  
    HT70381
    €38.95
  • ILCA 7 Sail Batten MKII Set

    ILCA 7 Mk11 Sail Batten Set

    Laser

    Current Stock: 10
    €37.95
    ILCA 7 Mk11 Batten Set, approved by ILCA for all class events. ILCA 7 Batten set complete with all 3 battens and end caps. This set is suitable for the MK2 sails.
    ILC2721
    €37.95
  • Laser Upper Kicker Block

    Laser Club Kicker Vang Upper Block

    Laser

    Current Stock: 0
    €37.95
    The Laser Kicker Vang Upper Block comes with a curved kicker key that slides into a slot on the boom. This is the club version, which is perfect for training and practice. The block is also suitable for use in a Laser Pico Kicker. Specification Laser...
    LS-90670
    €37.95
  • Laser Vago/Bahia/Pico Pin Drop Nose

    Laser Vago/Bahia/Pico Pin Drop Nose 6mm x 64mm

    Laser Performance

    Current Stock: 0
    €32.95
    Laser Drop Nose Pin to fit the Vago/Bahia/Pico boats. Specifications Size: 6mm x 64mm Material: Stainless Steel
    LS-90658
    €32.95
  • Laser Performance Pico/Standard Vang Block without Key

    Laser Club Kicker Vang Upper Block (No Key)

    Laser

    Current Stock: 0
    €30.95
    The Laser Lower Vang Block is used for the Laser Pico and Laser Standard rig sailboats on the top section of the Vang which attaches to the eye plate on the boom.Comes with removable pin to attach to eye plate (eye plate LS-91532 sold...
    LS-90671
    €30.95
  • Laser Performance Lower Kicker Plate/Tang

    Laser Performance Lower Kicker Plate/Tang

    Laser

    Current Stock: 0
    €26.95
    Stainless steel kicking strap plate for Standard, Radial, and 4.7 lower mast attached with rivets. Not inlcuded Specifications Material: Stainless steel Fasteners 4.8mm x 12.8mm Stainless Rivets
    LS-90644
    €26.95
  • Laser Boom Vang Plate with Key Slot

    Laser Boom Vang Plate with Key Slot

    Laser Performance

    Current Stock: 3
    €25.95
    The Laser Boom Vang Plate with Key Slot fits onto the boom and can be used to attach the Laser Kicker system as a quick connect. Specification Laser part no: 91535
    LS-91535
    €25.95
  • Laser Racing Clamcleat - CL220 - 12mm-16mm

    Laser Performance CL220 Racing Clamcleat - 12mm-16mm

    Laser

    Current Stock: 0
    €23.12
    Aluminium deck cleat is designed to hold 12mm to 16mm rope under high pressure. Specification Material: Aluminium Rope diameter: 1/2 - 5/8" (12 mm - 16 mm) Hole diameter: 3 3/4" (95 mm) Length: 4 5/8" (118 mm) Width: 1 1/2" (37 mm) Height: 1 3/4"...
    LS-CL220/R
    €23.12
  • Laser Performance Harken Micro Cammetrick Cleat - Plastic

    Laser Performance Harken Micro Cammetrick Cleat - Plastic

    Laser

    Current Stock: 0
    €22.99
    The Laser Harken Cammetrick cleat is similar to the Laser Cleat 91517, but this one is made of plastic. Harken Micro Cam Cleats hold lines securely and release instantly for easy, precise trimming. Lightweight fiber-reinforced Carbo-Cams for racing where...
    LS-91285
    €22.99
  • Laser Performance XD Rudder Mega Bolt

    Laser Performance XD Rudder Mega Bolt

    Laser

    Current Stock:
    €22.95
    The Laser XD rudder head pivot bolt is an upgraded, large-diameter bolt and nylock nut with 20 mm washers. The rudder bolt will hold your rudder blade firmly in place.
    LS-85078
    €22.95
  • Laser Rudder Retaining Clip

