BOAT CONTROL

The Seastar Dometic HO6001 Tie Bar is used for  linking two outboard motors with a single pivot-mount steering cylinder.  Specifications Includes fittings kit Use with Seastar Dometic Cylinders HC5345, HC5348 & HC5358 For Outboards up to...

Teleflex Heavy Duty 43C Conversion Kit for MT3 Single Only

The Teleflex Model MV-3 Side Mount controls both throttle and gear with one lever The versatile heavy-duty MV-3 Series offers models for outboards, stern drives, and inboards, with specialized versions for ski and jet boats, including versions with a...

Modern styled, Teleflex SL3 dual action control for top mounting, with switch for tilt or trim and finished in black satin. The Teleflex SL3 Engine Twin Control suits most twin instalation outboard and inboard/outdrive engines and can be used with...

Maxpower touch button control panels are specially designed for use with the complete range of MAX POWER tunnel and retractable thrusters. Fitted using a simple hole saw cut-out, panels are easy to install and benefit from a simple and easily replaceable...

Dometic BayStar Outboard Compact, Front Mount, Steering Cylinder HC4645-3. This outboard cylinder is designed to be compact and balanced, fitting most splashwells and providing full engine movement. Suitable for up to 150hp Outboards (See suitability...

Dometic BayStar Outboard Compact, Front Mount, Steering Cylinder HC4648H. This outboard cylinder is designed to be compact and balanced, fitting most splashwells and providing full engine movement. Suitable for up to 150hp Outboards (See suitability...

Can be used with all BayStar helms, with appropriate fittings. Kit contains two cut lengths of tubing. 20’ kit (2 x 20’ lengths tubing): HT4420H

Davey Quadrant Engine Control in polished brass finish with twist handle friction lock. Excellent classic look  Dimensions Fixing Hole Centres 2 1/4" (57.15mm0 4 x 1/4" Holes ( 6mm) Maximum travel using 3 1/2" (89mm) Height 5" Width 7/8" (...

BayStar hydraulic steering is manufactured by SeaStar® one of the most trusted name in pleasure boat steering. BayStar allows you to, cost effectively, install the safety, reliability and comfort of hydraulic steering onto your boat and combine it...

The Dometic Seastar BA150-7ATM is a aluminium and stainless steel hydraulic inboard steering cylinder with 7" stroke, 8.3 cu in capacity - Suitable for boats 8 -10m. Features Low friction hydraulic steering system Configurations for most inboards Easy...

Dometic Seastar  Bezel Kit 20 Degree Safe-T Bezel Kit - This kit includes a black 20 degree bezel, mounting hardware, and brackets. Suitable for Safe-T QC/HPS and NFB Rotary helms Dometic part no 9130005808        

Teleflex Dometic 90° Bezel Kit - TXSH27484 - This kit includes a black 90° bezel, mounting hardware, and brackets. Suitable for Safe-T SH5094P, SH5023P, and HPS SH5180P helms. Dometic part no 9130005810        

Dometic Seastar Tube Nut 3/8"- 6 Pack

Teleflex Dometic outboard steering splashwell kit with 15° brackets Allows the steering cable to exit the splashwell without sacrificing splash protection  This cable connection is used for older model outboards without tilt tubes, low HP...

Lewmar has created a beautiful new range of chain stoppers made from cast 316 stainles steel, perfect for taking the load off your windlass allowing you to relax knowing you chain and anchor is secure. Windlasses are not designed to hold high loads...

The Lewmar 89400109 replacement, pedestal engine and throttle engine control mechanism kit to suit Lewmar Pedetal Steering  The engine control designed exclusively for Lewmar is non-magnetic and can be guardrail or pedestal mounted without...

Lofrans Control Box for 24v Windlassses with 500 -1700w Motors Specification Voltage : 24v Wattage Range : 500w-1700w Connections : 4 Terminals

Project X3 Windlass with Drum 472865 10mm gypsy 1700w 24vThe "X" vertical windlasses are suitable for sail and motor boats from 6m to 27m in length. They have different motorization attributes according to each model. For the X2 windlass and X3 windlass...

Lofrans Maintenance Kit for Project X2 Windlass -Keep your Lofrans windlass in good shape! The spare-part and maintenance kit for your Lofrans windlass contains all the necessary wear parts such as screws, seals, cotter pins, etc. Contents 4 x 226 4...