Accessories for Marine Electronics

The B&G 608 Networked Wind Sensor is designed as a direct replacement for existing compatible B&G wind sensors. Installed at the masthead, it provides accurate wind speed and wind angle information...

Replacement sun cover for the B&G Triton2 Display 

Don't let a missing propeller keep you from receiving accurate wind data. Garmin's replacement propeller ensures you can maintain the twin-fin technology with 3-bladed propeller the gWind™ family of...

Provide convenient remote mounting and a single access point for 2 SD™ card slots for mapping with our Garmin Card Reader. A water-resistant, magnetic door allows the card reader to be mounted...

Our marine network cables offer additional cable lengths to help with install. Various sizes sold separately.

The Navico NEP-2 provides five Ethernet ports to expand your system with additional displays and accessories. Connect multiple on-board displays to share charts, waypoints, routes, and built-in sonar...

Take remote control of your B&G V60 VHF radio, and enjoy the power of a fixed-mount system with the convenience of a handheld. Easily carried and simple to use, this wireless handset gives you total...

Fuel Flow Sensor for Gasoline only. One required per engine. Up to 3 engines supported. Specifications

The MI10 microSD card reader provides dual chart card slots for use with Simrad NSO evo2 marine processors and B&G Zeus² Glass Helm CPUs. Dual card slots allow simultaneous use of two different chart...

Garmin quatix 8 – 51 mm AMOLED Marine GPS Smartwatch The Garmin quatix 8 is a premium 51 mm marine GPS smartwatch designed for boating, sailing, watersports, fitness and everyday use. Its bright...

Complete 2 tasks with 1 cable using our charging/data clip. Connect the cable to your computer's USB port to recharge your compatible device and to transfer data to and from your computer. This cable...

Network your compatible GPSMAP® chartplotter with this NMEA 0183 data communication cable. Includes bare wires and an RCA connector for audio connection to any stereo setup, including FUSION.

Use our cover to protect your compatible ECHOMAP™ UHD2 from the harsh marine environment when not in use.

VHF Fist Mic Extention cable 5 m (16.5 ft ) Model 000-14923-001 comes with through bulkhead mounting plate .  

Lowrance 000-14041-001 Power Cable for Lowrance HDS, Elite-Ti and HOOK Displays Lowrance PC-HDI - power cable for all Lowrance devices with blue and red connectors. Suitable for all HDS, Elite Ti2...

Lowrance PC-30-RS422 is designed to provide reliable power supply to various Lowrance devices. Its 7-pin connector ensures compatibility with a wide range of devices, and the connector color options...

Protect your compatible marine device from the sun and scratches when not in use. This protective cover fits snugly over the display to avoid exposure.

Power and connect your compatible Garmin GPSMAP® device with this 8-pin power/data cable. Use with NMEA 0183 devices and a lamp or horn for visible or audible alerts.

The B&G Nemesis 9 Mast Bracket is a purpose-built mounting solution designed specifically for the B&G Nemesis™ 9 Sailing Display. Engineered for secure mast installation, this bracket provides...

2-way mast bracket for 20/20HV displays Features No fixings supplied  Space for two 20/20 HV B&G Displays

Use our cover to protect your compatible ECHOMAP Plus from the harsh marine environment when not in use.

Easily attach your compatible 4-, 8- or 12-pin transducer to the transom of your boat with this mount that provides excellent sonar returns at all speeds. Since the transducer is in the water at all...

Easily collect speed data and send it to your Garmin echo™ fishfinder with this water sensor. Simply mount the speed sensor on the transom of your vessel and connect it to your device. The paddle...

Connect your GPS device to your computer even if you don't h

The Garmin SteadyCast heading sensor is a simple, easy-to-install solution that provides fast calibration and premium heading accuracy. It aligns your boat bow to its actual orientation so you know...

ICOM CP-23L Cigarette Lighter Cable for use with ICOM cradle chargers BC-191, BC-193, BC-219/N, BC-225, BC-227 or BC-240

ICOM 6m extension cable for VHF hand microphones - Suits ICOM COMMANDMIC Models HM-162 HM-195 Icom is regarded as one of the World's leading radio manufacturers. The extensive ranges of products are...

The Simrad TP22 is a reliable and robust autopilot for tiller-steered boats up to 34ft in length. Low power draw and precise steering capabilities, coupled with minimal noise, allow you to enjoy some...

The Simrad TP32 is a reliable and robust autopilot for tiller steered boats up to 37ft in length. Low power draw and precise steering capabilities couple together with minimal noise, allowing you to...

Connect a thermal camera, underwater lighting or boat stabilizing system to a compatible GPSMAP® series Garmin chartplotter with this PoE (Power over Ethernet) isolation coupler. The coupler...

Protective screen and suncover for Simrad Cruise 7 Chartplotter 000-15068-001

Protective screen and suncover for Simrad Cruise 7 Chartplotter 000-15068-001 Specifications: Type: Covers Box Dimensions: 1"H x 6"W x 10"L WT: 0.25 lbs Weight: 0,143 kg Class Type: MFD

Protective screen and suncover for Simrad Cruise 5 Chartplotter Specifications Weight: 0,108 kg Dimensions: 17,8 × 34,5 × 0,108 cm Class Type: MFD

Deck or coachroof mounting bracket to suit all Trem Tubular Radar Reflectors In shockproof nylon complete with stanless steel fittings

xSonic 9 Pin transducer adapter cable to suit Lowrance HOOK², Hook Reveal and Simrad Cruise units (8 Pin)

Extend the cable length of your compatible transducer with this 10 ft (3 m) or 30 ft (9 m) cable.

ROKK Midi A multi-position, fully adjustable* mount for small electronic devices onboard. Install fish finders and chartplotters at the helm, RIB console, fishing boat dashboard, nav station and...

ROKK Midi A multi-position, fully adjustable* mount for small electronic devices onboard. Install fish finders and chartplotters at the helm, RIB console, fishing boat dashboard, nav station and...

A fully adjustable anodized aluminium mount that enables you to attach devices directly onto a rail, pushpit or pedestal. Compatible with a range of top plates that matches your marine electronics...

Combining features of Scanstrut's high-power Flip Pro USB-A / C Charger and 12V Power Sockets into a beautiful multi power solution. When not in use, the spring-loaded caps remain tightly closed,...