Description
Epifanes PP Varnish Extra with UV Filter is a professional high-gloss base varnish for all types of wood. It is recommended as a sealer for oily woods such as teak and iroco. The varnish provides resistance to various chemicals, alcohols, soft drinks, water, and aliphatic and aromatic hydrocarbon solvents. It offers excellent flow and abrasion resistance, very quick drying, superior filling, and rapid build-up. Its elasticity makes it suitable for working wood such as masts.
Features
- Professional high-gloss base varnish for all types of wood
- Recommended sealer for oily woods, including teak and iroco
- Resistant to various chemicals, alcohols, soft drinks, and water
- Resistant to aliphatic and aromatic hydrocarbon solvents
- Excellent flow and abrasion resistance
- Very quick drying
- Superior filling and rapid build-up
- Provides sufficient elasticity for use on working wood, including masts
- Contains a high-quality UV filter
- Suitable for interior and exterior applications above the waterline
- Suitable as a base varnish, sealer, and grain-filling varnish
- Suitable for new work on bare solid wood and plywood
- Suitable as an isolating varnish on oily tropical wood
- Suitable for working wood
- Suitable for interior finishing of doors, panels, and kitchen furniture
- Suitable for maintenance of existing clear two-component varnishes
- For exterior use, advised to be overcoated with 2–3 coats of Epifanes Polyurethane Clear or Epifanes Clear Gloss Varnish for additional UV protection
Specifications
| Product Type | Professional Base Varnish |
| UV Protection | High-Quality UV Filter |
| Suitable Wood | All Types of Wood, Including Teak and Iroco |
| Application | Interior and Exterior Above the Waterline |
| Use | Base Varnish, Sealer, Grain-Filling Varnish |
| Brush Reducer | Epifanes Thinner for PP Varnish Extra (Fast); Epifanes Poly-urethane Brushthinner (Slow) |
| Spray Reducer | Epifanes Thinner for PP Varnish Extra (Fast); Epifanes Poly-urethane Spraythinner (Slow) |
| Recoat Time | Wet-on-Wet After 2–3 Hours at 20°C |
| Recoating Without Sanding | Within 48 Hours |
| Mixing Ratio by Volume and Weight | 1 Part Base Component A + 1 Part Curing Component B |





