CHANDLERY

Sowester countersunk self tapper A4 screws in a selection of sizes and pack options. DIN7982

Sowester pan head self tapper A4 screws in a selection of sizes and pack options. DIN7981

Stainless steel pan dead screw bolt sets in a selection of sizes and pack options. DIN7985

Roca Stainless AISI304 Stepped Hinge size  68mm x 37mm with 15mm Step. The offset hinge is designed to move the pivot point of the door further away from the hinge, allowing more open access to the opening. Electro polished finish. Model 441573...

Roca Stainless AISI304 Stepped Hinge size  68mm x 37mm with 12mm Step. The offset hinge is designed to move the pivot point of the door further away from the hinge, allowing more open access to the opening. Electro polished finish -Model 441572...

Roca Stainless AISI304 Stepped Hinge size  68mm x 37mm with 10mm Step. The offset hinge is designed to move the pivot point of the door further away from the hinge, allowing more open access to the opening. Electro polished finish...

The Rocna Anchor is a trusted and tried primary anchor that consistently tests ahead on many other premium anchors. It is a true multi-purpose anchor that sets and holds in most sea beds, from soft mud to hard sand and clay, and its chisel...

The Nuova Rade Top Line Hatches are perfect as storage hatches because they allow you to fully open the hatch door. Can also be used as an inspection hatch. Made in high grade ABS plastic, featuring 180° opening doors and neoprene seals...

The Nuova Rade Top Line Hatches are perfect as storage hatches because they allow you to fully open the hatch door. Can also be used as an inspection hatch. Made in high grade ABS plastic, featuring 180° opening doors and neoprene seals...

Roca AIS 316 stainless, lockable eccentric 291 latch with catch plate, adjustable between 66 - 75mm Dimensions Included Catch Plate No 10 Part No 904207

We've all lost our drain bung at some point, so it's worth having a spare in your repair kit (especially if you're on a multi-day trip); Pyranha drain bungs feature an integral cord and block to prevent them going missing again! A low profile tab also...

Sowester stainless steel carbine hook with spring loaded, screw lock - Selection of sizes. Specifications Diameter Length  8mm 80mm 10mm 100mm 11mm 110mm 13mm 140mm   Note Dimensions are a guide and may vary with different...

Professional and recreational boaters love the extra length and practical features of the Pilot Knife. Purpose-built for performance on freshwater and to pair with a PFD but so versatile that you’ll keep one in the car, the camp bin and the garage...

Fendress single layer, fender covers are manufactured using non abrasive, loop knit acrylic to create premium quality sleeves with no seams. They specially designed to protect your boat's hull from fender abrasion and scuffing, which not...

Fendress single layer, fender covers are manufactured using non abrasive, loop knit acrylic to create premium quality sleeves with no seams. They specially designed to protect your boat's hull from fender abrasion and scuffing, which not...

Fendress single layer, fender covers are manufactured using non abrasive, loop knit acrylic to create premium quality sleeves with no seams. They specially designed to protect your boat's hull from fender abrasion and wear which not only...

Plastimo access hatches are constructed in high grade ASA for durability and water resistance. These hatches are watertight and walk on approved for loads up to 130kg  CE and ISO 12216 certified, for deck mounting in Zone IIA, A, B, C and D on...

Plastimo stainless steel socket for stanchion upright Ø 25 mm, with pad-eye plate 3 hole fixing - Pressed stainless steel base plate. Dimensions Base: 76 x 95 mm Height: 50 mm Accepts: 25mm diameter Stanchion 90 degree upright

Trem attachment bracket for Boarding Ladders - Sold as a pair with fasteners - Model S3007060. The Trem S3007060 is an essential accessory designed to securely fasten platforms and ladders, ensuring safety and stability during use. Crafted with...

Trem nylon adjustable stand-off spacers for Trem folding boarding ladders - Model S2000060 The Trem S2000060 spacers are designed to provide stability and safety for ladders that are used with round pipes. These innovative spacers ensure that your ladder...

Trem adjustable stand-off spacers for Boarding Ladders with stainless fittings and acetal inserts S2025120

The ultimate dinghy halyard for boats that use rope and valley cleats. Features 16 plait Technora/Polyester twist mix outer for superior wear resistance and cleating Inner core of 12 braided pre-stretched SK78 Will not stretch and can be...

