Laser Parts ( See also ILCA Parts)
The manufacture and supply of the world famous Laser Class is now split into two distinctly different groups. There is the Laser Class with its original logo and the new International Laser Class Association Laser, the ILCA Class, which is the only approved boat for ILCA Class governed events these include Provincial and National Championships and as well as the world Olympics. The Laser Class manufactured by Laser Performance, although now not officially monitored by ILCA, remains the identical boat and is perfect for Club sailing and now has its own Championships. CH Marine now supplies Laser Class Boats from Laser Performance and ILCA Laser Boats from Element 6 and Ovingtons. Parts are mostly interchangeable but certain ILCA approved parts are required for compliance in ILCA events. Confused? Dont worry, please just call us and we will be glad to advise
-
Optiparts Sail Batten Set for ILCA 7 /Laser Mk2 - Not Official
Optiparts
Current Stock: 2€28.95Tapered sail batten set MK2 for Laser® and ILCA® Sizes 1 x 74 cm 1 x 60 cm 1 x 40 cmOPEX2031MK2€28.95 -
Optiparts Sail Batten Set for ILCA /Laser 4 & 6 - Not Official
Optiparts
Current Stock: 0€28.95Optiparts Set of sail battens to fit all ILCA Laser 4 & 6 Sizes 2 x 60 cm 1 x 40 cmOPEX2031€28.95 -
DB-Racing Vang Lines Pack - Suits ILCA® & Laser
Optiparts
Current Stock: 0€27.95DB-Racing Vang Line Pack comes with 3 mm Dyneema® primary vang line for Laser® and ILCA® with a spliced loop on one side for easy attachmentand 4 mm DB-Racing secondary control line, consists of a Dyneema® core and Technora /...OPEX2216€27.95 -
Harken Dinghy Clew Hook 433
Harken
Current Stock: 0€27.95The 433 Dinghy Clew Hook is designed for lasers and other loose-footed dinghies. Installs permanently on the boom and allows you to instantly attach and adjust your sail in high wind and waves. Weight: 0.65 oz. (18.4 g) Technical...HK433€27.95 -
ILCA Autobailer by Nautos
ILCA
Current Stock: 10€27.95Official ILCA approved Nautos self-bailer ( Autobailer) - Suits all models ILCA and Laser. Complete autobailer assembly for the ILCA dinghy with bailer plate, chute door, bung, and screw. This is a class legal bailer with ILCA stamp on body of the bailer...ILC5939€27.95 -
ILCA Laser Gooseneck
ILCA
Current Stock: 2€26.95ILCA approved, stainless steel gooseneck for ILCA 4, 6 & 7 sailboats - This gooseneck also suits Laser Performance models in Standard, Radial, and 4.7 rigs Specifications Material: Stainless steel Fasteners 6 x M4.8 x 12mm Stainless Steel Rivets -...ILC4920€26.95 -
Laser Performance Lower Kicker Plate/Tang
Laser
Current Stock: 0€26.95Stainless steel kicking strap plate for Standard, Radial, and 4.7 lower mast attached with rivets. Not inlcuded Specifications Material: Stainless steel Fasteners 4.8mm x 12.8mm Stainless RivetsLS-90644€26.95 -
Laser Boom Vang Plate with Key Slot
Laser Performance
Current Stock: 3€25.95The Laser Boom Vang Plate with Key Slot fits onto the boom and be used to attached the Laser Kicker system as a quick connect. Specifications Laser part no: 91535LS-91535€25.95 -
Laser Performance Sail Batten Tip - 6 Pack
Laser
Current Stock: 6€25.95Laser batten tips that will replace the old style tips. This pack will able you to replace the ends of all 3 battens.LS-95869€25.95 -
Holt Aluminium Fairlead Deck & Boom (Pair)
Holt
Current Stock: 2€24.95Holt Laser Replacement Aluminium Fairlead Boom & Deck (Pair) : HT.282ALU Holt arts are high quality replacements that perform the same function as the original part. They should not be confused with official parts bearing the Laser® registered...HT.282ALU€24.95 -
Laser Performance Daggerboard Retainer Line Assembly - Black - 7mm
Laser
Current Stock: 0€24.95Laser shock cord retainer with plastic clip keeps dagger board in place. Specifications Colour: Black Length: 7 mmLS-81067€24.95 -
ILCA Laser Bottom Plate for Harken XD Deck Cleat
ILCA
