MGDuff M10B Anode Fixing Stud - Zinc 10mm

Zinc Galvanised M10 Stud with fully welded plate, nuts, serrated washers & terminals. For wood and GRP vessels. Sold individually.

Use and Care

• Suits either zinc plated or stainless 316 mounting bolts (stainless place a larger, though not problematic, demand on the anode)
• With a stainless bolt it is normally easier to undo the nut to change the anodes at the end of the season.
• Ensure no bilge water is allowed to wet the bonding connection on the inside of the boat, bonding cable may start to corrode and develop high resistance
• Cover the connection with Vaseline or similar to protect the connection

Specifications

• Length: 110mm
• Stud Size: M10
• Terminals: 4mm2