    Laser Rudder Retaining Clip

    Laser Performance

    Current Stock: 12
    €22.95
    The Laser Rudder Retaining Clip screws (screws sold separately) onto the transom of your dinghy and are used to secure the rudder in place. Feature Made from stainless steel
    LS-85238
    €22.95
  • Holt Laser Autobailer by Nautos  HT911151 Holt Laser Autobailer by Nautos  HT911151

    Holt Laser Autobailer by Nautos

    Laser

    Current Stock: 4
    €21.95
    Nautos Autobailer to suit all model Laser and ILCA sailing dinghies, comes as a complete swop-out assembly with fixing screw Features Slide down chute with 'O rings' Screw and plastic insert included Drains water from cockpit Easy retrofits to older...
    HT911151
    €21.95
  • Laser Stainless Steel Sheave Block with Clevis Pin

    Laser Sea Sure S/S Block with Clevis Pin 25mm

    Laser Performance

    Current Stock: 7
    €21.50
    The 25mm plain bearing block range is one of Sea Sure's oldest and best selling ranges. The range uses marine grade stainless steel side plates and rivets with an arnite (plastic) sheave which is incredibly hard wearing and light. This range could be...
    LS-SEASURE-01.32
    €21.50
  • Laser Performance Grab Rail Grommets

    ILCA Laser Grab Rail Grommets - Pack of 5 - ILC348

    Laser

    Current Stock: 0
    €20.95
    The ILCA Laser Grab Rail Grommets are for attaching the Laser Grab Rail. The Grab Rail requires five per side. Grommets are supplied in a pack of ten which will complete one ILCA Laser Hull. Remember to put Sikaflex on before you attached the Grab Rail...
    LS-91304
    €20.95
  • Laser Performance Bailer Bung

    Laser Performance Bailer Bung

    Laser

    Current Stock: 0
    €20.95
    A replacement bung for your Laser Self Bailer. Very easy to fit and recommended to have a spare Bailer Bung with your sailing kit. Laser® is a registered trademark owned by Velum Limited and currently licensed for use in Europe to Laser...
    LS-91351
    €20.95
  • Laser Performance Traveller Line - 5mm - Red Laser Performance Traveller Line - 5mm - Red

    ILCA Laser Traveller Line - Dyneema D12 SK78 5mm Red

    Laser

    Current Stock: 1
    €18.95
    ILCA Laser Traveller Line, made from Marlow Excel Dyneema D12 SK78, the high strength gives the confidence to hike the traveller down hard. Features Low friction Lightweight Low water absorption Superb low stretch for ultimate tension on the...
    LSM-30033
    €18.95
  • Laser Pico Mast Step Plate

    Laser Pico Mast Step Plate

    Laser Performance

    Current Stock: 6
    €16.95
    The Laser Pico Mast Step fits the mast to the deck of your boat. 4 holes to bolt it to the hull. Specifications Material: Plastic Colour: Black Laser part no: 91299
    LS-91299
    €16.95
  • Laser Performance Traveler block

    Laser Performance Traveler Block - Blue - Large

    Laser

    Current Stock: 0
    €15.95
    Large original traveller plain bearing block, plastic construction, uses englefield clips or sometimes called kissing clips to connect to the traveller block. Specifications Material: Plastic Colour: Blue Size: Large
    LS-91043
    €15.95
  • Laser Boom Block Classic - Black

    Laser Boom Block Classic - Black

    Laser

    Current Stock: 0
    €14.76
    Original plastic construction plain bearing block - fitted to boom with 91537 eye strap and attached with rivets.
    LS-90667B
    €14.76
  • Laser Boom Block - Classic

    Laser Boom Block Classic - Blue

    Laser

    Current Stock: 0
    €14.76
    Original plastic construction plain bearing block - fitted to boom with 91537 eye strap and attached with rivets.
    LS-90667
    €14.76
  • Laser Performance Lower Kicker Plate/Tang