Current Stock: 3€24.00Replacement ILCA Laser bottom plate fitting to suit Harken XD outhaul and downhaul deck cleat fitting. Includes line guides. Suits all ILCA and Laser sailboats fitted with the XD or High Performance Cleat system and retrofits Laser part no...ILCZ333€24.00 -
Harken Air Block with O-Ring 404 - 16mm
Harken
Current Stock: 32€23.95The 16 mm is Harken’s smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system uses stainless steel balls in a captive grooved race and has a 250 lb (113 kg) maximum working load. The...HK404€23.95 -
ILCA Laser Grab Rail - Grey
ILCA
Current Stock: 9€23.95Grabrails for ILCS and Laser Sailboats - Colour Grey - Suits all RigsILC5930€23.95 -
Laser Performance CL220 Racing Clamcleat - 12mm-16mm
Laser
Current Stock: 0€23.12Aluminium deck cleat is designed to hold 12mm to 16mm rope under high pressure. Specification Material: Aluminium Rope diameter: 1/2 - 5/8" (12 mm - 16 mm) Hole diameter: 3 3/4" (95 mm) Length: 4 5/8" (118 mm) Width: 1 1/2" (37 mm) Height: 1 3/4"...LS-CL220/R€23.12 -
Rooster Rigging Bag
Rooster
Current Stock: 0€23.00Padded Bag 350mm by 350mm square with webbing handle and secure velcro closure. Ideal for taking your rigging off your mast when travelling and keeping it and your gelcoat safe in the bottom of your boat.ROOSTER-105207€23.00 -
Laser Performance Harken Micro Cammetrick Cleat - Plastic
Laser
Current Stock: 0€22.99The Laser Harken Cammetrick cleat is similar to the Laser Cleat 91517, but this one is made of plastic. Harken Micro Cam Cleats hold lines securely and release instantly for easy, precise trimming. Lightweight fiber-reinforced Carbo-Cams for racing where...LS-91285€22.99 -
ILCA Laser Harken XD Block Plate
ILCA
Current Stock: 18€22.95The ILCA Laser XD Stainless Steel Block Plate is deck mounted to guide the Downhaul and Outhaul Control lines towards the Harken Deck Jam Cleat. The plate is mounted directly aft of the mast slot and requires 2 x Laser XD Harken 16 mm Air Block with Fork...ILC5918€22.95 -
Laser Performance XD Rudder Mega Bolt
Laser
Current Stock:€22.95The Laser XD rudder head pivot bolt is an upgraded large diameter bolt and nylock nut with 20 mm washers. The rudder bolt will hold your rudder blade firmly in place.LS-85078€22.95 -
Laser Rudder Retaining Clip
Laser Performance
Current Stock: 12€22.95The Laser Rudder Retaining Clip screws (screws sold seperately) onto the transom of your dinghy and is used to secure the rudder in place. Features Made from stainless steel.LS-85238€22.95 -
ILCA Laser Harken Mainsheet Boom End Block with Becket
ILCA
Current Stock: 30€22.50High performance Harken boom end, mainsheet block with becket for all rigs ILCA or Laser Dinghies. The boom block with becket is attached to the aft end of the ILCA boom. Pass your mainsheet through the block, down to the traveler block, and back up to...ILC5961€22.50 -
Holt Laser Autobailer by Nautos
Laser
Current Stock: 4€21.95Nautos Autobailer to suit all model Laser and ILCA sailing dinghies, comes as a complete swop-out assembly with fixing screw Features Slide down chute with 'O rings' Screw and plastic insert included Drains water from cockpit Easy retrofits to older...HT911151€21.95 -
Laser Lower Mast Plug - Radial/Pico/Funboat
Laser Performance
Current Stock: 7€21.95The Laser Lower Section Mast Plug fits the Radial/Pico/Funboat dinghies. Features Fits the mast base (lower section) Specifications Laser part no: 90641LS-90641€21.95 -
Laser Sea Sure S/S Block with Clevis Pin 25mm
Laser Performance
Current Stock: 7€21.50The 25mm plain bearing block range is one of Sea Sure's oldest and best selling ranges. The range uses marine grade stainless steel side plates and rivets with an arnite (plastic) sheave which is incredibly hard wearing and light. This range could be...LS-SEASURE-01.32€21.50 -
Harken Base Plate for ILCA/ Laser Deck Cleat
Current Stock: 3€20.95Replacement lower base plate only for Harken Outhaul / Vang Deck CleatILC5924€20.95 -
ILCA Laser Grab Rail Grommets - Pack of 5 - ILC348
Laser
Current Stock: 0€20.95The ILCA Laser Grab Rail Grommets are for attaching the Laser Grab Rail. The Grab Rail requires five per side. Grommets are supplied in a pack of ten which will complete one ILCA Laser Hull. Remember to put Sikaflex on before you attached the Grab Rail...LS-91304€20.95 -
