Accessories for Marine Electronics

Mount three Garmin GNX™ 120 marine instrument displays on your mast with this purpose-built carbon fibre mast bracket. Designed to create a sleek, integrated “glass mast” appearance, the bracket...

The Antisense A2K-4WD-1 NMEA 2000 4-Way Instrument Drop provides a compact and efficient way to connect up to four NMEA 2000 devices located in the same area. A conventional installation would...

Simrad MO16, MO19, and MO24 marine monitors (including touch models like MO16-T), this kit provides the essential power and serial connectors/plugs needed for secure, reliable connections in...

Perfectly designed for mounting in a cockpit pedestal, by the chart table or in other locations suiting a ‘portrait’ orient

Use our cover to protect your compatible 9" STRIKER device from the harsh marine environment when not in use.

Use the Garmin sun cover to protect your ECHOMAP UHD2 55cv from the harsh marine environment when not in use.

Get an extra 15 meters (49.21 feet) of length when using this cable with your GC 12 or GC 14 camera. This cable has male connectors on both ends.

The Garmin SD Card Reader (Part #010-1077700) is a marine accessory designed for convenient data management on older Garmin chartplotters and multifunction displays (such as the GPSMAP...

The Garmin NiMH Battery for gWind Wireless (010-12117-10) is a genuine Garmin replacement battery designed specifically for the gWind Wireless wind transducer system. In marine environments like...

Combine a Garmin transom mount scanning transducer with a Garmin in-hull mounted transducer (GT15-IH) . Use this Y-cable to connect a 12-pin SideVü/Clearvü-only transducer along with an 8-pin...

Use this adapter cable to connect an 8-pin transducer to a 12-pin sonar port on a compatible marine device.

The Garmin Protective Cover for echoMAP 5Xdv Series is designed to shield your compatible Garmin display from the harsh marine environment when not in use. Made from durable, high-quality materials,...

Our protective cover fits your compatible STRIKER, helping to keep it safe from the harsh marine environment when not in use.

Connect a 4-pin transducer to a 12-pin sonar port on your compatible marine device with this adapter cable.

The easy-to-use GRID 20 remote input device provides intuitive remote access and control of your entire Garmin marine system. It features a 360-degree joystick with a rotary knob and push-to-select...

The Garmin BlueNet 30 gateway is required for Garmin BlueNet™ network-compatible devices to network with legacy Garmin marine devices. Through this gateway, you can connect a Garmin Blue Net network...

Save space on your helm with the compact, water-resistant SD™ card reader. It holds two full-size SD cards for quick access to charts, software updates and ActiveCaptain® data. Featuring a 2”x 2”...

The Scanstrut Rail Pod provides a sleek and practical solution for mounting your MFD onto any standard or curved rail. Featuring waterproof internal cable routing, it allows cables to pass seamlessly...

Protect your Eagle 9 display from the harsh marine environment with this quality suncover from Lowrance   Features Co

Protect your Eagle 7 display from the harsh marine environment with this quality suncover from Lowrance

Protect your Eagle 5 display from the harsh marine environment with this quality suncover from Lowrance. Features Protects the marine environment Suncover for Eagle Displays

Protect your Eagle 4x display from the harsh marine environment with this quality suncover from Lowrance   Features Protects the marine environment Manufacturer advis

Garmin BlueNet network cable is used to connect a Garmin BlueNet 20 switch. Garmin BlueNet 30 gateways to each other, or other Garmin BlueNet network products.

The B&G 608 Networked Wind Sensor is designed as a direct replacement for existing compatible B&G wind sensors. Installed at the masthead, it provides accurate wind speed and wind angle information...

Replacement sun cover for the B&G Triton2 Display 

Don't let a missing propeller keep you from receiving accurate wind data. Garmin's replacement propeller ensures you can maintain the twin-fin technology with 3-bladed propeller the gWind™ family of...

Provide convenient remote mounting and a single access point for 2 SD™ card slots for mapping with our Garmin Card Reader. A water-resistant, magnetic door allows the card reader to be mounted...

Our marine network cables offer additional cable lengths to help with install. Various sizes sold separately.

The Navico NEP-2 provides five Ethernet ports to expand your system with additional displays and accessories. Connect multiple on-board displays to share charts, waypoints, routes, and built-in sonar...

Take remote control of your B&G V60 VHF radio, and enjoy the power of a fixed-mount system with the convenience of a handheld. Easily carried and simple to use, this wireless handset gives you total...

Fuel Flow Sensor for Gasoline only. One required per engine. Up to 3 engines supported. Specifications

The MI10 microSD card reader provides dual chart card slots for use with Simrad NSO evo2 marine processors and B&G Zeus² Glass Helm CPUs. Dual card slots allow simultaneous use of two different chart...

Garmin quatix 8 – 51 mm AMOLED Marine GPS Smartwatch The Garmin quatix 8 is a premium 51 mm marine GPS smartwatch designed for boating, sailing, watersports, fitness and everyday use. Its bright...

Complete 2 tasks with 1 cable using our charging/data clip. Connect the cable to your computer's USB port to recharge your compatible device and to transfer data to and from your computer. This cable...

Network your compatible GPSMAP® chartplotter with this NMEA 0183 data communication cable. Includes bare wires and an RCA connector for audio connection to any stereo setup, including FUSION.

Use our cover to protect your compatible ECHOMAP™ UHD2 from the harsh marine environment when not in use.

Lowrance 000-14041-001 Power Cable for Lowrance HDS, Elite-Ti and HOOK Displays Lowrance PC-HDI - power cable for all Lowrance devices with blue and red connectors. Suitable for all HDS, Elite Ti2...

Lowrance PC-30-RS422 is designed to provide reliable power supply to various Lowrance devices. Its 7-pin connector ensures compatibility with a wide range of devices, and the connector color options...

Protect your compatible marine device from the sun and scratches when not in use. This protective cover fits snugly over the display to avoid exposure.

Power and connect your compatible Garmin GPSMAP® device with this 8-pin power/data cable. Use with NMEA 0183 devices and a lamp or horn for visible or audible alerts.