    ILCA Laser Lower Vang Tang - Official

    Laser

    Current Stock: 1
    €10.95
    Stainless steel kicking strap plate for Standard, Radial and 4.7 lower mast attached with rivets. Not included. Specifications Material: Stainless steel Fasteners 4.8mm x 12.8mm Stainless Rivets
    ILC4923
    €10.95
  • Laser Performance Curved Kicker Vang Key Laser Performance Curved Kicker Vang Key

    Laser Performance Curved Kicker Vang Key

    Laser

    Current Stock: 12
    €10.95
    The Laser Curved Kicker Key fits onto the kicker/vang system and slots into the boom. Features New and stronger kicker key (thicker) Connects to the upper boom vang block Official class legal Laser sailboat part
    LS-90664
    €10.95
  • Laser Performance Traveller Block - Blue - Small

    Laser Performance Traveller Block - Blue - Small

    Laser

    Current Stock: 0
    €10.95
    Small original traveller plain bearing block, plastic construction, uses englefield clips or sometimes called kissing clips to connect to the traveller block. Specifications Material: Plastic Colour: Blue Size: Small
    LS-91245
    €10.95
  • Laser Performance Secondary Outhaul Line - 4mm - Standard and Radial

    ILCA Laser Secondary Outhaul / Vang Line 4mm x 4.95m

    Laser

    Current Stock: 5
    €10.00
    Laser Outhaul Control Line Pre-cut 4 mm x 4.8 m made from high quality Marlow Excel Control. Features Precision control and release Smooth cover giving low friction through the sheaves Firm construction allows precise grip in the jam cleat Durable...
    LSM-30010
    €10.00
  • Laser Performance Bullseye Fairlead with 14 Stainless Steel Insert

    Laser Performance Bullseye Fairlead with 14 Stainless Steel Insert

    Laser

    Current Stock: 0
    €8.95
    This large blue plastic Laser Boom Fairlead has a stainless steel insert to reduce chafing and allow larger lines with heavier loads. Features Suits the topaz deck fairlead Requires 2 x screw (6 mm x 25 mm) Specifications Material:...
    LS-91319
    €8.95
  • ILCA Laser Tiller Joint

    RWO R0844 – XTEN Omniflex Tiller Joint - Suits ILCA Laser

    Laser

    Current Stock: 25
    €7.95
    High quality, reliable RWO Omniflex Tiller Joint to suit most dinghy tiller extension, including ILCA Laser, Topper, and many others. This Omniflex joint is made from Elastomeric polymer which allows all directional flexibility. The fitting includes a...
    RWO0844
    €7.95
  • Laser Downhaul Primary Line

    Laser Downhaul Primary Line - Pre-Made with Eyes

    Laser

    Current Stock: 0
    €7.06
    Pre-Spliced Laser Primary line for the Cunningham or Laser Downhaul system, which connects to the kicker at one end, is rigged through the sail, and connected to a becket block at the other end. Specifications Diameter: 3.5mm  Length:...
    ROOSTER-101761
    €7.06
  • Laser Outhaul Primary Laser Outhaul

    Laser Outhaul Dyneema Primary Line 4mm x 1.5m

    Laser

    Current Stock: 0
    €5.95
    The Laser Outhaul Primary Dyneema Line 4mm x 1.5m is used to fasten the sail to the boom while controlling the shape and curve of the sail. It runs from the clew hook to the fairlead at the end of the boom. The primary line is the part you don't handle...
    LSM-30009
    €5.95
  • ILCA Laser Dyneema Primary Line - Black - 1.3m

    ILCA Laser Dyneema SK78 Primary Line Black 4mm x 1.3m Outhaul/Vang/Downhaul

    Laser

    Current Stock: 0
    €5.50
    Laser Primary Control Line in Marlow Excel D12 Dyneema SK78. Features High strength 12 Strand Easy to splice Low water absorption Superb low stretch for precision control Specifications Material: Dyneema Colour: Black Pre-cut diameter: 4 mm Length: 1...
    LSM-30001
    €5.50