Laser Performance Bailer Bung
Laser
Current Stock: 0€20.95A replacement bung for your Laser Self Bailer. Very easy to fit and recommended to have a spare Bailer Bung with your sailing kit. Laser® is a registered trademark owned by Velum Limited and currently licensed for use in Europe to Laser...LS-91351€20.95 -
Laser Performance Friction Pad - MK1
Laser
Current Stock: 17€20.95The MK1 flat back rubber friction pad for the deck of any Laser dinghy designed as a friction plate to keep the Laser daggerboard in place during sailing.LS-85239€20.95 -
ILCA Laser Mainsheet Boom Centre Block- Harken
ILCA
Current Stock: 33€19.95ILCA Laser high performance Harken middle boom mainsheet block with bearings - This block is permanently fixed to the laser boom and riveted in place with a stainless steel eye strap. Features ILCA Lass Class legal High performance Harken design with...ILC5962€19.95 -
Trem Universal Tiller Joint with Stainless Swivel
Laser
Current Stock: 3€19.95Older style articulated stainless steel tiller joint for smaller sailing dinghies40060€19.95 -
ILCA Laser Traveller Line - Dyneema D12 SK78 5mm Red
Laser
Current Stock: 1€18.95ILCA Laser Traveller Line, made from Marlow Excel Dyneema D12 SK78, the high strength gives the confidence to hike the traveller down hard. Features Low friction Lightweight Low water absorption Superb low stretch for ultimate tension on the...LSM-30033€18.95 -
RS Sailing Pico Centre Toestrap
Laser Performance
Current Stock: 34€18.95RS Sailing Toestrap to fit the middle section of a Laser Pico Dinghy. Specifications RS part no: PIC-HF-400RS-PIC-HF-400€18.95 -
Laser End of Boom Mainsheet Block with Becket
Optiparts
Current Stock: 23€16.95Optiparts EX2154 end of boom mainsheet block with becket for Laser and ILCA all models - Schools or Club version. Fitting Instructions Drill out old rivets to remove the boom eye and replace using 4.8mm x 12mm Stainless...OPEX2154€16.95 -
Laser Pico Mast Step Plate
Laser Performance
Current Stock: 6€16.95The Laser Pico Mast Step fits the mast to the deck of your boat. 4 holes to bolt it to the hull. Specifications Material: Plastic Colour: Black Laser part no: 91299LS-91299€16.95 -
Rooster Spring Plate for ILCA Nautos Self Bailer 129171
Rooster
Current Stock: 20€16.00These bailer spring plates are manufactured using the highest quality spring stainless steel, designed to both retract using spring tension, and at the same time providing a surface for the activator to push against to close the chute. NOTE: This...ROOSTER-104347€16.00 -
ILCA Laser Boom Vang Key Plate ILC316
ILCA
Current Stock: 3€15.95Replacement boom vang plate for use with ILCA and Laser boats Fasteners Requires 4 x 4.8mm x 12.8m Stainless Steel A4 RivetsILC4932€15.95 -
Laser Performance Traveler Block - Blue - Large
Laser
Current Stock: 0€15.95Large original traveller plain bearing block, plastic construction, uses englefield clips or sometimes called kissing clips to connect to the traveller block. Specifications Material: Plastic Colour: Blue Size: LargeLS-91043€15.95 -
Rooster ILCA - Laser- RS Feva Clew Strap - 50mm
Rooster
Current Stock: 36€15.00The ultimate clew tie down for ILCA and Laser Sail Boats, as well a RS FevasThe strap holds the clew tightly in place using velcro and through clever design it is easy fitted and yet still slips nicely along the boom.ROOSTER-100621€15.00 -
Laser Vago/Bahia/L2000 Centreboard Pivot Plate
Laser Performance
Current Stock: 2€14.95The Laser Centreboard Pivot Plate suits the Vago/Bahia/L2000 sailing dinghies and is made from stainless steel. Features Secures the daggerboard in place Suits the Laser Vago, Bahia or L2000 Specifications Material: Stainless steel Laser part no:...LS-85097€14.95 -
Laser Boom Block Classic - Black
Laser
Current Stock: 0€14.76Original plastic construction plain bearing block - fitted to boom with 91537 eye strap and attached with rivets.LS-90667B€14.76