Galvanized rowlock or oarlock plates with deep inserts - These rowlock plates help prevent excessive play and wear in the gunwhale. Features Available in 1/2" or 5/8" shaft sizes Sold as a pair

Use these handy Trem quick release clips to make your Trem boarding ladder easily detachable and removeable. Sold as a pair, including fitting hardware Colour: White How they work Suitable for these Trem Boarding...

Handy pack of 4 elasticated sail ties with ball lock ends. These quick connect ties have many uses from camping to sailing. Features Material Double 4mm shock cord Interlock ball ends Available lengths are 30, 40, 50 & 60cm

Sowester nylon bungee or shock cord hooks in sizes to suit 4mm to 10mm shock cord. Features Available sizes: 4, 6, 8, 10mm Material: Nylon Features: Retaining spur How to fit  Pass the end of shock cord through end of hook and out of side hole,...

Trem 316 stainless rail mounted rod holder with adjustable angle and plastic lining to protect your rod, suitable for 22-25mm rails, 43mm aperture. Features 316 Stainless Adjustable angle with non slip ratchet grip Plastic lined Nylon protection...

Plastimo Handydock quick release hook for max rope diameter 22mm. Used in conjunction with Plastimo Handydock Boathoooks, this is the automatic quick release hook for attaching to mooring rings etc.

The Scoprega Aluminium Telescopic Paddles is suitable for inflatable boat and canoes and can be adjusted between 50 cm  and 120 cm. Specifications Adjustable Length: 50 cm to 120 cm Diameter: 24/28 mm x 1 m

Innovative multipurpose connector for rapid attachment to any chain part. Made of AISI 316 high quality stainless steel with 12 mm captive pin to prevent loss. Approx suits 5-12 mm Chain.  Features 12 mm Diameter Pin AISI 316 Stainless...

This Clamshell Ventilator Provides splash protection for vent holes, wires, cable runs, or blower-exhaust hose openings. Measurement Length = 165 mm Width = 145 mm  Height = 60 mm Material Stainless Steel (AISI304) Treatment Electro...

This Clamshell Ventilator can be used as a tankvent cover to reach ejector effect. Measurement L = 55 mm W = 53 mm  H = 16 mm Material Stainless Steel (AISI304) Treatment Electro polished Technical File Datasheet .input-wrapper a { ...

Stainless Roca shell vent for covering anchor compartment drains and other small outlets Measurement L = 44 mm W = 40 mm H = 12 mm Material Stainless Steel (AISI304) Treatment Electro polished Technical File Datasheet .input-wrapper a { ...

An ingeniously designed Sailing Knife from Rooster, providing an incredible safe knife with a virtual enclosed blade, and yet extremely effective at slicing through lines. Replacement blades are available. Features   The opposed slopes at the...

Create a boarding entrance in your guardrails with this sturdy Plastimo Gate Style Stanchion Upright. High quality fabrication in marine grade stainless steel. Features Ø 25 mm 316 Polished Stainless Steel Tube Large eyes for guardrail pelican...

practical and simple solution to store your Inflatable Tender on the stern platform or transom of your vessel  - These Ceredi Easy Davits will suit dinghies up to approx. 3.00mtr, with a max weight of 55kg. The Tender or Dinghy is simply hooked into...

Sowester Rope Cleats in black nylon with two hole fixing. The fasteners, which require countersunk heads, pass through the body of the cleat strengthening the body, giving great strength to the install. Dimensions 110mm Length 110mm Weight 12g Hole...

Luxurious quality, stainless deck cleat from Roca with hidden fixings. Features AIS 316 Polished Stainess Appoved to EN ISO 15084-2003 16mm Bolt Under Fixing Square Base Dimensions  

Sowester stainless long dee shackles, made in marine grade stainless steel. Specification Diameter: 8mm

Handy pre-made Polyropes Fenderlines 12mm x 170cm with eye splice on one end  The pack of two is made from soft, flat braided polyester making them extremely easy to tie with a soft knot that holds its grip and can be easily released...