Description
Epifanes Fiberglass Filler is a fast-drying, two-component filler designed for small repairs on steel and fiberglass. It can be applied in thick layers and is suitable for repairing and filling small irregularities above the waterline. On steel, it can be used for small repairs in paint systems above the waterline. Before use, After curing, the filler should be immediately sanded and overcoated with a 15–20% thinned sealer coat to prevent moisture from entering the filler. It can be recoated with all Epifanes one- and two-component products.The filler is available in white and is also available in grey with red hardener. Packing options are 500 g with a 20 g tube of white hardener and 1500 g with a 50 g tube of white hardener.
Features
- Suitable for steel and fibreglass
- Designed for small repairs
- Recoatable with all Epifanes one- and two-component products
- Repaintable in 5–10 minutes, depending on temperature and mixed filler volume
- Supplied with tube hardener
- Sealer coat application is recommended after curing to prevent moisture from entering the filler
Specifications
| Product Name | Epifanes Fibreglass Filler |
| Product Type | Two-component filler |
| Suitable Materials | Steel and fibreglass |
| Fibreglass Use | Repair and filling of small irregularities above the waterline |
| Steel Use | Small repairs in paint systems above the waterline |
| Application Thickness | Can be applied in thick layers |
| Repaintable | 5–10 minutes |
| Repaintability Depends On | Temperature and mixed filler volume |
| Recoating | All Epifanes one- and two-component products |
| Packing Option 1 | 500 g + 20 g tube white hardener |
| Packing Option 2 | 1500 g + 50 g tube white hardener |
| Post-Cure Preparation | Immediately sand after cure |
| Sealer Coat | 15–20% thinned sealer coat |





